feat: Adds tmux config to devcontainer-env.

.gitmodules

@@ -0,0 +1,6 @@
+[submodule "mail"]
+	path = mail
+	url = ssh://git@git.housh.dev:2222/michael/mail.git
+[submodule "env/.config/nvim"]
+	path = env/.config/nvim
+	url = https://github.com/m-housh/mhoush.nvim.git

.prettierrc

@@ -0,0 +1,4 @@
+{
+  "proseWrap": "always"
+  "printWidth": 100
+}

.prettierrc.yaml

@@ -1,2 +0,0 @@
-proseWrap: always
-printWidth: 80

README.md

@@ -1,20 +1,16 @@
 # My Dotfiles
 
-This is a repository for my dotfiles. Be warned that these may often change and
-that the installation documentation may not always be correct as things
-progress.  In general the setup process is something that is only done when
-a new machine is purchased or I feel like testing in a virtual machine (which
-does not happen often).  It is helpful to have an understanding of what these
-commands do on your own.
+This is a repository for my dotfiles. Be warned that these may often change and that the installation documentation may
+not always be correct as things progress. In general the setup process is something that is only done when a new machine
+is purchased or I feel like testing in a virtual machine (which does not happen often). It is helpful to have an
+understanding of what these commands do on your own.
 
-In general no pull-requests or changes will be accepted, however you can
-generate an issue if you find a problem.
+In general no pull-requests or changes will be accepted, however you can generate an issue if you find a problem.
 
 It currently will install homebrew and the following homebrew formula.
 
-Most of the functionality is contained in the
-[dots](https://github.com/m-housh/dots) project, that is a companion to manage
-the dotfiles, which expects the dotfiles directory to be at `~/.dotfiles`.
+Most of the functionality is contained in the [dots](https://github.com/m-housh/dots) project, that is a companion to
+manage the dotfiles, which expects the dotfiles directory to be at `~/.dotfiles`.
 
 ```
 fd
@@ -78,15 +74,14 @@ On a fresh system run the following command from the dotfiles root.
 make bootstrap
 ```
 
-This start by installing homebrew, then install the required homebrew formulas and casks.  Next it will use
-`gnu-stow` to symlink configuration files to the appropriate locations.  And finally, it will download
-applications from the `App Store`.  When the bootstrap command is done it will open up the `~/Downloads` folder
-for the few applications that get downloaded from the internet, so that you can finish the installation of those applications.
+This start by installing homebrew, then install the required homebrew formulas and casks. Next it will use `gnu-stow` to
+symlink configuration files to the appropriate locations. And finally, it will download applications from the
+`App Store`. When the bootstrap command is done it will open up the `~/Downloads` folder for the few applications that
+get downloaded from the internet, so that you can finish the installation of those applications.
 
 ### Minimal Setup
 
-If you would like to just setup minimal stuff, link dotfiles, and install brews.
-Then you can run the following command.
+If you would like to just setup minimal stuff, link dotfiles, and install brews. Then you can run the following command.
 
 ```bash
 make bootstrap-minimal
@@ -100,14 +95,13 @@ source scripts/setup_defaults
 
 ## Post Installation
 
-After everything has finished up, you will be able to open `iTerm2` and load
-the profile which should now be symlinked to `~/.config/macOS/iterm/profile.json`
+After everything has finished up, you will be able to open `iTerm2` and load the profile which should now be symlinked
+to `~/.config/macOS/iterm/profile.json`
 
 ## Make commands
 
-It is also possible to not do the full bootstrapping.  If you would only like
-to install homebrew (without any formula or casks) then you can run the following
-command.
+It is also possible to not do the full bootstrapping. If you would only like to install homebrew (without any formula or
+casks) then you can run the following command.
 
 ```
 make bootstrap-homebrew
@@ -115,13 +109,12 @@ make bootstrap-homebrew
 
 ## Other Make Commands
 
-If you would like to setup any specific `zsh` configuration that is only for
-the local machine then you can run the following command.
+If you would like to setup any specific `zsh` configuration that is only for the local machine then you can run the
+following command.
 
 ```bash
 make zshrc-local
 ```
 
-This will generate and symlink a file that you can use to extend the default
-`zshrc` configuration.  In general, I use this to set custom location for
-homebrew casks to be installed on certain machines.
+This will generate and symlink a file that you can use to extend the default `zshrc` configuration. In general, I use
+this to set custom location for homebrew casks to be installed on certain machines.

TODO.md

@@ -1,32 +1,59 @@
 # TODO
 
-- Add zsh functions to dots cli manager.
-- Add tmux plugins to dots cli manager.
-- Add tmux-powerline linking to `dots` cli manager.
-- Clean up zet commands, maybe make a gum / fzf filter script.
-- Update README to reflect ansible installation
-- Update ansible to do gpg installation.
-- Update ansible to include sketchybar.
+A list of in-progress and completed todo's.
 
-# Arch Todos
+## Arch Todos
 
-- Separate scripts that are used for configurations / store them somewhere aside
+- [ ] Update README, it's way out of date.
+- [x] Separate scripts that are used for configurations / store them somewhere aside
   from `~/.local/bin`
-- Clipse didn't work when installed on a new machine when I try to use the
+- [x] Add neomutt configuration files into the repo (or probably a private repo)
+- [x] Clipse didn't work when installed on a new machine when I try to use the
   config in the dotfiles, but works if I use the default config. Need to explore
   why (current thoughts are it has to do with creating the
   clipboard_history.json file and not letting clipse do it automatically).
-- Set sddm login theme, currently it doesn't allow me to echo values into the
-  /etc/sddm.conf file, also need to edit the theme in
-  `/usr/share/sddm/themes/catppuccin-mocha/theme.conf` to use the wallpaper as a
-  background image.
-  - Note: The background needs to be copied into the theme's background
-    directory. It didn't seem to work when I just set the path to somewhere in
-    my home directory.
-- Add script to generate yubikey authentication using the pam-u2f module
-  [documentation](https://wiki.archlinux.org/title/Universal_2nd_Factor).
-  - Note: that the directory this is stored in MUST be ~/.config/Yubico (I tried
-    using ~/.config/yubico and it didn't work)
-- Move keyboard (kanata) systemd service to be started as a '--user' service, as
+- [x] Need to add the following system packages for neovim/render-markdown.nvim
+    - [x] `libtexprintf`
+- [ ] Add pipewire-zeroconf to runs.
+    - [ ] Setup pipewire config to allow streaming output to homepod's.
+    - [See arch.wiki](https://wiki.archlinux.org/title/PipeWire)
+
+### Bootstrapping a new machine
+
+- [ ] Need to confirm bootstrap does things properly with git submodules.  Currently the
+    system run handles installing packages needed for my yubikey, probably need to automate
+    installing the public key into the keyring.
+    - [x] Add gpg public key import into `runs/after/system`
+    - [ ] Need to ensure ssh keys are setup before private submodules are loaded / installed,
+    so I need to make sure that Yubikey setup runs early and works for ssh authentication.
+    - [ ] Setup a new machine / virtual machine to test, as it's hard to test the scripts once a machine is setup.
+    - [ ] Need to add `repos` script when bootstrapping.
+
+### Keyboard / kanata
+
+- [x] Move keyboard (kanata) systemd service to be started as a '--user' service, as
   it seems to not work when used on a desktop (mac mini) vs. laptop.
-- Add neomutt configuration files into the repo (or probably a private repo)
+  - [x] Need to update kanatactl to generate udev rules, etc. (see
+        here)[https://github.com/jtroo/kanata/blob/main/docs/setup-linux.md]
+- [ ] Need to rethink symbol / number keyboard layers.
+    - [ ] Move symbols to their own layer.
+    - [ ] I would like to have a symbols layer that I can hold modifier keys with a symbol
+          and would also like to possibly pass through underlying key / experiment so that
+          I can use default keybinds in certain applications (i.e. neovim `[b`, etc.).  
+- [x] Remove pkg sub-commands from kanatactl, it is available via package manager now.
+
+### Runs (package installs)
+
+- [x] Should runs just export / echo a list of packages, then the `run` script can handle the package
+      manager options / command.
+- [x] Think about adding a `before` and an `after` directory for runs, so that they can perform setup tasks after
+      the packages are installed.
+    - [x] The `before` and `after` file should have the same name as the `run` file.
+    - [ ] This could allow to remove / move the `system` script into the `after` directory.
+- [ ] Look into install packages with `nvim --headless`, not sure if this possible when using the new package
+    manager builtin to neovim as it prompts for user input to install packages.
+    - With lazy this was done with `nvim --headless "+Lazy! sync" +qa`
+
+### Mail
+
+- [ ] Remove outlook / office email setup, this has been moved to proton.

bootstrap

@@ -4,8 +4,8 @@
 #
 
 if [ -z "$DEV_ENV" ]; then
-  echo "env var DEV_ENV needs to be present"
-  exit 1
+	echo "env var DEV_ENV needs to be present"
+	exit 1
 fi
 
 # if i just did DEV_ENV=$(pwd) ./run then this is needed for the rest of the
@@ -15,15 +15,16 @@ export DEV_ENV="$DEV_ENV"
 args=""
 
 while [[ $# -gt 0 ]]; do
-  if [[ "$1" =~ dry ]]; then
-    args="--dry-run"
-  fi
+	if [[ "$1" =~ dry ]]; then
+		args="--dry-run"
+	fi
 done
 
 echo "Args to bootstrap scripts: $args"
 echo "Installing packages may require your password multiple times."
 
-echo "Running packages" && $DEV_ENV/run "$args"
 echo "Installing configuration" && $DEV_ENV/dev-env "$args"
+# TODO: Need to run system run early, then once ssh keys are setup pull
+# 			git submodules, then run config install again.
+echo "Running packages" && $DEV_ENV/run "$args"
 echo "Installing webapps" && $DEV_ENV/webapp "$args"
-echo "Starting system services" && $DEV_ENV/system "$args"

dev-env

@@ -7,98 +7,108 @@
 dry_run="0"
 
 if [ -z "$XDG_CONFIG_HOME" ]; then
-  echo "no xdg config home"
-  echo "using ~/.config"
-  XDG_CONFIG_HOME=$HOME/.config
+	echo "no xdg config home"
+	echo "using ~/.config"
+	XDG_CONFIG_HOME=$HOME/.config
 fi
 
 if [ -z "$XDG_DATA_HOME" ]; then
-  echo "no xdg data home"
-  echo "using ~/.local/share"
-  XDG_DATA_HOME=$HOME/.local/share
+	echo "no xdg data home"
+	echo "using ~/.local/share"
+	XDG_DATA_HOME=$HOME/.local/share
 fi
 
 if [ -z "$DEV_ENV" ]; then
-  echo "env var DEV_ENV needs to be present"
-  exit 1
+	echo "env var DEV_ENV needs to be present"
+	exit 1
 fi
 
 if [[ $1 =~ ^--dry ]]; then
-  dry_run="1"
+	dry_run="1"
 fi
 
 log() {
-  if [[ $dry_run == "1" ]]; then
-    echo "[DRY_RUN]: $1"
-  else
-    echo "$1"
-  fi
+	if [[ $dry_run == "1" ]]; then
+		echo "[DRY_RUN]: $1"
+	else
+		echo "$1"
+	fi
 }
 
 log "env: $DEV_ENV"
 
 # Removes a destination directory and copies all files to the destination.
 update_dirs() {
-  log "copying over files from: $1"
-  pushd $1 &>/dev/null
-  (
-    # Copy everything except systemd, share, and zsh folders, they need treated differently.
-    configs=$(
-      find . -mindepth 1 -maxdepth 1 -type d \
-        \( -name "systemd" -o -name "zsh" -o -name "share" -o -name "scripts" -o -name "kanata" \) \
-        -prune -o -type d -print
-    )
-    for c in $configs; do
-      directory=${2%/}/${c#./}
-      log "    removing: rm -rf $directory"
+	log "copying over files from: $1"
+	pushd $1 &>/dev/null
+	(
+		# Copy everything except systemd, share, and zsh folders, they need treated differently.
+		configs=$(
+			find . -mindepth 1 -maxdepth 1 -type d \
+				\( -name "systemd" -o -name "zsh" -o -name "share" -o -name "scripts" -o -name "kanata" \) \
+				-prune -o -type d -print
+		)
+		for c in $configs; do
+			directory=${2%/}/${c#./}
+			log "    removing: rm -rf $directory"
 
-      if [[ $dry_run == "0" ]]; then
-        rm -rf $directory
-      fi
+			if [[ $dry_run == "0" ]]; then
+				rm -rf $directory
+			fi
 
-      log "    copying env: cp $c $2"
-      if [[ $dry_run == "0" ]]; then
-        cp -r ./$c $2
-      fi
-    done
+			log "    copying env: cp $c $2"
+			if [[ $dry_run == "0" ]]; then
+				cp -r ./$c $2
+			fi
+		done
 
-  )
-  popd &>/dev/null
+	)
+	popd &>/dev/null
 }
 
 # Removes a destination file and copies a single file to the destination.
 copy() {
-  log "removing: $2"
-  if [[ $dry_run == "0" ]]; then
-    rm $2 &>/dev/null
-  fi
-  log "copying: $1 to $2"
-  if [[ $dry_run == "0" ]]; then
-    cp $1 $2
-  fi
+	log "removing: $2"
+	if [[ $dry_run == "0" ]]; then
+		rm $2 &>/dev/null
+	fi
+	log "copying: $1 to $2"
+	if [[ $dry_run == "0" ]]; then
+		cp $1 $2
+	fi
 }
 
 # Copy all files from a directory into another directory.
 copy_files() {
-  log "copying over files from: $1"
-  pushd "$1" &>/dev/null || exit 1
-  (
-    for f in $(find . -mindepth 1 -maxdepth 1 -type f); do
+	log "copying over files from: $1"
+	pushd "$1" &>/dev/null || exit 1
+	(
+		for f in $(find . -mindepth 1 -maxdepth 1 -type f); do
 
-      declare dest
-      dest="$2/$(basename "$f")"
+			declare dest
+			dest="$2/$(basename "$f")"
 
-      if [[ $dry_run == "0" ]]; then
-        rm -rf $dest >/dev/null 2>&1
-      fi
+			if [[ $dry_run == "0" ]]; then
+				rm -rf $dest >/dev/null 2>&1
+			fi
 
-      log "    copying env: cp $f $dest"
-      if [[ $dry_run == "0" ]]; then
-        cp $f $dest
-      fi
-    done
-  )
-  popd &>/dev/null || exit 1
+			log "    copying env: cp $f $dest"
+			if [[ $dry_run == "0" ]]; then
+				cp $f $dest
+			fi
+		done
+	)
+	popd &>/dev/null || exit 1
+}
+
+email() {
+	if command -v mailctl; then
+		log "Updating using mailctl..."
+		[[ $dry_run == "0" ]] && mailctl update && mailctl config
+	else
+		log "Installing mailctl..."
+		[[ $dry_run == "0" ]] && . "$DEV_ENV/mail/install"
+	fi
 }
 
 ############################## MAIN ##############################
@@ -109,9 +119,12 @@ update_dirs $DEV_ENV/env/.local $HOME/.local
 
 # SCRIPTS
 mkdir -p ~/.local/scripts/{hypr,utils} >/dev/null 2>&1
-mkdir -p ~/.local/scripts/utils/kanatactl >/dev/null 2>&1
+mkdir -p ~/.local/scripts/utils/{kanatactl,hpa,shorten-url} >/dev/null 2>&1
 update_dirs $DEV_ENV/env/.local/scripts/hypr $HOME/.local/scripts/hypr
+copy_files $DEV_ENV/env/.local/scripts/hypr $HOME/.local/scripts/hypr
 copy_files "$DEV_ENV/env/.local/scripts/utils/kanatactl" "$HOME/.local/scripts/utils/kanatactl"
+copy_files "$DEV_ENV/env/.local/scripts/utils/hpa" "$HOME/.local/scripts/utils/hpa"
+copy_files "$DEV_ENV/env/.local/scripts/utils/shorten-url" "$HOME/.local/scripts/utils/shorten-url"
 copy_files $DEV_ENV/env/.local/scripts $HOME/.local/scripts
 
 # SYSTEMD
@@ -141,6 +154,8 @@ copy_files $DEV_ENV/env/wallpapers $HOME/wallpapers
 mkdir $HOME/Pictures >/dev/null 2>&1
 mkdir -p $XDG_DATA_HOME/clipse/tmp_files
 copy $DEV_ENV/dev-env $HOME/.local/scripts/dev-env
+copy $DEV_ENV/env/.markdownlint.jsonc $HOME/.markdownlint.jsonc
+copy $DEV_ENV/env/.prettierrc $HOME/.prettierrc
 
 mkdir -p $XDG_DATA_HOME/applications/icons
 copy_files $DEV_ENV/env/.local/share/applications $XDG_DATA_HOME/applications
@@ -150,9 +165,12 @@ copy_files $DEV_ENV/env/.local/share/applications/icons $XDG_DATA_HOME/applicati
 mkdir $HOME/pkgbuilds
 update_dirs $DEV_ENV/env/pkgbuilds $HOME/pkgbuilds
 
