feat: Integrates logging into scripts that need it.

env/.local/scripts/hypr/close-windows

@@ -1,12 +1,15 @@
 #!/usr/bin/env bash
 
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
+
 usage() {
   cat <<EOF
 
 Close window(s) by address or pattern mode.
 
 USAGE:
-  $ $(basename ${BASH_SOURCE[0]}) [OPTIONS] [MODE] [ARG...]
+  $ $THIS [OPTIONS] [MODE] [ARG...]
 
 MODE:
   --all:                      Close all windows in all workspaces, any arguments are ignored.
@@ -41,6 +44,7 @@ dry_run_flag="0"
 special_flag="0"
 args=()
 addresses=()
+SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^-a ]] || [[ $1 =~ ^--active-workspace ]]; then
@@ -62,11 +66,7 @@ while [[ $# -gt 0 ]]; do
 done
 
 log() {
-  if [[ $dry_run_flag == "1" ]]; then
-    echo "[DRY RUN]: $1"
-  else
-    echo "$1"
-  fi
+  logging log --source "$THIS_FILE" "$@"
 }
 
 _select_addresses() {
@@ -92,10 +92,15 @@ get_special_addresses() {
 close() {
   log "Closing window address: $1"
   if [[ $dry_run_flag == "0" ]]; then
-    hyprctl dispatch closewindow "address:$1"
+    hyprctl dispatch closewindow "address:$1" >/dev/null 2>&1
   fi
 }
 
+# Setup logging file and label
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+export LOG_ENABLE_DRY_RUN="$dry_run_flag"
+
 if [[ $active_workspace_flag == "1" ]]; then
   # Set addresses to active workspace windows.
   id=$(hyprctl activeworkspace -j | jq -r '.id')
@@ -123,7 +128,7 @@ else
 fi
 
 if [[ ${#addresses} == 0 ]]; then
-  log "No windows found."
+  log --warning "No windows found."
   exit 0
 fi
 

env/.local/scripts/hypr/install-webapp

@@ -2,7 +2,8 @@
 
 # Adapted from https://github.com/basecamp/omarchy/tree/master?tab=readme-ov-file
 
-THIS=$(basename ${BASH_SOURCE[0]})
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
 
 function usage() {
   cat <<EOF
@@ -88,21 +89,9 @@ launch_flag="0"
 interactive_flag="0" # This is an internal flag, to not log some things when launch is used.
 interactive_mode=false
 no_interactive_flag="0"
-SCRIPTS="${SCRIPTS}"
+SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 XDG_DATA_HOME=${XDG_DATA_HOME}
 
-if [[ -z "$SCRIPTS" ]]; then
-  echo "SCRIPTS not set"
-  echo "using ~/.local/scripts"
-  SCRIPTS=$HOME/.local/scripts
-fi
-
-if [[ -z "$XDG_DATA_HOME" ]]; then
-  echo "XDG_DATA_HOME not set"
-  echo "using ~/.local/share"
-  XDG_DATA_HOME=$HOME/.local/share
-fi
-
 while [[ $# -gt 0 ]]; do
   if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
     usage && exit 0
@@ -138,15 +127,7 @@ while [[ $# -gt 0 ]]; do
 done
 
 log() {
-  if [[ $dry_run == "1" ]]; then
-    echo -e "\e[34m[DRY_RUN]=>\e[0m $1"
-  else
-    echo -e "$1"
-  fi
-}
-
-log_error() {
-  log "\e[31m[ERROR]:\e[0m $1"
+  logging log --source "$THIS_FILE" "$@"
 }
 
 launch() {
@@ -164,7 +145,7 @@ check_properties() {
 
 load_from_file() {
   if [[ ! -f $1 ]]; then
-    log_error "File '$1' is not found or readable." && exit 1
+    log --error "File '$1' is not found or readable." && exit 1
   fi
   file=$(cat $1)
   app_name=$(echo $file | jq -r '.name // ""')
@@ -213,7 +194,7 @@ set_icon_ref() {
       if curl -sL -o "$icon_path" "$icon_ref"; then
         icon_path="$icon_dir/$app_name.png"
       else
-        log_error "Failed to download icon." && exit 1
+        log --error "Failed to download icon." && exit 1
       fi
     fi
   else
@@ -254,6 +235,17 @@ EOF
 # MAIN
 ################################################################################
 
+# Setup logging file and label
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+export LOG_ENABLE_DRY_RUN="$dry_run"
+
+if [[ -z "$XDG_DATA_HOME" ]]; then
+  log "XDG_DATA_HOME not set"
+  log "using ~/.local/share"
+  XDG_DATA_HOME=$HOME/.local/share
+fi
+
 if [[ $launch_flag == "1" ]]; then
   launch && exit 0
 fi
@@ -268,7 +260,7 @@ if [[ "$?" == "1" ]]; then
 
   # Check if the '--no-interactive' flag was passed and exit with error.
   [[ $no_interactive_flag == "1" ]] &&
-    log_error "Required properties not set and '--no-interactive' flag was passed." &&
+    log --error "Required properties not set and '--no-interactive' flag was passed." &&
     exit 1
 
   # Only log this if not in interactive mode.
@@ -281,7 +273,7 @@ if [[ "$?" == "1" ]]; then
   check_properties
   if [[ "$?" == "1" ]]; then
     # Exit if they were not set during interactive mode.
-    log_error "You must set app name, app URL, and icon URL!" && exit 1
+    log --error "You must set app name, app URL, and icon URL!" && exit 1
   fi
 
   # Set flag that we are in interactive mode.

env/.local/scripts/hypr/launch

@@ -1,5 +1,8 @@
 #!/usr/bin/env bash
 
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
+
 usage() {
   cat <<EOF
 
@@ -10,7 +13,7 @@ This is used in keybinds and by other scripts as a general entrypoint for managi
 
 USAGE:
 
-  $ $(basename ${BASH_SOURCE[0]}) [OPTIONS] PATTERN [LAUNCH_CMD...]
+  $ $THIS [OPTIONS] PATTERN [LAUNCH_CMD...]
 
 OPTIONS:
 
@@ -47,6 +50,7 @@ launch_cmd=()
 pattern=""
 special_flag="0"
 special=""
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 == "-c" ]] || [[ $1 == "--or-close" ]]; then
@@ -77,17 +81,26 @@ while [[ $# -gt 0 ]]; do
   shift
 done
 
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+# Redirects all output of hyprctl dispatch commands.
+hypr_dispatch() {
+  hyprctl dispatch "$@" >/dev/null 2>&1
+}
+
 toggle_special() {
   if [[ -z $special ]]; then
-    echo "[ERROR]: No name supplied for special workspace."
+    log --error " No name supplied for special workspace."
     exit 1
   fi
-  hyprctl dispatch togglespecialworkspace $special
+  hypr_dispatch togglespecialworkspace $special
 }
 
 launch_application() {
-  echo "Launching..."
-  echo "'${launch_cmd[@]}'"
+  log "Launching..."
+  log "'${launch_cmd[@]}'"
   eval exec ${launch_cmd[@]}
 }
 
@@ -95,15 +108,19 @@ launch_application() {
 # MAIN
 ################################################################################
 
+# Setup logging file and label
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+
 if [[ -z $pattern ]]; then
-  echo "[ERROR]: Must supply a pattern to match the window class."
+  log --error "Must supply a pattern to match the window class."
   usage && exit 1
 elif [[ -z $launch_cmd ]]; then
-  echo "[ERROR]: Must supply a launch command to match the window class."
+  log --error "Must supply a launch command to match the window class."
   usage && exit 1
 fi
 
-echo "Pattern: $pattern"
+log "Pattern: $pattern"
 addresses=$(hyprctl clients -j | jq ".[] | select(.class | contains(\"$pattern\")) | .address")
 