+# Email.
+email
+
 if [[ $dry_run == "0" ]]; then
-  systemctl --user daemon-reload
-  hyprctl reload
-  espanso service restart
-  exec zsh -l
+	systemctl --user daemon-reload
+	hyprctl reload
+	espanso service restart
+	exec zsh -l
 fi

devcontainer-env

@@ -0,0 +1,76 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# Intsalls appropriate dotfiles inside a devcontainer context.
+
+XDG_CONFIG_HOME=${XDG_CONFIG_HOME:-"$HOME/.config"}
+DEV_ENV=${DEV_ENV:-""}
+
+if [ ! -d "$DEV_ENV" ]; then
+	echo "[ERROR]: DEV_ENV variable does not exist."
+	exit 1
+fi
+
+log() {
+	echo "$*"
+}
+
+copy_dir() {
+	local dir=${1:-""}
+	local path="${DEV_ENV}/${dir}"
+
+	if [ -z "$dir" ] || [ ! -d "$path" ]; then
+		log "[ERROR]: Directory does not exist: $dir"
+		exit 1
+	else
+		log "Copying dir: $dir"
+		cp -R "$path" "$XDG_CONFIG_HOME"
+	fi
+}
+
+copy_file() {
+	local file=${1:-""}
+
+	if [[ -z "$file" ]] || [[ ! -f "$file" ]]; then
+		log "[ERROR]: file does not exist: $file"
+		exit 1
+	else
+		log "Copying file: $file"
+		cp "$DEV_ENV/$file" "$HOME"
+	fi
+}
+
+# MAIN
+dirs=(
+	env/.config/eza
+	env/.config/git
+	env/.config/ripgrep
+	env/.config/starship
+	env/.config/yazi
+	env/.config/zsh
+)
+
+files=(
+	env/.markdownlint.jsonc
+	env/.prettierrc
+	env/.tmux.conf
+	env/.zshenv
+)
+
+for dir in "${dirs[@]}"; do
+	copy_dir "$dir"
+done
+
+for file in "${files[@]}"; do
+	copy_file "$file"
+done
+
+# Install neovim config
+git submodule update --init --remote env/.config/nvim
+source env/.config/nvim/install.sh
+
+# Install my scripts
+cp -R env/.local/scripts "$HOME/.local"

env/.config/aap/config.toml

@@ -0,0 +1,75 @@
+# This config is setup for running inside the docker container.
+#
+# NOTE:
+# Configuration settings for the `hpa` command line tool.
+# You can delete settings that are not applicable to your use case.
+
+# Default arguments / options that get passed into `ansible-playbook` commands.
+# WARNING: Do not put arguments / options that contain spaces in the same string,
+#          they should be separate strings, for example do not do something like
+#          ['--tags debug'], instead use ['--tags', 'debug'].
+#
+args = ['--tags', 'debug']
+
+# Set to true if you want to pass the vault args to `ansible-playbook` commands.
+useVaultArgs = true
+
+# NOTE:
+# Configuration for running the generate command(s). This allows custimizations
+# to the files that get used to generate the final output (generally a pdf).
+# See `pandoc --help`.  Below are the defaults that get used, which only need
+# adjusted if your template does not follow the default template design or if
+# you add extra files to your template that need to be included in the final
+# output. Also be aware that any of the files specified in the `files` or
+# `includeInHeader` options, need to be inside the `buildDirectory` when generating
+# the final output file.
+
+# [generate]
+# this relative to the project directory.
+# buildDirectory = '.build'
+# pdfEngine = 'xelatex'
+# includeInHeader = [
+#   'head.tex',
+#   'footer.tex'
+# ]
+# files = [
+#   'Report.md',
+#   'Definitions.md'
+# ]
+# outputFileName = 'Report'
+
+# NOTE:
+# These are more for local development of the ansible playbook and should not be needed
+# in most cases. Uncomment the lines if you want to customize the playbook and use it
+# instead of the provided / default playbook.
+
+[playbook]
+directory = '/root/.local/share/hpa/playbook'
+inventory = '/root/.local/share/hpa/playbook/inventory.ini'
+version = 'main'
+
+# NOTE:
+# These are to declare where your template files are either on your local system or
+# a remote git repository.
+[template]
+# The directory path on your local system to the template files.
+directory = '/root/.local/share/hpa/airflow-assessment-template'
+vars = 'repo_vars'
+
+# The url to a git repository that contains your template files.
+# url = 'https://git.example.com/consult-template.git'
+
+# The version, tag, branch, or sha of the template files to clone from the remote
+# template repository. In general it is best practice to use a version instead of a
+# branch.
+# version = '1.0.0'
+
+# NOTE:
+# Holds settings for `ansible-vault` commands.
+[vault]
+# Arguments to pass to commands that use `ansible-vault`, such as encrypting or decrypting
+# files.
+args = ['--vault-password-file=/run/secrets/vault-pass']
+
+# An id to use when encrypting `ansible-vault` files.
+#encryptId = 'myId'

env/.config/ghostty/config

@@ -3,7 +3,7 @@ theme = Catppuccin Mocha
 confirm-close-surface = false
 
 font-family = "Fira Code"
-font-size = 13
+font-size = 18
 font-thicken = false
 
 window-save-state = always

env/.config/git/config

@@ -8,6 +8,7 @@
 [user]
 	name = Michael Housh
 	email = michael@mhoush.com
+  signingkey = 0x90D3EB6274D5B7CF
 
 [commit]
 	gpgsign = true
@@ -29,6 +30,7 @@
   default = simple
 	autoSetupRemote = true
   followTags = true
+	recurseSubmodules = on-demand
 
 [fetch]
 	prune = true
@@ -64,3 +66,6 @@
   autoSquash = true
   autoStash = true
   updateRefs = true
+
+[submodule]
+	recurse = true

env/.config/hpa/config.toml

@@ -0,0 +1,75 @@
+# This config is setup for running inside the docker container.
+#
+# NOTE:
+# Configuration settings for the `hpa` command line tool.
+# You can delete settings that are not applicable to your use case.
+
+# Default arguments / options that get passed into `ansible-playbook` commands.
+# WARNING: Do not put arguments / options that contain spaces in the same string,
+#          they should be separate strings, for example do not do something like
+#          ['--tags debug'], instead use ['--tags', 'debug'].
+#
+args = ['--tags', 'debug']
+
+# Set to true if you want to pass the vault args to `ansible-playbook` commands.
+useVaultArgs = true
+
+# NOTE:
+# Configuration for running the generate command(s). This allows custimizations
+# to the files that get used to generate the final output (generally a pdf).
+# See `pandoc --help`.  Below are the defaults that get used, which only need
+# adjusted if your template does not follow the default template design or if
+# you add extra files to your template that need to be included in the final
+# output. Also be aware that any of the files specified in the `files` or
+# `includeInHeader` options, need to be inside the `buildDirectory` when generating
+# the final output file.
+
+# [generate]
+# this relative to the project directory.
+# buildDirectory = '.build'
+# pdfEngine = 'xelatex'
+# includeInHeader = [
+#   'head.tex',
+#   'footer.tex'
+# ]
+# files = [
+#   'Report.md',
+#   'Definitions.md'
+# ]
+# outputFileName = 'Report'
+
+# NOTE:
+# These are more for local development of the ansible playbook and should not be needed
+# in most cases. Uncomment the lines if you want to customize the playbook and use it
+# instead of the provided / default playbook.
+
+[playbook]
+directory = '/root/.local/share/hpa/playbook'
+inventory = '/root/.local/share/hpa/playbook/inventory.ini'
+version = 'main'
+
+# NOTE:
+# These are to declare where your template files are either on your local system or
+# a remote git repository.
+[template]
+# The directory path on your local system to the template files.
+directory = '/root/.local/share/hpa/template'
+vars = 'repo_vars'
+
+# The url to a git repository that contains your template files.
+# url = 'https://git.example.com/consult-template.git'
+
+# The version, tag, branch, or sha of the template files to clone from the remote
+# template repository. In general it is best practice to use a version instead of a
+# branch.
+# version = '1.0.0'
+
+# NOTE:
+# Holds settings for `ansible-vault` commands.
+[vault]
+# Arguments to pass to commands that use `ansible-vault`, such as encrypting or decrypting
+# files.
+args = ['--vault-password-file=/run/secrets/vault-pass']
+
+# An id to use when encrypting `ansible-vault` files.
+#encryptId = 'myId'

env/.config/hypr/hyprautostart.conf

@@ -6,11 +6,10 @@
 # Autostart necessary processes (like notifications daemons, status bars, etc.)
 # Or execute your favorite apps at launch like this:
 
-exec-once = pidof hyprpaper | uwsm app -- hyprpaper
+exec-once = uwsm app -- hyprpaper
 exec-once = pidof hypridle | uwsm app -- hypridle
-exec-once = uwsm app -- elephant
-exec-once = uwsm app -- swaync
-exec-once = uwsm app -- walker --gapplication-service &
-exec-once = uwsm app -- waybar
+exec-once = pidof hyprlauncher | uwsm app -- hyprlauncher -d
+exec-once = pidof swaync | uwsm app -- swaync
+exec-once = pidof waybar | uwsm app -- waybar
 exec-once = uwsm app -- clipse -listen
 

env/.config/hypr/hyprenv.conf

@@ -18,7 +18,7 @@ env = ELECTRON_OZONE_PLATFORM_HINT,wayland
 env = OZONE_PLATFORM,wayland
 env = XDG_SESSION_TYPE,wayland
 
-env = GDK_SCALE=2
+env = GDK_SCALE,2
 
 # Allow better support for screen sharing (Google Meet, Discord, etc)
 env = XDG_CURRENT_DESKTOP,Hyprland

env/.config/hypr/hyprinput.conf

@@ -10,7 +10,7 @@ input {
     kb_options = ctrl:nocaps
     kb_rules =
 
-    repeat_rate = 35
+    repeat_rate = 50
     repeat_delay = 200
 
     follow_mouse = 2
@@ -24,9 +24,9 @@ input {
 }
 
 # https://wiki.hyprland.org/Configuring/Variables/#gestures
-gestures {
-    workspace_swipe = false
-}
+# gestures {
+#     workspace_swipe = false
+# }
 
 # Example per-device config
 # See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more

env/.config/hypr/hyprkeybinds.conf

@@ -14,9 +14,9 @@ $terminal = uwsm app -- ghostty
 $browser = uwsm app -- brave
 $fileManager = $terminal -e yazi
 $fileBrowser = uwsm app -- nautilus
-$menu = uwsm app -- walker
+$menu = hyprlauncher
 $scripts = ~/.local/scripts/hypr
-$pwa = $scripts/launch-webapp
+$pwa = $scripts/webapp launch
 $tmuxSessionator = ~/.local/scripts/tmux-sessionator
 $clipboardHistory = com.ghostty.clipse $terminal --class=com.ghostty.clipse -e clipse
 $uninstallDesktop = $terminal --class=com.ghostty.float -e $scripts/uninstall-desktop-app
@@ -41,9 +41,9 @@ bindd = $mainMod,       A,      [A]i - launch / focus,                    exec,
 bindd = $mainMod SHIFT, A,      [A]i - new window,                        exec, $pwa "https://ollama.housh.dev"
 bindd = $mainMod,       B,      New [b]rowser,                            exec, $browser
 bindd = $mainMod SHIFT, B,      New private [b]rowser,                    exec, $browser --incognito
-bindd = $mainMod,       C,      [C]alendar,                               exec, $pwa --or-focus "https://www.icloud.com/calendar"
+bindd = $mainMod,       C,      [C]alendar,                               togglespecialworkspace, calendar
 bindd = $mainMod SHIFT, C,      [C]onfig folder in tmux session,          exec, $terminal -e $tmuxSessionator ~/.config
-bindd = $mainMod,       D,      [D]ispatch app - special workspace,       exec, $pwa --special dispatch $housecallPro
+bindd = $mainMod,       D,      [D]ispatch app - special workspace,       togglespecialworkspace, dispatch
 bindd = $mainMod SHIFT, D,      [D]ispatch app - new window,              exec, $pwa --new $housecallPro
 bindd = $mainMod,       E,      [E]mail - personal,                       exec, $pwa --or-focus "https://mail.proton.me"
 bindd = $mainMod SHIFT, E,      [E]mail - work,                           exec, $scripts/launch --or-focus thunderbird uwsm app -- thunderbird
@@ -53,14 +53,15 @@ bindd = $mainMod,       G,      [G]itea,                                  exec,
 bindd = $mainMod SHIFT, G,      [G]ithub,                                 exec, $pwa --or-focus "https://github.com"
 bindd = $mainMod,       H,      Focus window - left,                      movefocus, l # move window focus using vim keys
 bindd = $mainMod SHIFT, H,      Workspace - back,                         workspace, -1
+bindd = $mainMod,       I,      Localsend,                                exec, $scripts/launch --or-close localsend uwsm app -- localsend
 bindd = $mainMod,       J,      Focus window - down,                      movefocus, d # move window focus using vim keys
 bindd = $mainMod,       K,      Focus window - up,                        movefocus, u # move window focus using vim keys
 bindd = $mainMod,       L,      Focus window - right,                     movefocus, r # move window focus using vim keys
 bindd = $mainMod SHIFT, L,      Workspace - forward,                      workspace, +1
-bindd = $mainMod,       M,      [M]usic - apple,                          exec, $pwa --special music "https://music.apple.com"
+bindd = $mainMod,       M,      [M]usic - jellyfin-tui,                   togglespecialworkspace, music
 bindd = $mainMod SHIFT, M,      [M]enu bar - toggle visible,              exec, $scripts/waybarctl --toggle
 bindd = $mainMod,       O,      Purchase [o]rders,                        exec, $pwa --special dispatch "https://po.housh.dev"
-bindd = $mainMod,       P,      [P]assword manager,                       exec, $pwa --special pass "https://pass.proton.me"
+bindd = $mainMod,       P,      [P]assword manager,                       togglespecialworkspace, pass
 bindd = $mainMod SHIFT, P,      [P]hotos,                                 exec, $pwa --or-focus "https://photos.housh.dev"
 bindd = $mainMod SHIFT, R,      [R]estart menu bar,                       exec, $scripts/waybarctl --restart
 bindd = $mainMod,       S,      Toggle [s]pecial workspace,               togglespecialworkspace, magic  # use $windowMod S to send window to the special workspace

env/.config/hypr/hyprland.conf

@@ -6,12 +6,13 @@
 # Refer to the wiki for more information.
 # https://wiki.hyprland.org/Configuring/
 
-source = ~/.config/hypr/env.conf
-source = ~/.config/hypr/monitors.conf
-source = ~/.config/hypr/windows.conf
-source = ~/.config/hypr/keybinds.conf
-source = ~/.config/hypr/input.conf
-source = ~/.config/hypr/autostart.conf
+source = ~/.config/hypr/hyprenv.conf
+source = ~/.config/hypr/hyprmonitors.conf
+source = ~/.config/hypr/hyprwindows.conf
+source = ~/.config/hypr/hyprworkspaces.conf
+source = ~/.config/hypr/hyprkeybinds.conf
+source = ~/.config/hypr/hyprinput.conf
+source = ~/.config/hypr/hyprautostart.conf
 
 #####################
 ### LOOK AND FEEL ###

env/.config/hypr/hyprlauncher.conf

@@ -0,0 +1,2 @@
+
+desktop_launch_prefix = uwsm app --

env/.config/hypr/hyprmonitors.conf

@@ -4,7 +4,5 @@
 
 # See https://wiki.hyprland.org/Configuring/Monitors/
 monitor= ,preferred,auto,auto
-#monitor = HDMI-A-1, preferred, 0x0, auto
-#monitor = HDMI-A-1, preferred, 0x0, 1.66667
 
 

env/.config/hypr/hyprtoolkit.conf

@@ -0,0 +1,8 @@
+background = rgb(1e1e2e)
+base = rgb(b4befe)
+alternate_base = rgb(cdd6f4)
+text = rgb(cdd6f4)
+bright_text = rgb(89b4fa)
+accent = rgb(b4befe)
+accent_secondary = rgb(cba6f7)
+

env/.config/hypr/hyprwindows.conf

@@ -0,0 +1,47 @@
+###############
+### WINDOWS ###
+###############
+
+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+
+# windowrule = float, tag:floating-window
+# windowrule = center, tag:floating-window
+# windowrule = size 60% 60%, tag:floating-window
+#
+# # Weather tui
+# windowrule = float, class:^(com.ghostty.weather)$
+# windowrule = center, class:^(com.ghostty.weather)$
+# windowrule = size 90% 80%, class:^(com.ghostty.weather)$
+#
+# # Force windows to be a floating window
+# windowrule = tag +floating-window, class:^(blueberry.py|org.gnome.Nautilus|com.ghostty.float)$
+# windowrule = tag +floating-window, class:^(com.ghostty.windowctl)$
+# windowrule = tag +floating-window, class:^(com.ghostty.utils-launcher)$
+# windowrule = tag +floating-window, class:^(com.ghostty.homelab-launcher)$
+#
+# # Force to stay focused when visible.
+# windowrule = stayfocused, class:(blueberry.py)
+# windowrule = stayfocused, class:Pinentry.gtk
+# windowrule = stayfocused, class:com.ghostty.float
+# windowrule = stayfocused, class:com.ghostty.windowctl
+# windowrule = stayfocused, class:^(com.ghostty.utils-launcher)$
+#
+# # Clipboard history tui in floating window.
+# windowrule = tag +floating-window, class:.*clipse.*
+# windowrule = stayfocused, class:.*clipse.*
+#
+# # Ignore maximize requests from apps. You'll probably like this.
+# windowrule = suppressevent maximize, class:.*
+#
+# # Just a dash of opacity by default.
+# windowrule = opacity 0.97 0.92, class:.*
+# # No opacity on youtube.
+# windowrule = opacity 1.0, class:.*youtube.com.*
+#
+# # Fix some dragging issues with XWayland
+# windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
+#
+# # To get more information about a window’s class, title, XWayland status or its size, you can use `hyprctl clients`. (From Hyprland Wiki)
+# windowrulev2 = float,class:^(one.alynx.showmethekey)$
+# windowrulev2 = float,class:^(showmethekey-gtk)$ # make window floating
+# windowrulev2 = pin,class:^(showmethekey-gtk)$ # pin window

env/.config/hypr/hyprworkspaces.conf

@@ -0,0 +1,15 @@
+##################
+### WORKSPACES ###
+##################
+
+# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+
+$scripts = ~/.local/scripts/hypr
+$pwa = $scripts/webapp launch
+$housecallPro = $pwa "https://pro.housecallpro.com/app/calendar_new"
+
+workspace = special:hidden, invisible
+workspace = special:pass,on-created-empty: $pwa "https://pass.proton.me"
+workspace = special:dispatch,on-created-empty: $housecallPro && $housecallPro
+workspace = special:music,on-created-empty: ghostty --class=com.ghostty.music -e jellyfin-tui
+workspace = special:calendar,on-created-empty: uwsm app -- gnome-calendar

env/.config/hypr/windows.conf

@@ -1,48 +0,0 @@
-##############################
-### WINDOWS AND WORKSPACES ###
-##############################
-
-# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
-# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
-#
-
-windowrule = float, tag:floating-window
-windowrule = center, tag:floating-window
-windowrule = size 60% 60%, tag:floating-window
-
-# Weather tui
-windowrule = float, class:^(com.ghostty.weather)$
-windowrule = center, class:^(com.ghostty.weather)$
-windowrule = size 90% 80%, class:^(com.ghostty.weather)$
-
-# Force windows to be a floating window
-windowrule = tag +floating-window, class:^(blueberry.py|org.gnome.Nautilus|com.ghostty.float)$
-windowrule = tag +floating-window, class:^(com.ghostty.windowctl)$
-windowrule = tag +floating-window, class:^(com.ghostty.utils-launcher)$
-windowrule = tag +floating-window, class:^(com.ghostty.homelab-launcher)$
-
-# Force to stay focused when visible.
-windowrule = stayfocused, class:(blueberry.py)
-windowrule = stayfocused, class:Pinentry.gtk
-windowrule = stayfocused, class:com.ghostty.float
-windowrule = stayfocused, class:com.ghostty.windowctl
-windowrule = stayfocused, class:^(com.ghostty.utils-launcher)$
-
-# Clipboard history tui in floating window.
-windowrule = tag +floating-window, class:.*clipse.*
-windowrule = stayfocused, class:.*clipse.*
-
-# Ignore maximize requests from apps. You'll probably like this.
-windowrule = suppressevent maximize, class:.*
-
-# Just a dash of opacity by default.
-windowrule = opacity 0.97 0.92, class:.*
-# No opacity on youtube.
-windowrule = opacity 1.0, class:.*youtube.com.*
-
-# Fix some dragging issues with XWayland
-windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
-
-workspace = special:hidden, invisible
-workspace = special:pass, class:.*pass.proton.me.*
-workspace = special:dispatch, class:.*pro.housecallpro.com.*

env/.config/hypr/workspaces.conf

@@ -1,14 +0,0 @@
-
-# Set work spaces 1-5 to be on external monitor
-workspace = 1, monitor:1
-workspace = 2, monitor:1
-workspace = 3, monitor:1
-workspace = 4, monitor:1
-workspace = 5, monitor:1
-
-# Set work spaces 6-10 to be on internal monitor
-workspace = 6, monitor:0
-workspace = 7, monitor:0
-workspace = 8, monitor:0
-workspace = 9, monitor:0
-workspace = 10, monitor:0

env/.config/kanata/voyager.kbd

@@ -27,7 +27,7 @@
 ;; Variables
 (defvar
  tap-higher 400
- tap-time 200
+ tap-time 150
  tap-time-plus 300
  hold-time-plus 300
  hold-time 200

env/.config/nvim/.gitignore

@@ -1,8 +0,0 @@
-tt.*
-.tests
-doc/tags
-debug
-.repro
-foo.*
-*.log
-data

env/.config/nvim/.neoconf.json

@@ -1,15 +0,0 @@
-{
-  "neodev": {
-    "library": {
-      "enabled": true,
-      "plugins": true
-    }
-  },
-  "neoconf": {
-    "plugins": {
-      "lua_ls": {
-        "enabled": true
-      }
-    }
-  }
-}

env/.config/nvim/LICENSE

@@ -1,201 +0,0 @@
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

env/.config/nvim/README.md

@@ -1,4 +0,0 @@
-# 💤 LazyVim
-
-A starter template for [LazyVim](https://github.com/LazyVim/LazyVim).
-Refer to the [documentation](https://lazyvim.github.io/installation) to get started.