 # If no addresses, then launch the application.
@@ -127,14 +144,14 @@ fi
 # Check if both close and focus flags were passed, so we don't do the
 # wrong thing.
 if [[ $focus_flag == "1" ]] && [[ $close_flag == "1" ]]; then
-  echo "[ERROR]: Both focus and close flag were passed."
+  log --error "Both focus and close flag were passed."
   exit 1
 fi
 
 for address in ${addresses[@]}; do
   # Clean the address of quotes.
   address=${address//\"/}
-  echo "Handling address: '$address'"
+  log "Handling address: '$address'"
 
   if [[ $focus_active_only_flag == "1" ]] || [[ $close_active_only_flag == "1" ]]; then
     # get the workspace name for the address.
@@ -142,19 +159,19 @@ for address in ${addresses[@]}; do
 
     # check that the window is on the active workspace.
     if [[ $active_window_workspace == $workspace ]]; then
-      echo "Performing action: '$action', on window: '$address'"
-      hyprctl dispatch $action "address:$address"
+      log "Performing action: '$action', on window: '$address'"
+      hypr_dispatch $action "address:$address"
       # early out if focusing a window.
       [[ $focus_active_only_flag ]] && exit 0
     else
       # the window is not on the active workspace, so skip it.
-      echo "Skipping window: $address"
+      log "Skipping window: $address"
     fi
   else
     # We don't have the focus_active_only_flag or close_active_only_flag set, so we perform
     # the action on the window.
-    echo "Performing action: '$action', on window: '$address'"
-    hyprctl dispatch $action "address:$address"
+    log "Performing action: '$action', on window: '$address'"
+    hypr_dispatch $action "address:$address"
   fi
 done
 

env/.local/scripts/hypr/launch-webapp

@@ -1,6 +1,8 @@
-# /usr/bin/env bash
+#! /usr/bin/env bash
 
 # Adapted from https://github.com/basecamp/omarchy/tree/master?tab=readme-ov-file
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
 
 usage() {
   cat <<EOF
@@ -10,7 +12,7 @@ essentially just generates the pattern and launch command to pass into that scri
 
 USAGE:
 
-  $ launch-webapp [OPTIONS] <url> [ARGS...]
+  $ $THIS [OPTIONS] <url> [ARGS...]
 
 OPTIONS:
 
@@ -43,13 +45,7 @@ browser="chromium.desktop"
 url=""
 launch_args=()
 app_args=""
-SCRIPTS="${SCRIPTS}"
-
-if [[ -z $SCRIPTS ]]; then
-  echo "scripts directory not set"
-  echo "using ~/.local/scripts"
-  SCRIPTS=~/.local/scripts
-fi
+SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^--special ]] || [[ $1 =~ ^-s ]]; then
@@ -77,20 +73,28 @@ pattern() {
   echo $pattern
 }
 
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
 ##################################################
 # MAIN
 ##################################################
 
+# setup logging file and label
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+
 if [[ -z $url ]]; then
-  echo "[ERROR]: Must supply a url." && usage && exit 1
+  log --error "Must supply a url." && usage && exit 1
 fi
 
 # Any left over args after "--"
 app_args="$@"
 
-echo "URL: $url"
-echo "Launch args: ${launch_args[@]}"
-echo "App args: ${app_args}"
+log "URL: $url"
+log "Launch args: ${launch_args[@]}"
+log "App args: ${app_args}"
 
 $SCRIPTS/hypr/launch "${launch_args[@]}" "$(pattern)" \
   setsid uwsm app -- $(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$browser 2>/dev/null | head -1) --app="$url" "$app_args"

env/.local/scripts/hypr/logging

@@ -31,6 +31,9 @@
 LOG_FILE=(${LOG_FILE:-})
 LOG_INVOCATION_ID=${LOG_INVOCATION_ID:-}
 LOG_LABEL=(${LOG_LABEL:-})
+# Run in dry run mode, which just prints to the console and does
+# not log to the files.
+LOG_ENABLE_DRY_RUN=${LOG_ENABLE_DRY_RUN:-"0"}
 SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 warn_flag="0"
@@ -96,17 +99,23 @@ logging() {
     exit 1
   fi
 