env/.config/nvim/after/ftplugin/markdown.lua

@@ -1,20 +0,0 @@
--- Markdown specific key maps.
---
-local todos = require("todo-comments")
-local keywords = { "WARN", "WARNING", "IMPORTANT" }
-
--- Show all the warnings in the quick fix list.
-vim.keymap.set(
-	"n",
-	"<leader>tw",
-	"<CMD>Trouble todo toggle filter = {tag = {WARN, IMPORTANT}}<CR>",
-	{ desc = "[T]odo [W]arnings" }
-)
-
-vim.keymap.set("n", "]w", function()
-	todos.jump_next({ keywords = keywords })
-end, { desc = "Next [W]arning" })
-
-vim.keymap.set("n", "[w", function()
-	todos.jump_prev({ keywords = keywords })
-end, { desc = "Previous [W]arning" })

env/.config/nvim/after/ftplugin/swift.lua

@@ -1,2 +0,0 @@
-vim.opt.tabstop = 2
-vim.opt.shiftwidth = 2

env/.config/nvim/init.lua

@@ -1,15 +0,0 @@
--- bootstrap lazy.nvim, LazyVim and your plugin
-vim.g.netrw_browsex_viewer = "xdg-open"
-
-require("config.lazy")
-
-vim.filetype.add({
-  pattern = {
-    [".*"] = function(path, bufnr)
-      local first_line = vim.api.nvim_buf_get_lines(bufnr, 0, 1, false)[1] or ""
-      if first_line:match("^#!.*zsh") then
-        return "bash"
-      end
-    end,
-  },
-})

env/.config/nvim/lazyvim.json

@@ -1,27 +0,0 @@
-{
-  "extras": [
-    "lazyvim.plugins.extras.coding.mini-snippets",
-    "lazyvim.plugins.extras.coding.mini-surround",
-    "lazyvim.plugins.extras.editor.fzf",
-    "lazyvim.plugins.extras.editor.harpoon2",
-    "lazyvim.plugins.extras.formatting.prettier",
-    "lazyvim.plugins.extras.lang.ansible",
-    "lazyvim.plugins.extras.lang.clangd",
-    "lazyvim.plugins.extras.lang.cmake",
-    "lazyvim.plugins.extras.lang.docker",
-    "lazyvim.plugins.extras.lang.git",
-    "lazyvim.plugins.extras.lang.json",
-    "lazyvim.plugins.extras.lang.markdown",
-    "lazyvim.plugins.extras.lang.sql",
-    "lazyvim.plugins.extras.lang.tailwind",
-    "lazyvim.plugins.extras.lang.tex",
-    "lazyvim.plugins.extras.lang.toml",
-    "lazyvim.plugins.extras.lang.yaml",
-    "lazyvim.plugins.extras.util.startuptime"
-  ],
-  "install_version": 8,
-  "news": {
-    "NEWS.md": "11866"
-  },
-  "version": 8
-}

env/.config/nvim/lua/config/autocmds.lua

@@ -1,86 +0,0 @@
-local defaultGroupOptions = { clear = true }
-local markdownGroup = vim.api.nvim_create_augroup("MyMarkdownGroup", defaultGroupOptions)
-local createCmd = vim.api.nvim_create_autocmd
-
-createCmd("BufEnter", {
-  pattern = "*.md",
-  group = markdownGroup,
-  callback = function(_)
-    -- HACK: Set filetype to markdown for '.md' files.
-    -- Not sure why it doesn't detect these as markdown files, but this fixes the issue.
-    vim.cmd.setlocal("filetype=markdown")
-    vim.cmd.setlocal("textwidth=120")
-    vim.cmd.setlocal("spell spelllang=en_us")
-  end,
-})
-
--- Hyprlang LSP
-vim.api.nvim_create_autocmd({ "BufEnter", "BufWinEnter" }, {
-  pattern = { "*.hl", "hypr*.conf" },
-  callback = function(event)
-    print(string.format("starting hyprls for %s", vim.inspect(event)))
-    vim.lsp.start({
-      name = "hyprlang",
-      cmd = { "hyprls" },
-      root_dir = vim.fn.getcwd(),
-    })
-  end,
-})
-
--- Markdown
--- createCmd("BufWritePost", {
---   pattern = { "*.md", "*.markdown" },
---   group = markdownGroup,
---   callback = function(_)
---     -- local cursor = vim.fn.getpos(".")
---     vim.cmd("FormatWrite")
---     -- vim.fn.setpos(".", cursor)
---   end,
--- })
-
--- Set neomutt compose email file types to markdown.
-vim.api.nvim_create_autocmd("BufRead", {
-  pattern = "neomutt*",
-  callback = function()
-    vim.cmd.setlocal("filetype=markdown")
-    vim.cmd.setlocal("textwidth=120")
-    vim.cmd.setlocal("spell spelllang=en_us")
-  end
-})
-
--- Go
-createCmd("BufWritePre", {
-  pattern = "*.go",
-  callback = function()
-    require("go.format").goimport()
-  end,
-  group = vim.api.nvim_create_augroup("GoFormat", defaultGroupOptions),
-})
-
--- GoPass
-vim.api.nvim_exec2(
-  [[
-  autocmd BufNewFile,BufRead /private/**/gopass** setlocal noswapfile nobackup noundofile shada=""
-  ]],
-  {}
-)
-
--- Highlight when yanking.
-createCmd("TextYankPost", {
-  desc = "Highlight when yanking text.",
-  group = vim.api.nvim_create_augroup("highlight-yank", { clear = true }),
-  callback = function()
-    vim.highlight.on_yank()
-  end,
-})
-
--- Force zsh scripts to use bash syntax hyighlighting.
-vim.api.nvim_create_autocmd({ "BufRead", "BufNewFile" }, {
-  pattern = "*",
-  callback = function(args)
-    local first_line = vim.api.nvim_buf_get_lines(args.buf, 0, 1, false)[1] or ""
-    if first_line:match("^#!.*zsh") then
-      vim.bo[args.buf].filetype = "bash"
-    end
-  end,
-})

env/.config/nvim/lua/config/keymaps.lua

@@ -1,54 +0,0 @@
--- Keymaps are automatically loaded on the VeryLazy event
--- Default keymaps that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/keymaps.lua
--- Add any additional keymaps here
-
-local keymap = vim.keymap.set
-local default_options = { noremap = true, silent = true }
-local wk = require("which-key")
-
-local wk_add = function(mode, keymaps)
-  wk.add(keymaps, { mode = mode, silent = true })
-end
-
-keymap("i", "jk", "<ESC>", default_options)
-
-local make_executable = function()
-  local file = vim.fn.expand("%:p")
-  vim.cmd("silent !chmod +x " .. file)
-  print("Made " .. file .. " executable")
-end
-
---------------------------------------------------------------------------------
--- Normal Mode
---------------------------------------------------------------------------------
-wk_add("n", {
-  { "<Left>", ":vertical resize +1<CR>", desc = "Resize Pane Left" },
-  { "<Right>", ":vertical resize -1<CR>", desc = "Resize Pane Right" },
-  { "<Up>", "resize -1<CR>", desc = "Resize Pane Up" },
-  { "<Down>", "resize +1<CR>", desc = "Resize Pane Down" },
-
-  { "<leader>n", "<CMD>:noh<CR>", desc = "[N]o highlighting" },
-  { "<leader>s", "<CMD>:set spell!<CR>", desc = "[S]pell check toggle" },
-  { "<C-s>", "<CMD>:write<CR>", desc = "[S]ave" },
-
-  { "J", ":move .+1<CR>==", desc = "Move line down" },
-  { "K", ":move .-2<CR>==", desc = "Move line up" },
-
-  { "<leader>x", make_executable, desc = "Make current file e[x]ecutable" },
-  { "<leader>z", "<CMD>:ZenMode<CR>", desc = "[Z]en Mode" },
-})
-
---------------------------------------------------------------------------------
--- Visual Mode
---------------------------------------------------------------------------------
-
-vim.keymap.set("v", "K", ":move '<-2<CR>gv=gv", { desc = "Move selected block up.", silent = true, noremap = true })
-vim.keymap.set("v", "J", ":move '>+1<CR>gv=gv", { desc = "Move selected block up.", silent = true, noremap = true })
-
--- Toggle term key maps, that get attached when terminal is opened.
-function _G.set_terminal_keymaps()
-  local opts = { buffer = 0 }
-  keymap("t", "<esc>", [[<C-\><C-n>]], opts)
-end
-
-vim.cmd("autocmd! TermOpen term://* lua set_terminal_keymaps()")

env/.config/nvim/lua/config/lazy.lua

@@ -1,69 +0,0 @@
-local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
-if not (vim.uv or vim.loop).fs_stat(lazypath) then
-  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
-  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
-  if vim.v.shell_error ~= 0 then
-    vim.api.nvim_echo({
-      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
-      { out,                            "WarningMsg" },
-      { "\nPress any key to exit..." },
-    }, true, {})
-    vim.fn.getchar()
-    os.exit(1)
-  end
-end
-vim.opt.rtp:prepend(lazypath)
-
-require("lazy").setup({
-  spec = {
-    -- add LazyVim and import its plugins
-    { "LazyVim/LazyVim", import = "lazyvim.plugins" },
-    {
-      import = "lazyvim.plugins.extras.editor.mini-files",
-      opts = {
-        options = {
-          use_as_default_explorer = true,
-        },
-      },
-    },
-    {
-      import = "lazyvim.plugins.extras.coding.blink",
-      keymap = {
-        preset = "enter",
-        ["<C-y>"] = { "select_and_accept" },
-      },
-    },
-
-    -- import/override with your plugins
-    { import = "plugins" },
-  },
-  defaults = {
-    -- By default, only LazyVim plugins will be lazy-loaded. Your custom plugins will load during startup.
-    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
-    lazy = false,
-    -- It's recommended to leave version=false for now, since a lot the plugin that support versioning,
-    -- have outdated releases, which may break your Neovim install.
-    version = false, -- always use the latest git commit
-    -- version = "*", -- try installing the latest stable version for plugins that support semver
-  },
-  install = { colorscheme = { "tokyonight", "habamax" } },
-  checker = {
-    enabled = true, -- check for plugin updates periodically
-    notify = false, -- notify on update
-  },                -- automatically check for plugin updates
-  performance = {
-    rtp = {
-      -- disable some rtp plugins
-      disabled_plugins = {
-        "gzip",
-        -- "matchit",
-        -- "matchparen",
-        -- "netrwPlugin",
-        "tarPlugin",
-        "tohtml",
-        "tutor",
-        "zipPlugin",
-      },
-    },
-  },
-})

env/.config/nvim/lua/config/options.lua

@@ -1,72 +0,0 @@
--- Options are automatically loaded before lazy.nvim startup
--- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
--- Add any additional options here
---
-local o = vim.opt
-local wo = vim.wo
-local fn = vim.fn
-
-vim.cmd.set("inccommand=split")
-o.filetype = "on"
-o.updatetime = 500 -- faster completion
-o.timeoutlen = 800 -- time to wait for a mapped sequence to complete (in milliseconds)
-o.ttimeoutlen = 300 -- Time in milliseconds to wait for a key code sequence to complete
-o.backup = false -- creates a backup file
-o.swapfile = false -- enable/disable swap file creation
-o.dir = fn.stdpath("data") .. "/swp" -- swap file directory
-o.undofile = false -- enable/disable undo file creation
-o.undodir = fn.stdpath("data") .. "/undodir" -- set undo directory
-o.history = 500 -- Use the 'history' option to set the number of lines from command mode that are remembered.
-o.hidden = true -- required to keep multiple buffers and open multiple buffers
---o.clipboard = "unnamedplus" -- allows neovim to access the system clipboard
-o.fileencoding = "utf-8" -- the encoding written to a file
-o.conceallevel = 0 -- so that `` is visible in markdown files
-o.number = true -- set numbered lines
-o.relativenumber = true -- set relative numbered lines
-o.cmdheight = 1 -- space for displaying messages/commands
-o.showmode = false -- we don't need to see things like -- INSERT -- anymore
-o.showtabline = 2 -- always show tabs
-o.laststatus = 2 --  The value of this option influences when the last window will have a status line (2 always)
-o.smartcase = true -- smart case
-o.smartindent = true -- make indenting smarter again
-o.splitbelow = true -- force all horizontal splits to go below current window
-o.splitright = true -- force all vertical splits to go to the right of current window
-o.autoindent = true -- turn on auto indent.
-o.expandtab = true -- convert tabs to spaces
-o.smarttab = true -- turn on smart tab
-o.shiftwidth = 2 -- the number of spaces inserted for each indentation
-o.tabstop = 2 -- how many columns a tab counts for
-o.termguicolors = true -- set term gui colors (most terminals support this)
-o.cursorline = true -- highlight the current line
-o.scrolloff = 20 -- Minimal number of screen lines to keep above and below the cursor
-o.sidescrolloff = 5 -- The minimal number of columns to scroll horizontally
-o.hlsearch = false -- highlight all matches on previous search pattern
-o.ignorecase = true -- ignore case in search patterns
-o.foldenable = false -- disable folding; enable with zi
-o.foldmethod = "expr"
-o.foldexpr = "nvim_treesitter#foldexpr()"
-vim.cmd.set("nolist") -- don't show listchars.
--- o.listchars = "eol:¬,tab:>·,trail:~,extends:>,precedes:<"
-o.listchars = "eol:¬,tab:>·,trail:~,extends:>,precedes:<,space:␣"
-o.shortmess = o.shortmess + "c" -- prevent "pattern not found" messages
-wo.colorcolumn = "99999"
-o.wildmode = "full"
-o.lazyredraw = false -- do not redraw screen while running macros
-o.grepprg = "rg --hidden --vimgrep --smart-case --"
-o.completeopt = { "menu", "menuone", "noselect", "noinsert" } -- A comma separated list of options for Insert mode completion
-o.wildignorecase = true -- When set case is ignored when completing file names and directories
-o.wildignore = [[
-.git,.hg,.svn
-*.aux,*.out,*.toc
-*.o,*.obj,*.exe,*.dll,*.manifest,*.rbc,*.class
-*.ai,*.bmp,*.gif,*.ico,*.jpg,*.jpeg,*.png,*.psd,*.webp
-*.avi,*.divx,*.mp4,*.webm,*.mov,*.m2ts,*.mkv,*.vob,*.mpg,*.mpeg
-*.mp3,*.oga,*.ogg,*.wav,*.flac
-*.eot,*.otf,*.ttf,*.woff
-*.doc,*.pdf,*.cbr,*.cbz
-*.zip,*.tar.gz,*.tar.bz2,*.rar,*.tar.xz,*.kgb
-*.swp,.lock,.DS_Store,._*
-*/tmp/*,*.so,*.swp,*.zip,**/node_modules/**,**/target/**,**.terraform/**"
-]]
-o.viminfo = "" -- disable viminfo from copying information from current session, for security.
-vim.g.snacks_animate = false

env/.config/nvim/lua/plugins/cmp.lua

@@ -1,8 +0,0 @@
-return {
-  "saghen/blink.cmp",
-  opts = {
-    keymap = {
-      preset = "default"
-    }
-  }
-}

env/.config/nvim/lua/plugins/colorscheme.lua

@@ -1,9 +0,0 @@
-return {
-  { "catppuccin/nvim", name = "catppuccin", priority = 1000 },
-  {
-    "LazyVim/LazyVim",
-    opts = {
-      colorscheme = "catppuccin",
-    },
-  },
-}

env/.config/nvim/lua/plugins/disabled.lua

@@ -1,4 +0,0 @@
-return {
-  { "nvim-neo-tree/neo-tree.nvim", enabled = false },
-  { "akinsho/bufferline.nvim",     enabled = false },
-}

env/.config/nvim/lua/plugins/fidget.lua

@@ -1,23 +0,0 @@
-return {
-  "j-hui/fidget.nvim",
-  event = "VeryLazy",
-  config = function()
-    local fidget = require("fidget")
-    fidget.setup({
-      notification = {
-        window = {
-          normal_hl = "String", -- Base highlight group in the notification window
-          winblend = 0, -- Background color opacity in the notification window
-          border = "rounded", -- Border around the notification window
-          zindex = 45, -- Stacking priority of the notification window
-          max_width = 0, -- Maximum width of the notification window
-          max_height = 0, -- Maximum height of the notification window
-          x_padding = 1, -- Padding from right edge of window boundary
-          y_padding = 1, -- Padding from bottom edge of window boundary
-          align = "bottom", -- How to align the notification window
-          relative = "editor", -- What the notification window position is relative to
-        },
-      },
-    })
-  end,
-}

env/.config/nvim/lua/plugins/formatter.lua

@@ -1,30 +0,0 @@
-return {
-  "stevearc/conform.nvim",
-  opts = {
-    formatters = {
-      ["markdown-toc"] = {
-        condition = function(_, ctx)
-          for _, line in ipairs(vim.api.nvim_buf_get_lines(ctx.buf, 0, -1, false)) do
-            if line:find("<!%-%- toc %-%->") then
-              return true
-            end
-          end
-        end,
-      },
-      ["markdownlint-cli2"] = {
-        condition = function(_, ctx)
-          local diag = vim.tbl_filter(function(d)
-            return d.source == "markdownlint"
-          end, vim.diagnostic.get(ctx.buf))
-          return #diag > 0
-        end,
-      },
-    },
-    formatters_by_ft = {
-      ["markdown"] = { "prettier", "markdownlint-cli2", "markdown-toc" },
-      ["markdown.mdx"] = { "prettier", "markdownlint-cli2", "markdown-toc" },
-      lua = { "stulua" },
-      swift = { "swiftformat" },
-    },
-  },
-}

env/.config/nvim/lua/plugins/harpoon.lua

@@ -1,78 +0,0 @@
-return {
-  {
-    "ThePrimeagen/harpoon",
-    branch = "harpoon2",
-    opts = {
-      settings = {
-        save_on_toggle = true,
-        sync_on_ui_close = true,
-      },
-    },
-    keys = {
-      {
-        "<C-e>",
-        function()
-          require("harpoon").ui:toggle_quick_menu(require("harpoon"):list())
-        end,
-        desc = "Open Harpoon window.",
-      },
-      {
-        "<leader>a",
-        function()
-          require("harpoon"):list():add()
-        end,
-        desc = "[A]dd to the harpoon list.",
-      },
-      {
-        "<A-y>",
-        function()
-          require("harpoon"):list():select(1)
-        end,
-        desc = "Select first harpoon buffer.",
-      },
-      {
-        "<A-u>",
-        function()
-          require("harpoon"):list():select(2)
-        end,
-        desc = "Select second harpoon buffer.",
-      },
-      {
-        "<A-i>",
-        function()
-          require("harpoon"):list():select(3)
-        end,
-        desc = "Select third harpoon buffer.",
-      },
-      {
-        "<A-o>",
-        function()
-          require("harpoon"):list():select(4)
-        end,
-        desc = "Select fourth harpoon buffer.",
-      },
-      {
-        "<C-[>",
-        function()
-          require("harpoon"):list():prev()
-        end,
-        desc = "Previous harpoon buffer.",
-      },
-      {
-        "<C-]>",
-        function()
-          require("harpoon"):list():next()
-        end,
-        desc = "Next harpoon buffer.",
-      },
-      -- Extensions
-      require("harpoon"):extend({
-        UI_CREATE = function(cx)
-          vim.keymap.set("n", "<C-v>", function()
-            require("harpoon").ui:select_menu_item({ vsplit = true })
-          end, { buffer = cx.buffer, desc = "Open in [V]split" })
-        end,
-      }),
-    },
-  },
-}

env/.config/nvim/lua/plugins/init.lua

@@ -1,29 +0,0 @@
--- Plugins that don't require much configuration are in here.
---
-return {
-  {
-    "folke/snacks.nvim",
-    opts = {
-      indent = { enabled = false },
-    },
-  },
-  {
-    "christoomey/vim-tmux-navigator",
-    lazy = false,
-    cmd = {
-      "TmuxNavigateLeft",
-      "TmuxNavigateDown",
-      "TmuxNavigateUp",
-      "TmuxNavigateRight",
-      "TmuxNavigatePrevious",
-      "TmuxNavigatorProcessList",
-    },
-    keys = {
-      { "<c-h>", "<cmd><C-U>TmuxNavigateLeft<cr>" },
-      { "<c-j>", "<cmd><C-U>TmuxNavigateDown<cr>" },
-      { "<c-k>", "<cmd><C-U>TmuxNavigateUp<cr>" },
-      { "<c-l>", "<cmd><C-U>TmuxNavigateRight<cr>" },
-      { "<c-\\>", "<cmd><C-U>TmuxNavigatePrevious<cr>" },
-    },
-  },
-}

env/.config/nvim/lua/plugins/lint.lua

@@ -1,12 +0,0 @@
-return {
-  {
-    "mfussenegger/nvim-lint",
-    opts = {
-      linters = {
-        markdownlint = {
-          args = { "--config", "~/.markdownlint.jsonc", "--" },
-        },
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/lsp.lua

@@ -1,169 +0,0 @@
-return {
-  {
-    "mason-org/mason.nvim",
-    dependencies = {
-      "neovim/nvim-lspconfig",
-    },
-    opts = {
-      ensure_installed = {
-        "clangd",
-        "marksman",
-        "shfmt",
-        "tinymist",
-      },
-    },
-  },
-  {
-    "nvim-treesitter/nvim-treesitter",
-    opts = {
-      ensure_installed = {
-        "bash",
-        "cmake",
-        "dockerfile",
-        "editorconfig",
-        "ini",
-        "jq",
-        "latex",
-        "make",
-      },
-    },
-  },
-  {
-    "neovim/nvim-lspconfig",
-    event = { "BufReadPre", "BufNewFile" },
-    opts = {
-      servers = {
-        bashls = {},
-        clangd = {},
-        dockerls = {},
-        gopls = {},
-        harper_ls = {},
-        jsonls = {},
-        lua_ls = {
-          settings = {
-            Lua = {
-              runtime = {
-                version = "LuaJIT",
-              },
-              diagnostics = {
-                globals = { "vim" },
-              },
-              workspace = {
-                library = vim.api.nvim_get_runtime_file("", true),
-              },
-              telemetry = {
-                enable = false,
-              },
-            },
-          },
-        },
-        marksman = {},
-        sourcekit = {},
-        tinymist = {
-          settings = {
-            formatterMode = "typstyle",
-          },
-        },
-        yamlls = {},
-      },
-      setup = {
-        clangd = function(_, opts)
-          opts.capabilities.offsetEncoding = { "utf-16" }
-        end,
-        sourcekit = function(_, opts)
-          opts.cmd = {
-            vim.trim(vim.fn.system("xcrun -f sourcekit-lsp")) or nil,
-          }
-        end,
-      },
-    },
-  },
-}
-
--- return {
---   "neovim/nvim-lspconfig",
---   event = { "BufReadPre", "BufNewFile" },
---   dependencies = {
---     "hrsh7th/cmp-nvim-lsp",
---     { "antosha417/nvim-lsp-file-operations", config = true },
---     "williamboman/mason.nvim",
---     "williamboman/mason-lspconfig.nvim",
---     {
---       "folke/lazydev.nvim",
---       ft = "lua",
---       opts = {
---         library = {
---           { path = "${3rd}/luv/library", words = { "vim%.uv" } },
---         },
---       },
---     },
---   },
---   config = function()
---     require("mason").setup()
---     require("mason-lspconfig").setup({
---       opts = {
---         ensure_installed = lsp_servers,
---       },
---     })
---     local lspconfig = require("lspconfig")
---     local cmp_nvim_lsp = require("cmp_nvim_lsp")
---     local capabilities = cmp_nvim_lsp.default_capabilities()
---     local opts = { noremap = true, silent = true }
---     local on_attach = function(_, bufnr)
---       opts.buffer = bufnr
---
---       opts.desc = "Show line diagnostics"
---       vim.keymap.set("n", "<leader>d", vim.diagnostic.open_float, opts)
---
---       opts.desc = "Show diagnostics in Telescope"
---       vim.keymap.set("n", "<leader><leader>d", "<CMD>Telescope diagnostics bufnr=0<CR>", opts)
---
---       opts.desc = "Show documentation for what is under cursor"
---       vim.keymap.set("n", "<C-k>", vim.lsp.buf.hover, opts)
---
---       opts.desc = "[G]oto [D]efinition"
---       vim.keymap.set("n", "gd", "<cmd>Telescope lsp_definitions trim_text=true<cr>", opts)
---
---       opts.desc = "[G]oto [D]eclaration"
---       vim.keymap.set("n", "gD", vim.lsp.buf.declaration, opts)
---
---       opts.desc = "LSP [C]ode [A]ction"
---       vim.keymap.set("n", "<leader>ca", vim.lsp.buf.code_action, opts)
---
---       --opts.desc = "[R]e-[N]ame"
---       --vim.keymap.set("n", "<leader>rn", vim.lsp.buf.rename, opts)
---
---       opts.desc = "[R]eload or start LSP"
---       vim.keymap.set("n", "<leader>rl", ":LspRestart | :LspStart<CR>", opts)
---
---       opts.desc = "Goto previous diagnostic"
---       vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, opts)
---
---       opts.desc = "Goto next diagnostic"
---       vim.keymap.set("n", "]d", vim.diagnostic.goto_next, opts)
---     end
---
---     for _, lsp in ipairs(lsp_servers) do
---       lspconfig[lsp].setup({
---         capabilities = capabilities,
---         on_attach = on_attach,
---         on_init = function(client)
---           -- HACK: to fix some issues with LSP
---           -- more details: https://github.com/neovim/neovim/issues/19237#issuecomment-2237037154
---           client.offset_encoding = "utf-8"
---         end,
---         cmd = lsp == "sourcekit" and { vim.trim(vim.fn.system("xcrun -f sourcekit-lsp")) } or nil,
---       })
---     end
---
---     -- nice icons
---     local signs = { Error = " ", Warn = " ", Hint = "󰠠 ", Info = " " }
---     for type, icon in pairs(signs) do
---       local hl = "DiagnosticSign" .. type
---       vim.fn.sign_define(hl, { text = icon, texthl = hl, numhl = "" })
---     end
---
---     -- For some reason I was having trouble getting this to work inside the on-attach, so it's here.
---     vim.keymap.set("n", "<leader>rn", vim.lsp.buf.rename, { desc = "[R]e-[N]ame" })
---   end,
--- }

env/.config/nvim/lua/plugins/luasnip.lua

@@ -1,39 +0,0 @@
-return {
-  {
-    "L3MON4D3/LuaSnip",
-    opts = function()
-      LazyVim.cmp.actions.snippet_forward = function()
-        if require("luasnip").jumpable(1) then
-          require("luasnip").jump(1)
-          return true
-        end
-      end
-      LazyVim.cmp.actions.snippet_stop = function()
-        if require("luasnip").expand_or_jumpable() then -- or just jumpable(1) is fine?
-          require("luasnip").unlink_current()
-          return true
-        end
-      end
-    end,
-    keys = {
-      {
-        "<C-k>",
-        mode = { "i", "s" },
-        function()
-          if ls.expand_or_jumpable() then
-            ls.expand_or_jump()
-          end
-        end
-      },
-      {
-        "<C-j>",
-        mode = { "i", "s" },
-        function()
-          if ls.jumpable(-1) then
-            ls.jump(-1)
-          end
-        end
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/oil.lua

@@ -1,40 +0,0 @@
-return {
-  "stevearc/oil.nvim",
-  event = "VeryLazy",
-  dependencies = {
-    "nvim-tree/nvim-web-devicons",
-  },
-  opts = {
-    columns = { "icon" },
-    keymaps = {
-      ["<C-h>"] = false,
-      ["<M-h>"] = "actions.select_split",
-      ["<C-v>"] = {
-        "actions.select",
-        opts = { vertical = true },
-        desc = "Open the entry in a vertical split",
-      },
-      view_options = {
-        show_hidden = true,
-        is_hidden_file = function(name, _) -- second arg is bufnr, but not currently used.
-          -- Don't show .DS_Store in output.
-          -- local is_ds_store = name ~= ".DS_Store"
-          -- return not is_ds_store
-          return false
-        end,
-      },
-    },
-  },
-  keys = {
-    -- Show the parent directory in current window.
-    { "-", "<CMD>Oil<CR>", desc = "Open parent directory." },
-    -- Open parent directory in floating window.
-    {
-      "<space>-",
-      function()
-        require("oil").toggle_float()
-      end,
-      desc = "Open parent directory in floating window.",
-    },
-  },
-}

env/.config/nvim/lua/plugins/snacks.lua

@@ -1,47 +0,0 @@
--- NOTE: Header looks jacked up here, but fine when rendered in the ui.
-return {
-  "folke/snacks.nvim",
-  opts = {
-    picker = {
-      hidden = true,
-      ignored = true
-    },
-    image = {
-      doc = {
-        enabled = true,
-      },
-    },
-    dashboard = {
-      row = nil,
-      col = nil,
-      preset = {
-        header = [[
-        *
-       +++++
-      +++++++++
-     ==+++++++++++
-    +===:+++++++++++*
-          +======--+++++++++++*##+====
-        +==========:=+++++++++++#+====
-       +=============-=++++++++++++====
-       +================-:+++++++++++++==
-      +===================--++++++++++++++*
-     +======================--+++++++++++++++*
-    =========================-++++++++++++++++
-    ==========================:+++++++++++++++
-    ===========================:++++++++++++++
-    ===========================-.-++++++++++++
-    ===========================-::.=++++++++++
-    ===========================----..=++++++++
-    ===========================------..:=+++++
-    ===========================--------:...-++
-    ===========================------------:.:
-    ===========================---------------
-    ===========================---------------
-    ===========================---------------
-]],
-      },
-
-    },
-  },
-}

env/.config/nvim/lua/plugins/telescope.lua

@@ -1,11 +0,0 @@
-return {
-  {
-    import = "lazyvim.plugins.extras.editor.telescope",
-    enabled = false,
-    opts = {
-      ensure_installed = {
-        "swift",
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/todo-comment.lua

@@ -1,14 +0,0 @@
-return {
-  "folke/todo-comments.nvim",
-  dependencies = {
-    "nvim-lua/plenary.nvim",
-    "folke/trouble.nvim",
-  },
-  keys = {
-    { "<leader>xt", false },
-    { "<leader>xT", false },
-    { "<leader>tq", "<CMD>Trouble todo toggle<CR>", desc = "[T]odo [Q]uick fix list." },
-    { "<leader><leader>t", "<CMD>TodoTelescope<CR>", desc = "[T]odo telescope list." },
-    { "<leader>tl", "<CMD>TodoLocList<CR>", desc = "[T]odo [L]ocation list." },
-  },
-}

env/.config/nvim/lua/plugins/typst-preview.lua

@@ -1,15 +0,0 @@
-return {
-  'chomosuke/typst-preview.nvim',
-  ft = 'typst', -- or ft = 'typst'
-  version = '1.*',
-  opts = {
-    debug = true,
-  }, -- lazy.nvim will implicitly calls `setup {}`
-  keys = {
-    {
-      "<leader>tp",
-      "<CMD>TypstPreviewToggle<CR>",
-      desc = "Toggle typst preview."
-    },
-  }
-}

env/.config/nvim/lua/plugins/xcodebuild.lua

@@ -1,73 +0,0 @@
-local progress_handle
-
-return {
-  "wojciech-kulik/xcodebuild.nvim",
-  event = "VeryLazy",
-  dependencies = {
-    "nvim-telescope/telescope.nvim",
-    "MunifTanjim/nui.nvim",
-  },
-  opts = {
-    show_build_progress_bar = false,
-    logs = {
-      auto_open_on_success_tests = false,
-      auto_open_on_failed_tests = false,
-      auto_open_on_success_build = false,
-      auto_open_on_failed_build = false,
-      auto_focus = false,
-      auto_close_on_app_launch = true,
-      only_summary = true,
-      notify = function(message, severity)
-        local fidget = require("fidget")
-        if progress_handle then
-          progress_handle.message = message
-          if not message:find("Loading") then
-            progress_handle:finish()
-            progress_handle = nil
-            if vim.trim(message) ~= "" then
-              fidget.notify(message, severity)
-            end
-          end
-        else
-          fidget.notify(message, severity)
-        end
-      end,
-      notify_progress = function(message)
-        local progress = require("fidget.progress")
-
-        if progress_handle then
-          progress_handle.title = ""
-          progress_handle.message = message
-        else
-          progress_handle = progress.handle.create({
-            message = message,
-            lsp_client = { name = "xcodebuild.nvim" },
-          })
-        end
-      end,
-    },
-    code_coverage = {
-      enabled = true,
-    },
-  },
-  keys = {
-    { "<leader>X",  "<cmd>XcodebuildPicker<cr>",                 desc = "Show Xcodebuild Actions" },
-    { "<leader>xf", "<cmd>XcodebuildProjectManager<cr>",         desc = "Show Project Manager Actions" },
-    { "<leader>xb", "<cmd>XcodebuildBuild<cr>",                  desc = "Build Project" },
-    { "<leader>xB", "<cmd>XcodebuildBuildForTesting<cr>",        desc = "Build For Testing" },
-    { "<leader>xr", "<cmd>XcodebuildBuildRun<cr>",               desc = "Build & Run Project" },
-    { "<leader>xt", "<cmd>XcodebuildTest<cr>",                   desc = "Run Tests" },
-    { "<leader>xt", "<cmd>XcodebuildTestSelected<cr>",           desc = "Run Selected Tests" },
-    { "<leader>xT", "<cmd>XcodebuildTestClass<cr>",              desc = "Run This Test Class" },
-    { "<leader>xl", "<cmd>XcodebuildToggleLogs<cr>",             desc = "Toggle Xcodebuild Logs" },
-    { "<leader>xc", "<cmd>XcodebuildToggleCodeCoverage<cr>",     desc = "Toggle Code Coverage" },
-    { "<leader>xC", "<cmd>XcodebuildShowCodeCoverageReport<cr>", desc = "Show Code Coverage Report" },
-    { "<leader>xe", "<cmd>XcodebuildTestExplorerToggle<cr>",     desc = "Toggle Test Explorer" },
-    { "<leader>xs", "<cmd>XcodebuildFailingSnapshots<cr>",       desc = "Show Failing Snapshots" },
-    { "<leader>xd", "<cmd>XcodebuildSelectDevice<cr>",           desc = "Select Device" },
-    { "<leader>xp", "<cmd>XcodebuildSelectTestPlan<cr>",         desc = "Select Test Plan" },
-    { "<leader>xq", "<cmd>Telescope quickfix<cr",                desc = "Show QuickFix List" },
-    { "<leader>xx", "<cmd>XcodebuildQuickfixLine<cr>",           desc = "Quickfix Line" },
-    { "<leader>xa", "<cmd>XcodebuildCodeActions<cr>",            desc = "Show Code Actions" },
-  },
-}

env/.config/nvim/snippets/init.lua

@@ -1,17 +0,0 @@
--- Setup snippets here.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-
-ls.add_snippets("lua", {
-	s("hello", {
-		t('print("hello '),
-		i(1),
-		t(' world")'),
-	}),
-})

env/.config/nvim/snippets/lua.lua

@@ -1,41 +0,0 @@
--- Setup snippets here.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-local fmt = require("luasnip.extras.fmt").fmt
-
-ls.add_snippets("lua", {
-  -- Setup a new snippet file.
-  s("sf", {
-    t({
-      "-- Setup snippets.",
-      'local ls = require("luasnip")',
-      "local s = ls.snippet",
-      "local sn = ls.snippet_node",
-      "local ms = ls.multi_snippet",
-      "local i = ls.insert_node",
-      "local f = ls.function_node",
-      "local c = ls.choice_node",
-      "local t = ls.text_node",
-      "-- Add snippets",
-    }),
-    t('ls.add_snippets("'),
-    i(1, "<file-type>"),
-    t({
-      '", {',
-      "\t-- Define snippets here.",
-      "})",
-    }),
-  }),
-  s("c", {
-    c(1, {
-      fmt("{}", { i(1), t("debug") }),
-      fmt("{}", { i(1), t("warning") }),
-    }),
-  }),
-})

env/.config/nvim/snippets/swift.lua

@@ -1,131 +0,0 @@
--- Setup snippets.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-local fmt = require("luasnip.extras.fmt").fmt
-local rep = require("luasnip.extras").rep
--- Add snippets
-ls.add_snippets("swift", {
-	-- Add a dependency snippet.
-	s({ trig = "@d", desc = "Add a dependency." }, fmt("@Dependency(\\.{}) var {}", { i(1), rep(1) })),
-
-	-- Add a dependency client.
-	s(
-		{
-			trig = "@dc",
-			desc = "Add a dependency client.",
-		},
-		fmt(
-			[[
-		public extension DependencyValues {{
-			var {}: {} {{
-				get {{ self[{}.self] }}
-				set {{ self[{}.self] = newValue }}
-			}}
-		}}
-
-		@DependencyClient
-		public struct {} {{
-
-			// Insert interface here.
-			{}
-		}}
-
-		extension {}: TestDependencyKey {{
-			public static let testValue: {} = Self()
-		}}
-
-	]],
-			{
-				i(1, "<name>"),
-				i(2, "<Dependency>"),
-				rep(2),
-				rep(2),
-				rep(2),
-				i(0),
-				rep(2),
-				rep(2),
-			}
-		)
-	),
-
-	s(
-		{ trig = "str", desc = "Add a struct" },
-		fmt(
-			[[
-	struct {}: {} {{
-		{}
-	}}
-	]],
-			{ i(1, "<Name>"), i(2, "<Protocols>"), i(0) }
-		)
-	),
-
-	-- Decorate a type or function with an @_spi(...)
-	s({ trig = "@_s", desc = "Add spi modifier." }, fmt("@_spi({})", { i(1, "name") })),
-
-	-- Add an @_spi(...) import ...
-	s(
-		{ trig = "@_si", desc = "Import with spi." },
-		fmt(
-			[[
-		@_spi({}) import {}
-		{}
-		]],
-			{ i(1, "name"), i(2, "module"), i(0) }
-		)
-	),
-
-	-- Document a function
-	-- TODO: add dynamic number of prameters.
-	s(
-		{ trig = "docf", desc = "Document a function." },
-		fmt(
-			[[
-		/// {}
-		///
-		/// - Parameters:
-		///		- {}: {}
-		]],
-			{ i(1, "A short description."), i(2, "<param>"), i(3, "Describe the parameter.") }
-		)
-	),
-
-	-- Add a parameter to a documentation string.
-	s(
-		{ trig = "param", desc = "Add a parameter to documentation" },
-		fmt(
-			[[
-		///		- {}: {}
-	]],
-			{ i(1, "<param>"), i(2, "<description>") }
-		)
-	),
-
-	-- Add a withDependencies
-	s(
-		{ trig = "wd", desc = "withDependencies" },
-		fmt(
-			[[
-			withDependencies {{
-				$0.{} = {}
-			}} operation: {{
-				@Dependency(\.{}) var {}
-				{}
-			}}
-	]],
-			{
-				i(1, "<dependency>"),
-				i(2, "<override>"),
-				rep(1),
-				rep(1),
-				i(0),
-			}
-		)
-	),
-})