-  msg=""
-  # Loop over log files logging message to each file.
-  for i in "${!LOG_FILE[@]}"; do
-    prefix="[id: $LOG_INVOCATION_ID][time: $($SCRIPTS/isosec)][label: ${LOG_LABEL[i]}][source: $source_file] : "
-    msg="$prefix $(__msg ${args[@]})"
-    echo "$msg" >>${LOG_FILE[i]}
-  done
+  msg="$(__msg ${args[@]})"
 
-  # Also log errors and warning messages to the console.
-  if [[ $error_flag == "1" ]] || [[ $warn_flag == "1" ]]; then
-    echo "${msg##* : }"
+  if [[ $LOG_ENABLE_DRY_RUN == "0" ]]; then
+    # Loop over log files logging message to each file.
+    for i in "${!LOG_FILE[@]}"; do
+      prefix="[id: $LOG_INVOCATION_ID][time: $($SCRIPTS/isosec)][label: ${LOG_LABEL[i]}][source: $source_file] : "
+      m="$prefix $msg"
+      echo -e "$m" >>${LOG_FILE[i]}
+    done
+
+    # Also log errors and warning messages to the console.
+    if [[ $error_flag == "1" ]] || [[ $warn_flag == "1" ]]; then
+      echo -e "$msg"
+    fi
+  else
+    # Dry run mode, so just log to the console
+    echo -e "\e[34m[DRY RUN]:\e[0m $msg"
   fi
 }
 

env/.local/scripts/hypr/switch-to-workspace

@@ -1,5 +1,8 @@
 #!/usr/bin/env bash
 
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
+
 usage() {
   cat <<EOF
 
@@ -12,7 +15,7 @@ the workspace.
 
 USAGE:
 
-  $ $(basename ${BASH_SOURCE[0]}) [OPTIONS] <workspace>
+  $ $THIS [OPTIONS] <workspace>
 
 OPTIONS:
 
@@ -23,6 +26,7 @@ EOF
 
 target_workspace=""
 active_workspace=$(hyprctl activewindow -j | jq -r '.workspace.name')
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^-h ]] || [[ $1 =~ ^--help ]]; then
@@ -33,15 +37,22 @@ while [[ $# -gt 0 ]]; do
   shift
 done
 
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+
 if [[ -z target_workspace ]]; then
-  echo "[ERROR]: Must supply a workpsace to switch to."
+  log --error "Must supply a workpsace to switch to."
   usage && exit 1
 fi
 
 # If active window is on a special workspace, then toggle the special workspace off.
 if [[ $active_workspace =~ ^special ]]; then
-  echo "Toggling special workspace: '$active_workspace'"
-  hyprctl dispatch togglespecialworkspace ${active_workspace#special:}
+  log "Toggling special workspace: '$active_workspace'"
+  hyprctl dispatch togglespecialworkspace ${active_workspace#special:} >/dev/null 2>&1
 
   # Only toggle the special workspace if trying to switch to previous and we're currently
   # on a special workspace.
@@ -50,5 +61,5 @@ if [[ $active_workspace =~ ^special ]]; then
   fi
 fi
 
-echo "Switching to workspace: $target_workspace"
-hyprctl dispatch workspace $target_workspace
+log "Switching to workspace: $target_workspace"
+hyprctl dispatch workspace $target_workspace >/dev/null 2>&1

env/.local/scripts/hypr/uninstall-desktop-app

@@ -1,10 +1,7 @@
 #!/usr/bin/env bash
 
-# Uninstalls '.desktop' applications, including their icon.
-#
-# This is primarily used for uninstalling web app's, if a
-# desktop app was installed via the package manager, then the
-# package manager should be used to uninstall the application.
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename "$THIS_FILE")
 
 usage() {
   cat <<EOF
@@ -15,11 +12,12 @@ package manager, then it should be used to uninstall the application.
 