env/.config/nvim/spell/en.utf-8.add

@@ -1,21 +0,0 @@
-MeasureQuick
-Housh
-sealtite
-Subcool
-OEM
-NEC
-AHJ
-CFM
-Hydronic
-subpar
-quo
-IAQ
-wc
-HVAC
-dehumidification
-ansible
-orchestrator
-ethernet
-unifi
-wildcard
-Housh

env/.config/nvim/stylua.toml

@@ -1,3 +0,0 @@
-indent_type = "Spaces"
-indent_width = 2
-column_width = 120

env/.config/ripgrep/ripgreprc

@@ -0,0 +1,7 @@
+# Show hidden files
+--hidden
+# Ignore '.git' directory
+--glob=!.git/*
+--no-follow
+--color=never
+

env/.config/systemd/user/tmux-kill-sessions.service

@@ -0,0 +1,7 @@
+[Unit]
+Description=Tmux kill sessions service
+After=graphical-session.target
+
+[Service]
+Type=oneshot
+ExecStart=%h/.local/scripts/tmux-kill-old-sessions

env/.config/systemd/user/tmux-kill-sessions.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Tmux kill sessions timer
+Requires=tmux-kill-sessions.service
+
+[Timer]
+OnBootSec=2h
+OnUnitActiveSec=2h
+AccuracySec=10sec
+
+[Install]
+WantedBy=timers.target

env/.config/walker/config.toml

@@ -1,138 +0,0 @@
-force_keyboard_focus = true     # forces keyboard forcus to stay in Walker
-close_when_open = true          # close walker when invoking while already opened
-selection_wrap = false          # wrap list if at bottom or top
-global_argument_delimiter = "#" # query: firefox#https://benz.dev => part after delimiter will be ignored when querying. this should be the same as in the elephant config
-keep_open_modifier = "shift"    # won't close on activation, but rather select the next item in the list
-exact_search_prefix = "'"       # disable fuzzy searching
-theme = "default"               # theme to use
-disable_mouse = false           # disable mouse (on input and list only)
-
-[shell]
-anchor_top = true
-anchor_bottom = true
-anchor_left = true
-anchor_right = true
-
-[placeholders]
-"default" = { input = "Search", list = "No Results" } # placeholders for input and empty list, key is the providers name, so f.e. "desktopapplications" or "menus:other"
-
-# [keybinds]
-# close = "Escape"
-# next = "Down"
-# previous = "Up"
-# toggle_exact = "ctrl e"
-# resume_last_query = "ctrl r"
-# quick_activate = ["F1", "F2", "F3", "F4"]
-
-[providers]
-default = [
-  "desktopapplications",
-  "calc",
-  "runner",
-  "menus",
-  "websearch",
-] # providers to be queried by default
-empty = ["desktopapplications"] # providers to be queried when query is empty
-
-[[providers.prefixes]]
-prefix = ";"
-provider = "providerlist"
-
-[[providers.prefixes]]
-prefix = "/"
-provider = "files"
-
-[[providers.prefixes]]
-prefix = "."
-provider = "symbols"
-
-[[providers.prefixes]]
-prefix = "!"
-provider = "todo"
-
-[[providers.prefixes]]
-prefix = "="
-provider = "calc"
-
-[[providers.prefixes]]
-prefix = "@"
-provider = "websearch"
-
-[[providers.prefixes]]
-prefix = ":"
-provider = "clipboard"
-
-[providers.archlinuxpkgs]
-default = "install"
-install = "Return"
-remove = "ctrl d"
-
-[providers.calc]
-default = "copy"
-copy = "Return"
-save = "ctrl s"
-delete = "ctrl d"
-
-[providers.websearch]
-default = "search"
-search = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.providerlist]
-default = "activate"
-activate = "Return"
-
-[providers.clipboard]
-time_format = "%d.%m. - %H:%M" # format for the clipboard item date
-default = "copy"
-copy = "Return"
-delete = "ctrl d"
-edit = "ctrl o"
-toggle_images_only = "ctrl i"
-
-[providers.desktopapplications]
-default = "start"
-start = "Return"
-start_keep_open = "shift Return"
-remove_history = "ctrl BackSpace"
-toggle_pin = "ctrl p"
-
-[providers.files]
-default = "open"
-open = "Return"
-open_dir = "ctrl Return"
-copy_path = "ctrl shift c"
-copy_file = "ctrl c"
-
-[providers.todo]
-default = "save"
-save = "Return"
-delete = "ctrl d"
-mark_active = "ctrl a"
-mark_done = "ctrl f"
-clear = "ctrl x"
-
-[providers.runner]
-default = "start"
-start = "Return"
-start_terminal = "shift Return"
-remove_history = "ctrl BackSpace"
-
-[providers.dmenu]
-default = "select"
-select = "Return"
-
-[providers.symbols]
-default = "copy"
-copy = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.unicode]
-default = "copy"
-copy = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.menus]
-default = "activate"
-activate = "Return"
-remove_history = "ctrl BackSpace"

env/.config/waybar/config.jsonc

@@ -6,6 +6,7 @@
   "modules-center": ["clock"],
   "modules-right": [
     "pulseaudio",
+		"idle_inhibitor",
     "tray",
     "cpu",
     "memory",
@@ -76,4 +77,12 @@
     // "format-full": "",
     "format-icons": ["", "", "", "", ""],
   },
+	"idle_inhibitor": {
+    "format": "{icon}",
+    "format-icons": {
+        "activated": "",
+        "deactivated": ""
+    },
+	}
+}
 }

env/.config/waybar/style.css

@@ -54,7 +54,8 @@
 #cpu,
 #memory,
 #custom-lock,
-#custom-power {
+#custom-power,
+#idle_inhibitor {
   background-color: @background;
   padding: 0.5rem 1rem;
   margin: 5px 0;
@@ -69,12 +70,18 @@
   font-weight: 900;
 }
 
+
 #pulseaudio {
   color: @red;
   border-radius: 10px 0px 0px 10px;
   margin-left: 1rem;
 }
 
+#idle_inhibitor {
+	border-radius: 0px;
+	margin: 0px;
+}
+
 #tray {
   color: @blue;
   border-radius: 0px 10px 10px 0px;

env/.config/zsh/.zshrc

@@ -19,17 +19,6 @@ zle -N down-line-or-beginning-search
 # Colors
 autoload -Uz colors && colors
 
-#------------------------------ pager ------------------------------
-#eval "$(batman --export-env)"
-# export LESS_TERMCAP_mb="" # magenta
-# export LESS_TERMCAP_md="" # yellow
-# export LESS_TERMCAP_me=""
-# export LESS_TERMCAP_se=""
-# export LESS_TERMCAP_so="" # blue
-# export LESS_TERMCAP_ue=""
-# export LESS_TERMCAP_so="" # underline
-# export LESSHISTFILE="-"
-
 #------------------------------ path ------------------------------
 
 # Helper function to prepend to the $PATH
@@ -70,7 +59,8 @@ path_prepend \
   "$SCRIPTS/mail" \
   "$HOME/.local/pnpm" \
   "$CARGO_HOME/bin" \
-  "$HOME/.local/bin"
+  "$HOME/.local/bin" \
+  "$XDG_DATA_HOME/bob/nvim-bin"
 
 # last arg will be first in $FPATH
 fpath_prepend \
@@ -96,8 +86,6 @@ export HISTFILESIZE=5000
 export SAVEHIST=5000
 export HISTFILE="$XDG_CONFIG_HOME/zsh/history"
 
-#set -o vi
-
 #------------------------------ cdpath ------------------------------
 setopt autocd
 
@@ -131,7 +119,6 @@ zsh_add_plugin "Aloxaf/fzf-tab"
 
 #------------------------------ completions ------------------------------
 # case insensitive path-completion

-#zstyle ':completion:*' matcher-list 'm:{[:lower:][:upper:]}={[:upper:][:lower:]}' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*'

 zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
 
 # partial completion suggestions
@@ -153,10 +140,8 @@ _source_if "$ZDOTDIR/plugins/fzf-tab/fzf-tab.plugin.zsh"
 
 #------------------------------ prompt ------------------------------
 
-# Prompt / managed by brew. (`brew install starship`)
 autoload -Uz promptinit; promptinit
 eval "$(starship init zsh)"
-#prompt pure
 
 #------------------------------ aliases ------------------------------
 
@@ -190,8 +175,10 @@ alias pass='PASSWORD_STORE_DIR=/home/michael/.local/share/gopass/stores/root gop
 alias pc='gopass show --clip'          # get an attribute of a password file and copy to the clipboard.
 alias reload='exec zsh -l'              # reload the shell, useful when making changes.
 alias s='swift'                         # shorthand to access swift commands
-alias st='swift test'                   # swift test
+alias st='swift test' 									# swift test
+alias ste='swift test --enable-code-coverage' # swift test with code coverage enabled.
 alias sb='swift build'                  # swift build
+alias syu='yay -Syu'										# Update packages.
 alias t='tmux'                          # access tmux quickly
 alias tka='tmux kill-server'            # kill tmux server and all sessions.
 alias ts='$SCRIPTS/tmux-sessionator'    # create new tmux session, fuzzy finding common locations.
@@ -201,11 +188,7 @@ alias tks='tmux kill-session -t'        # kill tmux session
 alias temp='cd $(mktemp -d)'            # create a temporary directory and move into it.
 alias vi='nvim'                         # set vi to open neovim
 alias newf='"$SCRIPTS"/newx --function' # generate a new shell function
-alias nlnv='nvim "$LOCAL_ENV"'          # open local environment overrides file in neovime
-alias nvim='unset VIMINIT && unset MYVIMRC && nvim'   # alias nvim to unset vimrc, useful when using both vim & neovim
-alias nvim-mhoush='NVIM_APPNAME=m-housh && nvim'      # set neovim to use my config.
-alias nvim-kickstart='NVIM_APPNAME=kickstart nvim'    # set neovim to use kickstart config.
-alias nvim-lazy='NVIM_APPNAME=lazy nvim'              # set neovim to use lazy config.
+alias n='nvim'
 alias wget="wget --hsts-file=$XDG_DATA_HOME/wget-hsts"  # set wget history location.
 # GPG Yubikey restart relearn when switching keys and stubbed.
 alias yubikeyrestart='gpg-connect-agent killagent /bye && gpg-connect-agent "scd serialno" "learn --force" /bye && gpg --card-status'
@@ -225,6 +208,7 @@ source <(fzf --zsh)
 _source_if "$ZDOTDIR/.zshrc-local"
 _source_if "$LOCAL_ENV"
 _source_if "$SCRIPTS/catppuccin-colors"
+_source_if "$XDG_DATA_HOME/swiftly/env.sh"
 
 # pnpm
 export PNPM_HOME="$XDG_DATA_HOME/pnpm"
@@ -235,12 +219,9 @@ esac
 # pnpm end
 
 # The following lines have been added by Docker Desktop to enable Docker CLI completions.
-# fpath=(/Users/michael/.docker/completions $fpath)
 autoload -Uz compinit
 compinit
 
-#eval "$(ssh-agent -s)" 1>/dev/null
-
 ########################################
 # Set things up for using gpg-agent
 

env/.config/zsh/functions/dp

@@ -1,12 +1,12 @@
 #!/bin/zsh
 
 function dp() {
-  [ -z "$1" ] && echo "Must supply temperature" && return 1
-  [ -z "$2" ] && echo "Must supply relative humidity" && return 1
+	[ -z "$1" ] && echo "Must supply temperature" && return 1
+	[ -z "$2" ] && echo "Must supply relative humidity" && return 1
 
-  local temperature=$1
-  local humidity=$2
+	local temperature=$1
+	local humidity=$2
 
-  /opt/homebrew/bin/psychrometrics dew-point --dry-bulb "$temperature" --relative-humidity "$humidity"
+	psychrometrics dew-point --dry-bulb "$temperature" --relative-humidity "$humidity"
 
 }

env/.config/zsh/functions/n

@@ -1,25 +0,0 @@
-#!/usr/bin/env zsh
-
-# Open's neovim.
-#
-# If the argument passed in is a directory or not supplied, then
-# open neovim with telescope find files opened. Otherwise open the
-# file that is supplied.
-#
-
-function n() {
-  # if [ -z "$1" ]; then
-  #   local gitdir=$(git rev-parse --show-toplevel 2> /dev/null)
-  #
-  #   [ -n "$gitdir" ] \
-  #     && nvim -c ":Telescope git_files" \
-  #     && return 0
-  #
-  #   [ -d "$1" ] \
-  #     && nvim -c ":Telescope find_files" \
-  #     && return 0
-  # fi
-
-  nvim "$@"
-}
-

env/.gnupg/gpg-agent.conf

@@ -2,13 +2,5 @@
 # https://www.gnupg.org/documentation/manuals/gnupg/Agent-Options.html
 enable-ssh-support
 ttyname $GPG_TTY
-default-cache-ttl 60
+default-cache-ttl 120
 max-cache-ttl 120
-#pinentry-program /usr/bin/pinentry-curses
-#pinentry-program /usr/bin/pinentry-gnome3
-#pinentry-program /bin/pinentry-tty
-#pinentry-program /usr/bin/pinentry-x11
-#pinentry-program /usr/local/bin/pinentry-curses
-#pinentry-program /bin/pinentry-dmenu
-
-#pinentry-program /opt/homebrew/bin/pinentry-mac

env/.local/scripts/aap

@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# A wrapper script to run swift-hpa in a docker container and
+# mount the correct volumes, etc.
+#
+# Make sure to run 'hpa-init' first on this machine to setup
+# dependencies, if you have not done so already.
+#
+# To attach to a shell inside the container run:
+# `hpa bash`
+#
+# To run ansible vault commands inside the container run:
+# `hpa ansible-vault ...`
+#
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+############################## MAIN ##############################
+
+# Don't pull images if they're prefixed with 'localhost'.
+if echo "$HPA_DOCKER_IMAGE" | grep -vq "localhost"; then
+
+	# Check if we should pull the image prior to running.
+	last_pull="0"
+	if [[ -f "$HPA_AIRFLOW_CONFIG_DIR/.lastpull" ]]; then
+		last_pull=$(cat "$HPA_AIRFLOW_CONFIG_DIR/.lastpull")
+	fi
+	curr=$(date +%s)
+	diff=$((curr - last_pull))
+
+	if [[ $HPA_AUTO_PULL == "1" ]] && [[ $diff -gt "$HPA_AUTO_PULL_INTERVAL" ]]; then
+		. "$SCRIPTS/hpa-pull" "$HPA_AUTO_PULL_OPTS"
+	fi
+fi
+
+podman run --rm --interactive --tty \
+	--volume "$HPA_AIRFLOW_CONFIG_DIR":/root/.config/hpa:ro \
+	--volume "$HPA_DATA_DIR":/root/.local/share/hpa:ro \
+	--volume "$HPA_CONSULTS_DIR":/consults \
+	--volume "$PWD":/root/project \
+	--secret "$HPA_VAULT_SECRET_KEY" \
+	"$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" "$@"

env/.local/scripts/backup-logger

@@ -0,0 +1,68 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+LOG_DIR="/tmp/logs"
+
+usage() {
+	cat <<EOF
+
+Utility for logging backup runs.
+
+USAGE:
+	$ $THIS <flags> <msg...>
+
+FLAGS:
+	-h | --help:					Show this help page.
+	-s | --show:					Show the log messages.
+	--rm:									Remove the log file
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+show() {
+	[[ ! -f "$LOG_DIR/$LOG_FILE" ]] &&
+		log --warning "Empty log file." &&
+		exit 0
+
+	bat "$LOG_DIR/$LOG_FILE"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+declare -a msg
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-s" ]] || [[ $1 == "--show" ]]; then
+		show && exit 0
+	elif [[ $1 == "--rm" ]]; then
+		rm "$LOG_DIR/$LOG_FILE" && exit 0
+	else
+		msg+=("$1")
+	fi
+	shift
+done
+
+[[ -z "${msg[*]}" ]] && log --error "No message passed to log." && exit 1
+
+log "${msg[@]}"

env/.local/scripts/hpa

@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# A wrapper script to run swift-hpa in a docker container and
+# mount the correct volumes, etc.
+#
+# Make sure to run 'hpa-init' first on this machine to setup
+# dependencies, if you have not done so already.
+#
+# To attach to a shell inside the container run:
+# `hpa bash`
+#
+# To run ansible vault commands inside the container run:
+# `hpa ansible-vault ...`
+#
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+############################## MAIN ##############################
+
+# Don't pull images if they're prefixed with 'localhost'.
+if echo "$HPA_DOCKER_IMAGE" | grep -vq "localhost"; then
+
+	# Check if we should pull the image prior to running.
+	last_pull="0"
+	if [[ -f "$HPA_CONFIG_DIR/.lastpull" ]]; then
+		last_pull=$(cat "$HPA_CONFIG_DIR/.lastpull")
+	fi
+	curr=$(date +%s)
+	diff=$((curr - last_pull))
+
+	if [[ $HPA_AUTO_PULL == "1" ]] && [[ $diff -gt "$HPA_AUTO_PULL_INTERVAL" ]]; then
+		. "$SCRIPTS/hpa-pull" "$HPA_AUTO_PULL_OPTS"
+	fi
+fi
+
+echo "ARGS: $@"
+
+podman run --rm --interactive --tty \
+	--volume "$HPA_CONFIG_DIR":/root/.config/hpa:ro \
+	--volume "$HPA_DATA_DIR":/root/.local/share/hpa:ro \
+	--volume "$HPA_CONSULTS_DIR":/consults \
+	--volume "$PWD":/root/project \
+	--secret "$HPA_VAULT_SECRET_KEY" \
+	"$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" "$@"

env/.local/scripts/hpa-create

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+title="Creating project..."
+script="${SCRIPTS:-$HOME/.local/scripts}/utils/hpa/hpa-create"
+first_arg=${1:-""}
+if [[ $first_arg == "-h" ]] || [[ $first_arg == "--help" ]]; then
+	. "$script" $*
+else
+	# bash -c "$script $*" | tr -d '\r' | head -1
+	gum spin --show-output --title "$title" -- bash -c "$script $*" | tr -d '\r' | head -1
+fi

env/.local/scripts/hpa-init

@@ -0,0 +1,98 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+# Load environment / shared variables.
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+usage() {
+	cat <<EOF
+
+Setup dependencies for running hpa script in docker.  This only needs to be
+ran once on a new machine.
+
+USAGE:
+  $ $THIS <flags> <shell> <completion-file>
+
+FLAGS:
+  -h | --help:          Show this help page.
+
+DEFAULTS:
+  shell:                Default is 'zsh', accepts 'zsh' | 'bash' | 'fish'
+  completion-file:      Default is '~/.zsh/completions/_hpa'
+
+ENVIRONMENT:
+  CONSULTS_DIR:         Set the directory where consults / projects are stored.
+                        (default: '~/work/consults')
+
+  HPA_DOCKER_TAG:       Set the docker image tag to use for the hpa docker image
+                        (default: 'latest')
+
+  HPA_VAULT_SECRET_KEY: Set the key used for the ansible-vault secret.
+                        (default: 'vault-pass')
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+generate-completion() {
+	local output_dir output type
+	type=${1:-"zsh"}
+	output=${2:-$HOME/.zsh/completions/_hpa}
+	output_dir=$(dirname "$output")
+
+	log "Generating completion: type: '$type', to: $output"
+
+	[[ ! -d "$output_dir" ]] && mkdir -p "$output_dir"
+	(
+		podman run --rm -it "$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" \
+			--generate-completion-script "$type" |
+			tr -d '\r'
+	) >"$output"
+}
+
+generate-secret() {
+	log "Generating vault secret for key: '$HPA_VAULT_SECRET_KEY'"
+	local secret
+	secret="$(pass -c ansible/vault-pass)"
+	printf "%s" "$secret" | podman secret create "$HPA_VAULT_SECRET_KEY" -
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+first_arg=${1:-""}
+if [[ $first_arg == "-h" ]] || [[ $first_arg == "--help" ]]; then
+	usage && exit 0
+else
+	# Setup logging file and label.
+	source "$SCRIPTS/hypr/logging"
+	setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+	log "Starting init..."
+
+	generate-completion "$@"
+	generate-secret
+
+	log "Generating directories, if they don't exist."
+	mkdir -p "$HPA_CONSULTS_DIR" &>/dev/null
+	mkdir "$HPA_DATA_DIR" &>/dev/null
+
+	log "Cloning required template and playbook, if they don't exist"
+	[[ ! -d "$HPA_PLAYBOOK_DIR" ]] && git clone "$HPA_PLAYBOOK_URL" "$HPA_PLAYBOOK_DIR"
+	[[ ! -d "$HPA_CONSULT_TEMPLATE_DIR" ]] && git clone "$HPA_CONSULT_TEMPLATE_URL" "$HPA_CONSULT_TEMPLATE_DIR"
+	[[ ! -d "$HPA_AIRFLOW_TEMPLATE_DIR" ]] && git clone "$HPA_AIRFLOW_TEMPLATE_URL" "$HPA_AIRFLOW_TEMPLATE_DIR"
+fi

env/.local/scripts/hpa-pull

@@ -0,0 +1,112 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+# Load environment / shared variables.
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+usage() {
+	cat <<EOF
+
+Pulls / updates template, playbook, docker image, etc.
+
+USAGE:
+  $ $THIS <flags>
+
+FLAGS:
+  -a | --all:           Pull everything (default).
+  -d | --docker:        Pull docker image.
+  -p | --playbook:      Pull ansible-hpa-playbook.
+  -t | --template:      Pull consult template.
+  -h | --help:          Show this help page.
+
+If no flags are passed in then we will pull everything.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+pull-repo() {
+	local dir=${1:-""}
+	[[ -z "$dir" ]] &&
+		log --error "Directory not supplied to pull git repo." &&
+		exit 1
+
+	pushd "$dir" &>/dev/null || exit 1
+	(
+		git pull
+	)
+	popd &>/dev/null
+}
+
+pull-docker() {
+	log --echo "Pulling docker image: '$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG'"
+	podman pull "$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG"
+}
+
+pull-playbook() {
+	log --echo "Pulling playbook: '$HPA_PLAYBOOK_DIR'"
+	pull-repo "$HPA_PLAYBOOK_DIR"
+}
+
+pull-template() {
+	log --echo "Pulling template: '$HPA_CONSULT_TEMPLATE_DIR'"
+	pull-repo "$HPA_CONSULT_TEMPLATE_DIR"
+
+	log --echo "Pulling airflow assessment template: '$HPA_AIRFLOW_TEMPLATE_DIR'"
+	pull-repo "$HPA_AIRFLOW_TEMPLATE_DIR"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+all_flag="1"
+docker_flag="0"
+playbook_flag="0"
+template_flag="0"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-a" ]] || [[ $1 == "--all" ]]; then
+		all_flag="1"
+		break
+	elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-d" ]] || [[ $1 == "--docker" ]]; then
+		all_flag="0"
+		docker_flag="1"
+	elif [[ $1 == "-p" ]] || [[ $1 == "--playbook" ]]; then
+		all_flag="0"
+		playbook_flag="1"
+	elif [[ $1 == "-t" ]] || [[ $1 == "--template" ]]; then
+		all_flag="0"
+		template_flag="1"
+	fi
+	shift
+done
+
+if [[ $all_flag == "1" ]]; then
+	docker_flag="1"
+	playbook_flag="1"
+	template_flag="1"
+fi
+
+[[ $docker_flag == "1" ]] && pull-docker
+[[ $playbook_flag == "1" ]] && pull-playbook
+[[ $template_flag == "1" ]] && pull-template
+date +%s >"$HPA_CONFIG_DIR/.lastpull"
+date +%s >"$HPA_AIRFLOW_CONFIG_DIR/.lastpull"

env/.local/scripts/hypr/launch

@@ -11,7 +11,7 @@ THIS=$(basename "$THIS_FILE")
 LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 
 usage() {
-  cat <<EOF
+	cat <<EOF
 
 Launch or focus / close a window based on pattern contained within the window
 class name. (Default is to focus the window). 
@@ -61,57 +61,57 @@ special_flag="0"
 special=""
 
 while [[ $# -gt 0 ]]; do
-  if [[ $1 == "-c" ]] || [[ $1 == "--or-close" ]]; then
-    close_flag="1"
-    action="closewindow"
-  elif [[ $1 == "-f" ]] || [[ $1 == "--or-focus" ]]; then
-    focus_flag="1"
-    action="focuswindow"
-  elif [[ $1 == "-s" ]] || [[ $1 == "--special" ]]; then
-    shift
-    special_flag="1"
-    special=$1
-  elif [[ $1 == "-o" ]] || [[ $1 == "--focus-active-only" ]]; then
-    focus_flag="1"
-    focus_active_only_flag="1"
-    action="focuswindow"
-  elif [[ $1 == "-x" ]] || [[ $1 == "--close-active-only" ]]; then
-    close_flag="1"
-    close_active_only_flag="1"
-    action="closewindow"
-  elif [[ $1 == "-n" ]] || [[ $1 == "--new" ]]; then
-    new_instance_flag="1"
-  elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
-    usage && exit 0
-  elif [[ -z $pattern ]]; then
-    pattern=$1
-  else
-    launch_cmd+=("$1")
-  fi
-  shift
+	if [[ $1 == "-c" ]] || [[ $1 == "--or-close" ]]; then
+		close_flag="1"
+		action="closewindow"
+	elif [[ $1 == "-f" ]] || [[ $1 == "--or-focus" ]]; then
+		focus_flag="1"
+		action="focuswindow"
+	elif [[ $1 == "-s" ]] || [[ $1 == "--special" ]]; then
+		shift
+		special_flag="1"
+		special=$1
+	elif [[ $1 == "-o" ]] || [[ $1 == "--focus-active-only" ]]; then
+		focus_flag="1"
+		focus_active_only_flag="1"
+		action="focuswindow"
+	elif [[ $1 == "-x" ]] || [[ $1 == "--close-active-only" ]]; then
+		close_flag="1"
+		close_active_only_flag="1"
+		action="closewindow"
+	elif [[ $1 == "-n" ]] || [[ $1 == "--new" ]]; then
+		new_instance_flag="1"
+	elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ -z $pattern ]]; then
+		pattern=$1
+	else
+		launch_cmd+=("$1")
+	fi
+	shift
 done
 
 log() {
-  logging log --source "$THIS_FILE" "$@"
+	logging log --source "$THIS_FILE" "$@"
 }
 
 # Redirects all output of hyprctl dispatch commands.
 hypr_dispatch() {
-  hyprctl dispatch "$@" >/dev/null 2>&1
+	hyprctl dispatch "$@" >/dev/null 2>&1
 }
 
 toggle_special() {
-  if [[ -z $special ]]; then
-    log --error " No name supplied for special workspace."
-    exit 1
-  fi
-  hypr_dispatch togglespecialworkspace $special
+	if [[ -z $special ]]; then
+		log --error " No name supplied for special workspace."
+		exit 1
+	fi
+	hypr_dispatch togglespecialworkspace $special
 }
 
 launch_application() {
-  log "Launching..."
-  log "'${launch_cmd[@]}'"
-  eval exec ${launch_cmd[@]}
+	log "Launching..."
+	log "'${launch_cmd[*]}'"
+	eval exec "${launch_cmd[*]}"
 }
 
 ################################################################################
@@ -123,11 +123,11 @@ source "$SCRIPTS/hypr/logging"
 setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 if [[ -z $pattern ]]; then
-  log --error "Must supply a pattern to match the window class."
-  usage && exit 1
+	log --error "Must supply a pattern to match the window class."
+	usage && exit 1
 elif [[ -z $launch_cmd ]]; then
-  log --error "Must supply a launch command to match the window class."
-  usage && exit 1
+	log --error "Must supply a launch command to match the window class."
+	usage && exit 1
 fi
 
 log "Pattern: $pattern"
@@ -135,13 +135,13 @@ addresses=$(hyprctl clients -j | jq ".[] | select(.class | contains(\"$pattern\"
 
 # If no addresses, then launch the application.
 if [[ -z $addresses ]] || [[ $new_instance_flag == "1" ]]; then
-  log "No addresses found or new instance flag set."
-  # Toggle special workspace if applicable.
-  if [[ $special_flag == "1" ]]; then
-    log "Toggling special workspace."
-    toggle_special
-  fi
-  launch_application && exit 0
+	log "No addresses found or new instance flag set."
+	# Toggle special workspace if applicable.
+	if [[ $special_flag == "1" ]]; then
+		log "Toggling special workspace."
+		toggle_special
+	fi
+	launch_application && exit 0
 fi
 
 active_window_workspace=$(hyprctl activewindow -j | jq -r '.workspace.name')
@@ -150,45 +150,45 @@ active_window_workspace=$(hyprctl activewindow -j | jq -r '.workspace.name')
 # we just toggle the special workspace.  This keeps "special" apps alive, but closes and / opens
 # the special workspace when invoked.
 if [[ $special_flag == "1" ]] && [[ $active_window_workspace =~ $special ]]; then
-  toggle_special && exit 0
+	toggle_special && exit 0
 fi
 
 # Check if both close and focus flags were passed, so we don't do the
 # wrong thing.
 if [[ $focus_flag == "1" ]] && [[ $close_flag == "1" ]]; then
-  log --error "Both focus and close flag were passed."
-  exit 1
+	log --error "Both focus and close flag were passed."
+	exit 1
 fi
 
 for address in ${addresses[@]}; do
-  # Clean the address of quotes.
-  address=${address//\"/}
-  log "Handling address: '$address'"
+	# Clean the address of quotes.
+	address=${address//\"/}
+	log "Handling address: '$address'"
 
-  if [[ $focus_active_only_flag == "1" ]] || [[ $close_active_only_flag == "1" ]]; then
-    # get the workspace name for the address.
-    workspace=$(hyprctl clients -j | jq -r ".[] | select(.address == \"$address\") | .workspace.name")
+	if [[ $focus_active_only_flag == "1" ]] || [[ $close_active_only_flag == "1" ]]; then
+		# get the workspace name for the address.
+		workspace=$(hyprctl clients -j | jq -r ".[] | select(.address == \"$address\") | .workspace.name")
 
-    # check that the window is on the active workspace.
-    if [[ $active_window_workspace == $workspace ]]; then
-      log "Performing action: '$action', on window: '$address'"
-      hypr_dispatch $action "address:$address"
-      # early out if focusing a window.
-      [[ $focus_active_only_flag ]] && exit 0
-    else
-      # the window is not on the active workspace, so skip it.
-      log "Skipping window: $address"
-    fi
-  else
-    # We don't have the focus_active_only_flag or close_active_only_flag set, so we perform
-    # the action on the window.
-    log "Performing action: '$action', on window: '$address'"
-    hypr_dispatch $action "address:$address"
-  fi
+		# check that the window is on the active workspace.
+		if [[ $active_window_workspace == $workspace ]]; then
+			log "Performing action: '$action', on window: '$address'"
+			hypr_dispatch $action "address:$address"
+			# early out if focusing a window.
+			[[ $focus_active_only_flag ]] && exit 0
+		else
+			# the window is not on the active workspace, so skip it.
+			log "Skipping window: $address"
+		fi
+	else
+		# We don't have the focus_active_only_flag or close_active_only_flag set, so we perform
+		# the action on the window.
+		log "Performing action: '$action', on window: '$address'"
+		hypr_dispatch $action "address:$address"
+	fi
 done
 
 # If we made it here and focus_active_only_flag was set, then we did not
 # find a window on the active workspace, so we launch a new window.
 if [[ $focus_active_only_flag == "1" ]]; then
-  launch_application
+	launch_application
 fi

env/.local/scripts/hypr/logging

@@ -43,14 +43,14 @@ warn_flag="0"
 error_flag="0"
 
 __msg() {
-  if [[ -z "$@" ]]; then
+  if [[ -z "$*" ]]; then
     echo -e "\e[31m[ERROR]:\e[0m No logs were supplied."
     exit 1
   fi
   if [[ $warn_flag == "1" ]]; then
-    echo -e "\e[33m[WARN]:\e[0m $@"
+    echo -e "\e[33m[WARN]:\e[0m $*"
   elif [[ $error_flag == "1" ]]; then
-    echo -e "\e[31m[ERROR]:\e[0m $@"
+    echo -e "\e[31m[ERROR]:\e[0m $*"
   else
     echo "$@"
   fi
@@ -72,6 +72,7 @@ logging() {
 
   # Reset flags
   log_flag="0"
+  echo_flag="0"
   warn_flag="0"
   error_flag="0"
   source_file=""
@@ -79,11 +80,11 @@ logging() {
 
   while [[ $# -gt 0 ]]; do
     if [[ $1 == "-w" ]] || [[ $1 == "--warn" ]] || [[ $1 == "--warning" ]]; then
-      log_flag="1"
       warn_flag="1"
     elif [[ $1 == "-e" ]] || [[ $1 =~ ^--error ]]; then
-      log_flag="1"
       error_flag="1"
+    elif [[ $1 =~ ^--echo ]]; then
+      echo_flag="1"
     elif [[ $1 == "-s" ]] || [[ $1 =~ ^--source ]]; then
       shift
       source_file="$1"
@@ -100,20 +101,21 @@ logging() {
     exit 1
   fi
 
-  if [[ -z $args ]]; then
+  if [[ -z "${args[*]}" ]]; then
     echo -e "\e[31m[ERROR]:\e[0m No log message supplied."
     exit 1
   fi
 
-  msg="$(__msg ${args[@]})"
+  msg="$(__msg "${args[@]}")"
 
-  if [[ $LOG_ENABLE_DRY_RUN == "0" ]]; then
+  if [[ $LOG_ENABLE_DRY_RUN == "0" ]] && [[ $log_flag == "1" ]]; then
     # Loop over log files logging message to each file.
     for i in "${!LOG_FILE[@]}"; do
       local file=${LOG_DIR}/${LOG_FILE[i]}
       local id=$LOG_INVOCATION_ID
       local label=${LOG_LABEL[i]:-"$LOG_LABEL"}
-      local time=$(date '+%D %H:%M:%S')
+      local time
+      time=$(date '+%D %H:%M:%S')
 
       if [[ -z $file ]] || [[ -z $id ]] || [[ -z $label ]]; then
         echo "Logging not properly setup."
@@ -130,6 +132,8 @@ logging() {
       echo -e "[id: $id]$msg"
     elif [[ $warn_flag == "1" ]]; then
       echo -e "[id: $id]$msg"
+    elif [[ $echo_flag == "1" ]]; then
+      echo -e "$msg"
     fi
   else
     # Dry run mode, so just log to the console
@@ -168,7 +172,7 @@ setup-logging() {
 
   if [[ -n $LOG_LABEL ]] && [[ ! $LOG_LABEL =~ $label ]]; then
     LOG_LABEL+=("${LOG_LABEL[@]}=>$label")
-  elif [[ ! $LOG_LABEL =~ $label ]]; then
+  elif [[ ! ${LOG_LABEL[*]} =~ $label ]]; then
     LOG_LABEL+=("$label")
   fi
 
@@ -179,9 +183,9 @@ setup-logging() {
 }
 
 print_logger_env() {
-  echo "LOG_FILE: ${LOG_FILE[@]}"
+  echo "LOG_FILE: ${LOG_FILE[*]}"
   echo "LOG_INVOCATION_ID: $LOG_INVOCATION_ID"
-  echo "LOG_LABEL: ${LOG_LABEL[@]}"
+  echo "LOG_LABEL: ${LOG_LABEL[*]}"
 }
 
 export -f setup-logging

env/.local/scripts/hypr/utils/webapp/install

@@ -3,7 +3,9 @@
 # Adapted from https://github.com/basecamp/omarchy/tree/master?tab=readme-ov-file
 
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename "$THIS_FILE")
+THIS=${THIS:-$(basename "$THIS_FILE")}
+LOG_FILE=${LOG_FILE:-"$THIS.log"}
+LOG_LABEL=$(basename "$THIS_FILE")
 
 function usage() {
   cat <<EOF
@@ -237,7 +239,7 @@ EOF
 
 # Setup logging file and label
 source "$SCRIPTS/hypr/logging"
-setup-logging "$THIS.log" "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 export LOG_ENABLE_DRY_RUN="$dry_run"
 
 if [[ -z "$XDG_DATA_HOME" ]]; then
@@ -287,7 +289,7 @@ set_icon_ref
 
 # Check that an exec command is set, or default to the 'launch-webapp' script.
 if [[ -z $exec_cmd ]]; then
-  exec_cmd="$SCRIPTS/hypr/launch-webapp $app_url"
+  exec_cmd="$SCRIPTS/hypr/webapp launch $app_url"
 fi
 
 log "\e[032mCreating web app:\e[0m $desktop_file"

env/.local/scripts/hypr/utils/webapp/launch

@@ -4,7 +4,7 @@
 SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 THIS_FILE=${BASH_SOURCE[0]}
 LOG_LABEL=$(basename "$THIS_FILE")
-THIS=$(basename "$THIS_FILE")
+THIS=${THIS:-$(basename "$THIS_FILE")}
 LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 
 usage() {
@@ -29,7 +29,7 @@ NOTES:
 
 Any extra arguments after '--' get passed directly to the browser invocation.
   
-  $ launch-webapp https://example.com -- --some-random-flag-for-browser=1
+  $ $THIS https://example.com -- --some-random-flag-for-browser=1
 
 Any options passed in prior to the '--' get sent to the 'launch' script, so you can pass
 options that are not specifically shown here, but the ones shown would be the most commonly
@@ -94,9 +94,9 @@ fi
 # Any left over args after "--"
 app_args="$@"
 
-log "URL: $url"
-log "Launch args: ${launch_args[@]}"
-log "App args: ${app_args}"
+log "Launching URL: $url"
+log "	Launch args: ${launch_args[@]}"
+log "	App args: ${app_args}"
 
 $SCRIPTS/hypr/launch "${launch_args[@]}" "$(pattern)" \
   setsid uwsm app -- $(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$browser 2>/dev/null | head -1) --app="$url" "$app_args"

env/.local/scripts/hypr/webapp

@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+usage() {
+	cat <<EOF
+Utility for launching or installing a progressive web app.
+
+	USAGE:
+		$ $THIS <flags> <command>
+
+	FLAGS:
+		-h | --help:					Show this help page.
+
+	COMMANDS:
+		install:							Generate a '.desktop' file for a web app.
+		launch:								Launch a url as a web app.
+
+RUN '$THIS <command> --help' for more information about a command.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage
+	elif [[ $1 == "install" ]]; then
+		shift
+		THIS="$THIS install" "$SCRIPTS/hypr/utils/webapp/install" "$@"
+	elif [[ $1 == "launch" ]]; then
+		shift
+		THIS="$THIS launch" "$SCRIPTS/hypr/utils/webapp/launch" "$@"
+	fi
+	shift
+done
+

env/.local/scripts/kanatactl

@@ -15,10 +15,9 @@ DEV_ENV=${DEV_ENV:-""}
 KBD=${KBD:-""} # Keyboard config to use, either "voyager" or "macbook"
 
 usage() {
-  cat <<EOF
+	cat <<EOF
 
-Manages kanata qmk keyboard program, which needs to be built locally. Currently the linux builds
-are only for x86.  Also manages the kanata systemd service.
+Manages kanata qmk keyboard program, which needs to be built locally. Also manages the kanata systemd service.
 
 USAGE:
 
@@ -30,8 +29,6 @@ FLAGS:
 COMMANDS:
   config:         Commands for the kanata keyboard configuration file(s).
   service:        Commands for the kanata systemd service.
-  pkg:            Commands for the kanata package.
-  bootstrap:      Bootstrap a new machine, performs installation, enables, and starts kanata systemd service.
   logs:           View the log file.
 
 Run "$THIS <command> --help" for more information about a command.
@@ -41,17 +38,7 @@ EOF
 
 # Logging utility function, use in place of echo.
 log() {
-  logging log --source "$THIS_FILE" "$@"
-}
-
-# Bootstrap a new machine, by building and installing the kanata executable,
-# installing the systemd service files, and enable / start the service.
-bootstrap() {
-  log "Bootstrapping new system..."
-  $THIS_FILE pkg install
-  $THIS_FILE service install
-  $THIS_FILE service enable
-  $THIS_FILE service start
+	logging log --source "$THIS_FILE" "$@"
 }
 
 ################################################################################
@@ -63,29 +50,23 @@ source "$SCRIPTS/hypr/logging"
 setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 while [[ $# -gt 0 ]]; do
-  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
-    usage && exit 0
-  elif [[ $1 == "bootstrap" ]]; then
-    bootstrap && exit 0
-  elif [[ $1 == "config" ]]; then
-    shift
-    THIS="$THIS config" $SCRIPTS/utils/kanatactl/config "$@"
-    exit $?
-  elif [[ $1 == "service" ]]; then
-    shift
-    THIS="$THIS service" $SCRIPTS/utils/kanatactl/service "$@"
-    exit $?
-  elif [[ $1 == "pkg" ]]; then
-    shift
-    THIS="$THIS pkg" $SCRIPTS/utils/kanatactl/pkg "$@"
-    exit $?
-  elif [[ $1 == "logs" ]]; then
-    bat ${LOG_DIR:-/tmp/logs}/$LOG_FILE && exit 0
-  elif [[ $1 == "update" ]]; then
-    install_or_update "Updating" && exit 0
-  else
-    break
-  fi
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "config" ]]; then
+		shift
+		THIS="$THIS config" $SCRIPTS/utils/kanatactl/config "$@"
+		exit $?
+	elif [[ $1 == "service" ]]; then
+		shift
+		THIS="$THIS service" $SCRIPTS/utils/kanatactl/service "$@"
+		exit $?
+	elif [[ $1 == "logs" ]]; then
+		bat ${LOG_DIR:-/tmp/logs}/$LOG_FILE && exit 0
+	elif [[ $1 == "update" ]]; then
+		install_or_update "Updating" && exit 0
+	else
+		break
+	fi
 done
 
 # If we've made it here, then we didn't handle the command.

env/.local/scripts/neomutt

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+# vim: filetype=bash
+#
+# Set's TERM for neomutt so that colors work correctly.
+TERM=xterm-direct /usr/bin/neomutt

env/.local/scripts/shorten-url

@@ -0,0 +1,96 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# Global variables
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"} && export LOG_FILE
+
+# Local variables
+declare -a args
+no_spin_flag="0"
+create_flag="0"
+logs_flag="0"
+
+usage() {
+	cat <<EOF
+Shorten url utility script.
+
+USAGE:
+  $THIS <flags> <command>
+
+FLAGS:
+  --no-spin:          Disable spinners for commands.
+  -h | --help:        Show this help page.
+
+COMMANDS:
+	create:             Create a new shortened url.
+	logs:               View or remove the logs.
+
+Run '$THIS <command> --help' for more information on a command.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+#
+# This gets exported for subcommands to use.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+} && export -f log
+
+create() {
+	script="$SCRIPTS/utils/shorten-url/create"
+	export THIS="${THIS} create"
+
+	if [[ $no_spin_flag == "1" ]]; then
+		bash -c "$script ${args[*]}"
+	else
+		title="Generating short url..."
+		gum spin --show-output --title="$title" -- bash -c "$script ${args[*]}"
+	fi
+}
+
+logs() {
+	script="$SCRIPTS/utils/shorten-url/logs"
+	export THIS="$THIS logs"
+	source "$script" "${args[*]}"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "--no-spin" ]]; then
+		no_spin_flag="1"
+	elif [[ $1 == "create" ]]; then
+		create_flag="1"
+	elif [[ $1 == "logs" ]]; then
+		logs_flag="1"
+	elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		no_spin_flag="1"
+		args+=("$1")
+	else
+		args+=("$1")
+	fi
+	shift
+done
+
+if [[ $create_flag == "1" ]]; then
+	create
+elif [[ $logs_flag == "1" ]]; then
+	logs
+else
+	# If we made it here, no subcommands were executed.
+	usage
+fi

env/.local/scripts/swift-dev

@@ -0,0 +1,107 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+XDG_CONFIG_HOME=${XDG_CONFIG_HOME:-$HOME/.config}
+XDG_DATA_HOME=${XDG_DATA_HOME:-$HOME/.local/share}
+IMAGE="git.housh.dev/michael/swift-dev-container"
+IMAGE_TAG="latest"
+
+declare cmd dir pull_flag run_flag
+cmd=""
+dir=""
+pull_flag="0"
+run_flag="1"
+
+usage() {
+	cat <<EOF
+Runs neovim inside swift-dev-container docker container for working on swift projects.  
+
+Currently I'm unable to get swift to install on arch linux, so this gives me working lsp, etc.
+
+USAGE:
+	$ $THIS <flags> <command> -- <docker comand>
+
+FLAGS:
+	-h | --help:						Show this help page.
+	-p | --pull:						Used with run command, to pull/update image before running.
+	-t | --tag <tag>:				Used with run command to specify the image tag to use.
+
+COMMANDS:
+	pull <tag>:							Pull the dev container image, tag is optional (default; 'latest').
+	run <dir> (default):		Run the dev container in the directory, if directory not supplied it 
+													will default to PWD.
+
+NOTES:
+	Run command is implied / default, so it's not required to be passed if you just want to run the
+	container.  For example in your swift project directory you can run 'swift-dev' and a container
+	will start.
+
+	This will properly mount '~/.config/nvim' and '~/.local/share/nvim' inside the container.
+
+	If you would like to run a custom command / not run neovim in the container then it MUST follow
+	'--'.  For example, 'swift-dev -- /bin/bash'.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+pull() {
+	log "Pulling image: '$IMAGE:$IMAGE_TAG'"
+	podman pull "$IMAGE:$IMAGE_TAG"
+}
+
+run() {
+	[[ -z $dir ]] && dir="$PWD"
+	[[ -z $cmd ]] && cmd="/root/.local/share/bob/nvim-bin/nvim"
+	log "Running '$IMAGE:$IMAGE_TAG', in: '$dir'"
+	podman run -it --rm \
+		--volume "$XDG_CONFIG_HOME/nvim":/root/.config/nvim \
+		--volume "$XDG_DATA_HOME/nvim":/root/.local/share/nvim \
+		--volume "$dir":/root/dev \
+		"$IMAGE:$IMAGE_TAG" "$cmd"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-p" ]] || [[ $1 == "--pull" ]]; then
+		pull_flag="1"
+	elif [[ $1 == "-t" ]] || [[ $1 == "--tag" ]]; then
+		[[ -n ${2:-""} ]] || (log --error "Must supply a tag" && exit 1)
+		IMAGE_TAG=$2
+		shift
+	elif [[ $1 == "pull" ]]; then
+		run_flag="0"
+		pull_flag="1"
+	elif [[ $1 == "--" ]]; then
+		shift
+		cmd="$*"
+	elif [[ ! $1 == "run" ]]; then
+		dir="$1"
+	fi
+	shift
+done
+
+[[ $pull_flag = "1" ]] && pull
+[[ $run_flag = "1" ]] && run

env/.local/scripts/tmux-kill-old-sessions

@@ -0,0 +1,43 @@
+#!/usr/bin/env bash
+
+# Kills tmux sessions that are past the threshold to free up resources.
+#
+# Adapted from https://gist.github.com/dhulihan/4c65e868851660fb0d8bfa2d059e7967
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+# Threshold
+TOO_OLD_THRESHOLD=7200 # 2 hours
+NOW=$(date +%s)
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+tmux ls -F '#{session_name}:#{session_activity}' | while read -r line; do
+  session_name=${line%:*}
+  last_activity=${line#*:}
+  elapsed=$((NOW - last_activity))
+
+  if [[ "$elapsed" -gt "$TOO_OLD_THRESHOLD" ]]; then
+    log "$session_name is ${elapsed}s inactive, killing..."
+    tmux kill-session -t "$session_name"
+  fi
+done

env/.local/scripts/tmux-sessionator

@@ -55,7 +55,9 @@ function create_session() {
 function create_email_session() {
   tmux new-session -ds email -n work neomutt
   tmux new-window -t email -d -n personal neomutt
+  tmux new-window -t email -d -n iCloud neomutt
   tmux send-keys -t email.1 'i2'
+  tmux send-keys -t email.3 'i3'
 }
 
 ############################## MAIN ##############################

env/.local/scripts/utils/hpa/hpa-create

@@ -0,0 +1,162 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# NOTE: This script is required so that we can use 'gum spin' during creation
+#       of the project, otherwise the spinner doesn't actually show up when
+#       the utility functions live in the same file.
+#       https://github.com/charmbracelet/gum/issues/419
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+# Load environment / shared variables.
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+declare airflow_flag no_git_flag no_push_flag date_opt
+airflow_flag="0"
+no_git_flag="0"
+no_push_flag="0"
+date_opt=$(date '+%Y.%m.%d')
+
+usage() {
+	cat <<EOF
+
+A utility script to generate a new home performance assessment project or
+airflow assessment project.
+
+All output from the 'hpa' command get suppressed so that this script can
+be piped / used to automatically cd into the directory after creation to
+quickly get to work on the new project.
+
+This generates projects directories with the format of '2025.11.06.Customer',
+will appropriately set the directory to use inside the docker container used
+to generate the project, and then echo the local directory that was created.
+
+It also initializes the project as a git repository.
+
+USAGE:
+  $ $THIS <flags> <customer>
+
+FLAGS:
+  -a | --airflow:       Generate using the airflow assessment project template.
+  -d | --date:          Override the date the project was started.
+  -g | --no-git:        Do not initialize a git repository for the project.
+  -h | --help:          Show this help page.
+  -p | --no-push:       Do not push project to remote repository.
+
+ENVIRONMENT:
+  CONSULTS_DIR:             Sets the location of new projects 
+                            (default: ~/work/consults)
+
+  CONSULT_ORIGIN_BASE_URL:  Sets the base url for the project git origin.
+                            (default: ssh://git@git.housh.dev:2222/consults)
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+create() {
+	local customer container_dir script suffix
+	customer=${1:-""}
+
+	[[ -z $customer ]] &&
+		log --error "Must supply a customer name for the project" &&
+		exit 1
+
+	log "Generating project for: '$customer'"
+
+	# Setup approriate configuration and project suffix.
+	if [[ $airflow_flag == "1" ]]; then
+		suffix="AAP"
+		script="$SCRIPTS/aap"
+	else
+		suffix="HPA"
+		script="$SCRIPTS/hpa"
+	fi
+
+	[[ ! -f $SCRIPTS/hpa ]] &&
+		log --error "Unable to find the script: '$script'." &&
+		exit 1
+
+	log "Using script: '$script'"
+
+	container_dir=$(
+		"$script" create --quiet "/consults/$date_opt.$customer.$suffix"
+	)
+	echo "$HPA_CONSULTS_DIR/$(basename "$container_dir")"
+}
+
+initialize-git() {
+	local dir
+	read -r dir
+
+	dir=$(echo "$dir" | tr -d '\r' | head -1)
+
+	if [[ $no_git_flag == "0" ]]; then
+
+		[[ ! -d $dir ]] &&
+			log --error "Could not initialize git directory not found: '$dir'" &&
+			exit 1
+
+		log "Initializing git repository"
+
+		pushd "$dir" &>/dev/null || exit 1
+		(
+			git init
+			git lfs install
+			git lfs track '*.png'
+			git lfs track '*.pdf'
+			git add .
+			git commit --all --message="Initial commit"
+			git remote add origin "$HPA_CONSULT_ORIGIN_BASE_URL/$(basename "$dir")"
+			if [[ $no_push_flag == "0" ]]; then
+				git push --set-upstream origin main
+			fi
+		) &>/dev/null
+		popd &>/dev/null
+	else
+		log "Skipping git initialization"
+	fi
+
+	echo "$dir"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+declare customer output
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-a" ]] || [[ $1 == "--airflow" ]]; then
+		airflow_flag="1"
+	elif [[ $1 == "-d" ]] || [[ $1 == "--date" ]]; then
+		shift
+		date_opt="$1"
+	elif [[ $1 == "-g" ]] || [[ $1 == "--no-git" ]]; then
+		no_git_flag="1"
+	elif [[ $1 == "-p" ]] || [[ $1 == "--no-push" ]]; then
+		no_push_flag="1"
+	else
+		customer=$1
+	fi
+	shift
+done
+
+output=$(create "$customer" | initialize-git)
+echo "$output"

env/.local/scripts/utils/hpa/hpa.env

@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+
+# Set's up environment variables used in the various 'hpa*' scripts.
+#
+# This allows them all to be set / declared in one place, then those
+# scripts just need to source this file to use them.
+#
+# All variables can be overriden by setting in your shell env.
+
+# XDG vars.
+XDG_CONFIG_HOME=${XDG_CONFIG_HOME:-$HOME/.config}
+XDG_DATA_HOME=${XDG_DATA_HOME:-$HOME/.local/share}
+
+# Docker vars.
+HPA_DOCKER_IMAGE=${HPA_DOCKER_IMAGE:-"git.housh.dev/michael/swift-hpa"}
+HPA_DOCKER_TAG=${HPA_DOCKER_TAG:-"latest"}
+
+# Auto pull options to be ran before running the hpa docker
+# container, default is always pull new images and repositories.
+HPA_AUTO_PULL=${HPA_AUTO_PULL:="1"}
+HPA_AUTO_PULL_INTERVAL="3600" # 1 hour
+HPA_AUTO_PULL_OPTS=${HPA_AUTO_PULL_OPTS:-"--all"}
+
+HPA_CONFIG_DIR="$XDG_CONFIG_HOME/hpa"
+HPA_DATA_DIR="$XDG_DATA_HOME/hpa"
+HPA_PLAYBOOK_DIR="$HPA_DATA_DIR/playbook"
+HPA_PLAYBOOK_URL="ssh://git@git.housh.dev:2222/michael/ansible-hpa-playbook.git"
+HPA_VAULT_SECRET_KEY="${HPA_VAULT_SECRET_KEY:-vault-pass}"
+
+# Consults vars.
+HPA_CONSULTS_DIR=${CONSULTS_DIR:-$HOME/work/consults}
+HPA_CONSULT_ORIGIN_BASE_URL=${CONSULT_ORIGIN_BASE_URL:-"ssh://git@git.housh.dev:2222/consults"}
+HPA_CONSULT_TEMPLATE_DIR=${HPA_DATA_DIR}/template
+HPA_CONSULT_TEMPLATE_URL="ssh://git@git.housh.dev:2222/hhe/consult-template.git"
+
+# Airflow assessment vars.
+HPA_AIRFLOW_CONFIG_DIR="${XDG_CONFIG_HOME}/aap"
+HPA_AIRFLOW_TEMPLATE_DIR="${HPA_DATA_DIR}/airflow-assessment-template"
+HPA_AIRFLOW_TEMPLATE_URL="ssh://git@git.housh.dev:2222/hhe/airflow-assessment-template.git"
+
+export HPA_AUTO_PULL
+export HPA_AUTO_PULL_INTERVAL
+export HPA_AUTO_PULL_OPTS
+export HPA_CONSULTS_DIR
+export HPA_CONSULT_ORIGIN_BASE_URL
+export HPA_CONSULT_TEMPLATE_DIR
+export HPA_CONSULT_TEMPLATE_URL
+export HPA_CONFIG_DIR
+export HPA_DATA_DIR
+export HPA_DOCKER_IMAGE
+export HPA_DOCKER_TAG
+export HPA_PLAYBOOK_URL
+export HPA_PLAYBOOK_DIR
+export HPA_VAULT_SECRET_KEY
+export HPA_AIRFLOW_CONFIG_DIR
+export HPA_AIRFLOW_TEMPLATE_DIR
+export HPA_AIRFLOW_TEMPLATE_URL

env/.local/scripts/utils/kanatactl/pkg

@@ -1,193 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-set -o nounset
-set -o pipefail
-
-SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
-THIS_FILE=${BASH_SOURCE[0]}
-LOG_LABEL=$(basename "$THIS_FILE")
-THIS=${THIS:-$LOG_LABEL}
-LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
-XDG_CACHE_HOME=${XDG_CACHE_HOME:-$HOME/.cache}
-
-usage() {
-  cat <<EOF
-Manage the kanata package / crate.
-
-USAGE:
-
-  $ $THIS <command> <flags> <args...>
-
-FLAGS:
-  -h | --help:           Show this help page. 
-
-COMMANDS:
-  install:               Install the kanata package.
-  update:                Updates the kanata package.
-
-EOF
-}
-
-kanata_dir="$XDG_CACHE_HOME/kanata"
-kanata_url="https://github.com/jtroo/kanata.git"
-kanata_current_version=""
-
-install_mode="0"
-update_mode="0"
-
-# Logging utility function, use in place of echo.
-log() {
-  logging log --source "$THIS_FILE" "$@"
-}
-
-get_current_version() {
-  if [[ $(command -v /usr/bin/kanata) ]]; then
-    kanata_current_version=$(/usr/bin/kanata --version)
-    # Remove 'kanata ' from output of the version command.
-    kanata_current_version="${kanata_current_version#kanata *}"
-  fi
-}
-
-# Get's kanat versions by git tag and filter's out versions that are less than our
-# current version number.
-get_versions() {
-  get_current_version
-  local rows=()
-  local tag=""
-  local has_seen_current="0"
-  for tag in $(git tag --list 'v*' | sort --version-sort); do
-    if [[ $has_seen_current == "1" ]] || [[ -z $kanata_current_version ]]; then
-      rows+=("$tag\n")
-    elif [[ $tag =~ $kanata_current_version ]]; then
-      has_seen_current="1"
-    fi
-  done
-  echo "$(echo -e "${rows[@]}" | sort --version-sort --reverse | tr -d ' ')"
-}
-
-# Present an fzf menu to choose a version to install / update to.
-prompt_for_version_to_install() {
-  local rows=$(get_versions)
-  if [[ -z $rows ]]; then
-    log --error "No versions to select." && exit 1
-  else
-    echo $(printf '%s\n' "${rows[@]}" | fzf --header='Which version would you like to install?')
-  fi
-}
-
-# Compares the selected version to the installed version.
-compare_versions() {
-  # An example selection at this point: 'v1.9.0'
-  local selection=""
-  read -r selection
-
-  if [[ $(command -v /usr/bin/kanata) ]] && [[ -n $selection ]]; then
-
-    [[ -z $kanata_current_version ]] && get_current_version
-    local selected_version=${selection#v*} # remove the 'v' from selected version.
-
-    log "Comparing selected: '$selected_version' to installed '$kanata_current_version'"
-    if [[ $selected_version == $kanata_current_version ]]; then
-      log --warn "Selected version matches the currently installed version." && exit 1
-    fi
-  fi
-  echo "$selection"
-}
-
-# Check's out the selected version tag and builds the kanata executable.
-build_selection() {
-  # An example selection at this point: 'v1.9.0'
-  local selection=""
-  read -r selection
-
-  if [[ -z $selection ]]; then
-    log --error "Selection is empty." && exit 1
-  # Handle logged messages instead of an actual selection.
-  elif [[ $selection =~ "[WARN]" ]] || [[ $selection =~ "[ERROR]" ]]; then
-    echo $selection && exit 1
-  fi
-
-  if [[ $selection =~ ^v ]]; then
-    log "Building kanata..."
-    # checkout the selected version tag and build.
-    git checkout $selection
-    cargo build --release --features cmd
-    echo "done"
-  fi
-}
-
-# Copies the most recently built kanata executable to the '/usr/bin' directory.
-#
-copy_to_usr_bin() {
-
-  # This is the end of the install / update pipe, so it loops over output of
-  # the other commands in the pipe printing it to the console, while waiting on the
-  # build to be done.
-  while read line; do
-    if [[ $line == "done" ]]; then
-      log "Copying to '/usr/bin/kanata'" && echo "Copying to '/usr/bin/kanata'"
-      sudo cp target/release/kanata /usr/bin
-      echo "Done!"
-    else
-      echo "$line"
-    fi
-  done
-}
-
-title() {
-  if [[ $update_mode == "1" ]]; then
-    echo "Updating"
-  else
-    echo "Installing"
-  fi
-}
-
-# Handles both install or update commands, as they do the same thing.
-install_or_update() {
-  local mode=$(title)
-
-  log "$mode kanata..."
-  local should_pull="1"
-
-  if [[ ! -d $kanata_dir ]]; then
-    log "Cloning repo."
-    should_pull="0"
-    git clone $kanata_url $kanata_dir
-  fi
-
-  pushd $kanata_dir &>/dev/null
-  (
-    [[ $should_pull == "1" ]] && git pull origin main >/dev/null 2>&1
-    prompt_for_version_to_install | compare_versions | build_selection | copy_to_usr_bin
-  )
-  popd &>/dev/null
-}
-
-################################################################################
-# MAIN
-################################################################################
-
-# Setup logging file and label.
-source "$SCRIPTS/hypr/logging"
-setup-logging "$LOG_FILE" "$LOG_LABEL"
-
-while [[ $# -gt 0 ]]; do
-  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
-    usage && exit 0
-  elif [[ $1 == "install" ]]; then
-    shift
-    install_mode="1"
-    install_or_update "$@"
-    exit $?
-  elif [[ $1 == "update" ]]; then
-    shift
-    update_mode="1"
-    install_or_update "$@"
-    exit $?
-  fi
-done
-
-# If we made it here, then none of the commands handled the arguments, so show the
-# usage and exit
-usage && exit 1

env/.local/scripts/utils/kanatactl/service

@@ -11,8 +11,15 @@ THIS=${THIS:-$LOG_LABEL}
 LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 DEV_ENV=${DEV_ENV:-""}
 
+declare user_flag system_flag prompt_flag mode
+declare -a args
+user_flag="1"
+system_flag="0"
+prompt_flag="0"
+mode=""
+
 usage() {
-  cat <<EOF
+	cat <<EOF
 Manages the kanata systemd service.
 
 USAGE:
@@ -21,6 +28,9 @@ USAGE:
 
 FLAGS:
   -h | --help:          Show this help page.
+	--user:								Setup systemd service as a user service (default).
+	--system:							Setup systemd service as a system service.
+	--prompt:							Prompt the user to install service as system or user service.
 
 COMMANDS:
   enable:               Enable the kanata service.
@@ -40,52 +50,90 @@ EOF
 
 # Logging utility function, use in place of echo.
 log() {
-  logging log --source "$THIS_FILE" "$@"
+	logging log --source "$THIS_FILE" "$@"
 }
 
 enable_service() {
-  log "Enabling kanata service..."
-  sudo systemctl enable kanata.service
+	log "Enabling kanata service..."
+	if [[ $user_flag == "1" ]]; then
+		systemctl --user enable --now kanata.service
+	else
+		sudo systemctl enable --now kanata.service
+	fi
 }
 
 get_status() {
-  log "Getting kanata service status..."
-  systemctl status kanata.service
+	log "Getting kanata service status..."
+	systemctl status kanata.service
+}
+
+prompt_user() {
+	log "Prompting user for how they would like to setup kanata systemd service..."
+	local choice
+	choice=$(echo -e "user\nsystem" | fzf --header "How would you like to setup the kanata systemd service?")
+	if [[ $choice == "system" ]]; then
+		user_flag="0"
+		system_flag="1"
+	elif [[ $choice == "user" ]]; then
+		user_flag="1"
+		system_flag="0"
+	else
+		exit 1
+	fi
 }
 
 install_service() {
-  if [[ -z $DEV_ENV ]]; then
-    log --error "DEV_ENV is not set properly." && exit 1
-  fi
+	local service_dir="user"
 
-  # Ensure the configuration is copied / setup otherwise the keyboard may not work.
-  "$SCRIPTS/kanatactl" config install "$@"
+	if [[ -z $DEV_ENV ]]; then
+		log --error "DEV_ENV is not set properly." && exit 1
+	fi
+	log "Starting install service..."
 
-  log "Installing kanata service..."
-  [[ -f /etc/systemd/system/kanata.service ]] && sudo rm -rf /etc/systemd/system/kanata.service
-  sudo cp "$DEV_ENV/env/etc/systemd/system/kanata.service" /etc/systemd/system
-  sudo systemctl daemon-reload
+	# Ensure the configuration is copied / setup otherwise the keyboard may not work.
+	"$SCRIPTS/kanatactl" config install "$@"
+
+	# Prompt the user for how they would like to install the systemd service, if the
+	# prompt flag is set.
+	[[ $prompt_flag == "1" ]] && prompt_user || exit 1
+
+	[[ $system_flag == "1" ]] && service_dir="system"
+
+	log "Installing kanata service as: '$service_dir' service..."
+
+	if [[ $service_dir == "system" ]]; then
+		[[ -f /etc/systemd/system/kanata.service ]] && sudo rm -rf /etc/systemd/system/kanata.service
+		sudo cp "$DEV_ENV/env/etc/systemd/system/kanata.service" /etc/systemd/system
+		sudo systemctl daemon-reload
+		sudo systemctl enable --now kanata.service
+	else
+		[[ -f ~/.config/systemd/user/kanata.service ]] && rm -rf ~/.config/systemd/user/kanata.service
+		mkdir -p ~/.config/systemd/user &>/dev/null
+		cp "$DEV_ENV/env/etc/systemd/user/kanata.service" ~/.config/systemd/user
+		systemctl --user daemon-reload
+		systemctl --user enable --now kanata.service
+	fi
 }
 
 start_service() {
-  log "Starting kanata service..."
-  systemctl start kanata.service
+	log "Starting kanata service..."
+	systemctl start kanata.service
 }
 
 stop_service() {
-  log "Stopping kanata service..."
-  sudo systemctl stop kanata.service
+	log "Stopping kanata service..."
+	sudo systemctl stop kanata.service
 }
 
 disable_service() {
-  log "Disabling kanata service..."
-  stop_service
-  sudo systemctl disable kanata.service
+	log "Disabling kanata service..."
+	stop_service
+	sudo systemctl disable kanata.service
 }
 
 restart_service() {
-  log "Restarting kanata service..."
-  sudo systemctl restart kanata.service
+	log "Restarting kanata service..."
+	sudo systemctl restart kanata.service
 }
 
 ################################################################################
@@ -96,26 +144,42 @@ restart_service() {
 source "$SCRIPTS/hypr/logging"
 setup-logging "$LOG_FILE" "$LOG_LABEL"
 
+# Parse flags / arguments.
 while [[ $# -gt 0 ]]; do
-  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
-    usage && exit 0
-  elif [[ $1 == "disable" ]]; then
-    disable_service && exit $?
-  elif [[ $1 == "enable" ]]; then
-    enable_service && exit $?
-  elif [[ $1 == "install" ]]; then
-    shift
-    install_service "$@" && exit $?
-  elif [[ $1 == "start" ]]; then
-    start_service && exit $?
-  elif [[ $1 == "status" ]]; then
-    get_status && exit $?
-  elif [[ $1 == "stop" ]]; then
-    stop_service && exit $?
-  elif [[ $1 == "restart" ]]; then
-    restart_service && exit $?
-  fi
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "--user" ]]; then
+		user_flag="1"
+	elif [[ $1 == "--system" ]]; then
+		system_flag="1"
+	elif [[ $1 == "--prompt" ]]; then
+		prompt_flag="1"
+	# Set first non-flag to the mode / subcommand.
+	elif [[ -z $mode ]]; then
+		mode="$1"
+	# Add any other arguments to the 'args' array.
+	else
+		args+=("$1")
+	fi
+	shift
 done
 
-# If we made it here, then none of the subcommands handled the args.
-usage && exit 1
+# Handle mode.
+if [[ $mode == "disable" ]]; then
+	disable_service && exit $?
+elif [[ $mode == "enable" ]]; then
+	enable_service && exit $?
+elif [[ $mode == "install" ]]; then
+	install_service "${args[@]}" && exit $?
+elif [[ $mode == "start" ]]; then
+	start_service && exit $?
+elif [[ $mode == "status" ]]; then
+	get_status && exit $?
+elif [[ $mode == "stop" ]]; then
+	stop_service && exit $?
+elif [[ $mode == "restart" ]]; then
+	restart_service && exit $?
+else
+	# If we made it here, then none of the subcommands handled the args.
+	usage && exit 1
+fi

env/.local/scripts/utils/shorten-url/create

@@ -0,0 +1,112 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# Global variables.
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]} && export THIS_FILE # Export for log function to work properly.
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+# Setup environment
+source "$SCRIPTS/utils/shorten-url/env"
+
+# Local variables.
+declare -a tags
+url=""
+shortCode=""
+expire=""
+
+usage() {
+	cat <<EOF
+Create a shortened url, returns / echo's the generated url.
+
+USAGE:
+    $THIS <flags> <url>
+
+FLAGS:
+	-c | --code:            Set a custom short-code for the link.
+	-e | --expire <time>:   Set the expiration for the link.
+	-t | --tag <tag>:       Add tag(s) to the link (can be passed multiple times).
+	-h | --help:            Show this help page.
+
+EXMAPLES:
+
+  Generate a link and set the expiration for 30 days from now:
+    $ $THIS --expire 30 days https://example.com
+
+  Generate a link with multiple tags:
+    $ $THIS --tag consult --tag test https://example.com
+
+EOF
+}
+
+generate_json() {
+	local tagsJson
+	tagsJson=$(printf '%s\n' "${tags[@]}" | jq -R . | jq -s .)
+	log "Generating json data..."
+	if [[ -n $expire ]]; then
+		expire="$(date --iso-8601=seconds -d "+ $expire")"
+		log "Set valid until date: $expire"
+		# NB: 'validUntil' can not be set to an empty string, or it immediately expires the link.
+		jq -n --arg longUrl "$url" --arg shortCode "$shortCode" --argjson tags "$tagsJson" \
+			--arg validUntil "$expire" \
+			'{longUrl: $longUrl, shortCode: $shortCode, tags: $tags, findIfExists: true, validUntil: $validUntil}'
+	else
+		jq -n --arg longUrl "$url" --arg shortCode "$shortCode" --argjson tags "$tagsJson" \
+			'{longUrl: $longUrl, customSlug: $shortCode, tags: $tags, findIfExists: true}'
+	fi
+}
+
+create_url() {
+	local json
+
+	[[ -z $url ]] &&
+		log --error "Url not supplied." &&
+		exit 1
+
+	json="$(generate_json)"
+
+	log "Creating url: '$url' with json: $json"
+
+	curl "$BASE_URL/short-urls" \
+		--request 'POST' \
+		--header 'Content-Type: application/json' \
+		--header 'accept: application/json' \
+		--header "X-Api-Key: $API_KEY" \
+		--no-progress-meter \
+		--data "$json" | jq '.shortUrl'
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+log "Creating url with args: $*"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-c" ]] || [[ $1 == "--code" ]]; then
+		shift
+		shortCode="$1"
+	elif [[ $1 == "-t" ]] || [[ $1 == "--tag" ]]; then
+		shift
+		tags+=("$1")
+	elif [[ $1 == "-e" ]] || [[ $1 == "--expire" ]]; then
+		shift
+		expire="$1 $2"
+		shift
+	else
+		url="$1"
+	fi
+	shift
+done
+
+create_url

env/.local/scripts/utils/shorten-url/env

@@ -0,0 +1,7 @@
+#!/usr/bin/env bash
+
+API_KEY=$(/bin/gopass show --password Keys/shlink/api-key)
+BASE_URL="https://l.housh.dev/rest/v3"
+
+export API_KEY
+export BASE_URL

env/.local/scripts/utils/shorten-url/logs

@@ -0,0 +1,64 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]} && export THIS_FILE
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+rm_flag="0"
+
+usage() {
+	cat <<EOF
+View or remove the logs.
+
+USAGE:
+  $THIS <flags> <command>
+
+FLAGS:
+	-h | --help:     Show this help page.
+
+COMMAND:
+	show:            Show the logs (default).
+	rm | remove:     Remove the log file.
+
+EOF
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+[[ -z ${LOG_DIR:-""} ]] &&
+	log --error "Log directory not set." &&
+	exit 1
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "rm" ]] || [[ $1 == "remove" ]]; then
+		rm_flag="1"
+	elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	fi
+	shift
+done
+
+file="$LOG_DIR/$LOG_FILE"
+
+[[ ! -f "$file" ]] &&
+	echo "No log file at: '$file'" &&
+	exit 0
+
+if [[ $rm_flag == "1" ]]; then
+	log --echo "Removing logs..."
+	rm -f "$file"
+else
+	log "Showing logs"
+	bat "$file"
+fi

env/.markdownlint.jsonc

@@ -0,0 +1,8 @@
+{
+  "default": true,
+  "MD013": {
+    "line_length": 120,
+    "code_blocks": false,
+    "tables": false,
+  },
+}

env/.prettierrc

@@ -0,0 +1,4 @@
+{
+  "proseWrap": "always"
+  "printWidth": 100
+}

env/.tmux.conf

@@ -14,7 +14,7 @@ TMUX_FZF_OPTIONS="-p -w 60% -h 80% -m"
 set-option -sa terminal-overrides ",xterm*:Tc"
 
 # Change the default $TERM to tmux-256color
-set -g default-terminal "xterm-256color"
+set -g default-terminal "tmux-256color"
 
 # Change windows to start with an index of 1 instead of 0
 set -g base-index 1
@@ -120,7 +120,6 @@ set -ga status-right "#[bg=#{@thm_bg},fg=#{@thm_blue}]  #{=/-32/...:#{s|$USER
 set -ga status-right "#[bg=#{@thm_bg},fg=#{@thm_overlay_0},none]#{?window_zoomed_flag,│,}"
 set -ga status-right "#[bg=#{@thm_bg},fg=#{@thm_yellow}]#{?window_zoomed_flag,  zoom ,}"
 
-
 # bootstrap tpm
 if "test ! -d ~/.tmux/plugins/tpm" \
    "run 'git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm && ~/.tmux/plugins/tpm/bin/install_plugins'"

env/.zshenv

@@ -19,9 +19,6 @@ export VISUAL=nvim
 export EDITOR_PREFIX=nvim
 export MANPAGER="bat"
 export BROWSER="brave"
-#export VIMINIT='source $MYVIMRC'
-#export MYVIMRC="$HOME/.vim/vimrc"
-#export NVIM_APPNAME="m-housh"
 
 # Git
 export GITUSER="m-housh"
@@ -36,6 +33,8 @@ export LOCAL_ENV="$XDG_DATA_HOME/zsh/env.zsh"
 export MYZSHRC="$ZDOTDIR/.zshrc"
 export SCRIPTS="$HOME/.local/scripts"
 export SKELETONDIR="$DOTFILES/skeleton"
+export REPOS="$HOME/dev"
+export WORK="$HOME/work"
 
 # NPM
 export NPM_CONFIG_CACHE="$XDG_DATA_HOME/npm"
@@ -64,14 +63,16 @@ export PSQL_HISTORY="$XDG_DATA_HOME/psql_history"
 # Hashicorp/Vault
 export VAULT_ADDR="https://vault.housh.dev"
 
+# RipGrep
+export RIPGREP_CONFIG_PATH="$HOME/.config/ripgrep/ripgreprc"
+
 # Rust
 export CARGO_HOME="$XDG_DATA_HOME/cargo"
 
 # Tmux-Sessionator path.
-export TMUX_SESSIONATOR_PATH="$HOME:$SCRIPTS:$HOME/.config/personal:$HOME/dev:$HOME/dev/homelab/utils:$HOME/dev/homelab/services"
+export TMUX_SESSIONATOR_PATH="$HOME:$SCRIPTS:$HOME/.config:$HOME/.config/personal:$REPOS:$REPOS/homelab/utils:$REPOS/homelab/services:$WORK/consults:$WORK"
 
 # Password-store
-# export PASSWORD_STORE_DIR="$XDG_DATA_HOME/gopass/stores/root"
 export PASSWORD_STORE_GENERATED_LENGTH=40
 export PASSWORD_STORE_ENABLE_EXTENSIONS=true
 
@@ -86,5 +87,8 @@ export STARSHIP_CONFIG="$XDG_CONFIG_HOME/starship/starship.toml"
 export _ZO_DATA_DIR="$XDG_DATA_HOME"
 unset _ZO_ECHO
 
+# Suppress swift backtrace warnings.
+export SWIFT_BACTRACE=enable=no
+
 [ -f "$LOCAL_ENV" ] && source "$LOCAL_ENV"
 [ -f "$ZDOTDIR/personal.env" ] && source "$ZDOTDIR/personal.env"

env/etc/systemd/user/kanata.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=Kanata Service
+Documentation=https://github.com/jtroo/kanata
+
+[Service]
+Environment=PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/bin
+Type=simple
+ExecStart=/bin/sh -c 'exec /usr/bin/kanata --cfg /home/michael/.config/kanata/config.kbd'
+Restart=no
+
+[Install]
+WantedBy=default.target

env/jellyfin-tui/config.gpg

@@ -0,0 +1,11 @@
+-----BEGIN PGP MESSAGE-----
+
+hF4DAAAAAAAAAAASAQdATOWmZnUO2KsVWqDMIPkJPBvEskExyaYdpYxcl4xqwyUw
+8rPCTjCdJSbB36d7ly5+UaayXBZFn2IrGXfai7+IP11G92ocj4a8xHSwKZX9mSd8
+0sABAVlTrLOO4BVWBpGnAsagfzXMGyYPi843KdnZg43b4IAx3hdR46NnjfjGjAZc
+Ggf4kC+DuTT+Y0BRH8qRLU6kizxRvi13GEnxt0sTQqhNRA+hLbkXYWlZ3fLnf6YD
+CIpMYowZmqwd6KH3ofFeNr+E5+HAaygU/61VH2pkZRzwwltiEZ4aQ+eWULELs6BF
+z7nIB49nOZi2m7boSVVnfmknD6Z/QwZSmqakySZRlNNC19IqEoDl02H5cgHCNbQV
+cTnyHQ==
+=LRvL
+-----END PGP MESSAGE-----