 Usage:
 
-  uninstall-desktop-app [OPTIONS] [FILE...]
+  $ $THIS [OPTIONS] [FILE...]
 
-  OPTIONS:
-    --dry-run:    Perform but don't actually remove anything.
-    -h | --help:  Show the help page.
+OPTIONS:
+
+  --dry-run:    Perform but don't actually remove anything.
+  -h | --help:  Show the help page.
 
 If no files are supplied, then an interactive session will be
 started that allows you to choose the applications to remove.
@@ -32,27 +30,31 @@ interactive_mode="0"
 dry_run="0"
 help_flag="0"
 XDG_DATA_HOME=${XDG_DATA_HOME}
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^--dry ]]; then
     dry_run="1"
   elif [[ $1 =~ ^-h ]] || [[ $1 =~ ^--h ]]; then
-    help_flag="1"
+    usage && exit 0
   else
     files+=("$1")
   fi
   shift
 done
 
-# Early out for help option.
-if [[ $help_flag == "1" ]]; then
-  usage
-  exit 0
-fi
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+############################## MAIN ##############################
+
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
 
 if [[ -z $XDG_DATA_HOME ]]; then
-  echo "xdg data home is not set"
-  echo "using: ~/.local/share"
+  log "xdg data home is not set"
+  log "using: ~/.local/share"
   XDG_DATA_HOME=$HOME/.local/share
 fi
 
@@ -65,16 +67,6 @@ if [[ ${#files} == 0 ]]; then
   )
 fi
 
-log() {
-  if [[ $dry_run == "1" ]]; then
-    echo "[DRY RUN]: $1"
-  else
-    echo "$1"
-  fi
-}
-
-############################## MAIN ##############################
-
 for f in ${files[@]}; do
 
   icon=""

env/.local/scripts/hypr/utils-launcher

@@ -1,6 +1,7 @@
 #!/usr/bin/env bash
 
-THIS=$(basename ${BASH_SOURCE[0]})
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename $THIS_FILE)
 
 usage() {
   cat <<EOF
@@ -27,7 +28,6 @@ launch_flag="0"
 
 rows=()
 invocation_id=${RANDOM}
-LOG_FILE=${LOG_FILE:-/tmp/$THIS.log}
 XDG_CONFIG_HOME=${XDG_CONFIG_HOME}
 SCRIPTS=${SCRIPTS}
 
@@ -42,15 +42,9 @@ while [[ $# -gt 0 ]]; do
 done
 
 log() {
-  echo "[$invocation_id]:[$($SCRIPTS/isosec)]:[$THIS]: $1" >>$LOG_FILE
+  logging log --source "$THIS_FILE" "$@"
 }
 
-if [[ -z $XDG_CONFIG_HOME ]]; then
-  log "XDG_CONFIG_HOME not set"
-  log "using ~/.config"
-  XDG_CONFIG_HOME=$HOME/.config
-fi
-
 launch() {
   ghostty --class=$window_class --window-padding-x=$window_padding_x \
     --keybind="ctrl+c=quit" \
@@ -81,6 +75,16 @@ generate_rows() {
 # MAIN
 ################################################################################
 
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+
+if [[ -z $XDG_CONFIG_HOME ]]; then
+  log "XDG_CONFIG_HOME not set"
+  log "using ~/.config"
+  XDG_CONFIG_HOME=$HOME/.config
+fi
+
 if [[ -z $config_file ]]; then
   log "No config file set."
   log "Using ~/.config/utils-launcher/config.json"

env/.local/scripts/hypr/waybarctl

@@ -1,6 +1,7 @@
 #!/usr/bin/env bash
 
-THIS=$(basename ${BASH_SOURCE[0]})
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename $THIS_FILE)
 
 usage() {
   cat <<EOF

env/.local/scripts/hypr/window-picker

@@ -24,7 +24,7 @@ uses_supplied_footer="0"
 fzf_opts=()
 rows=()
 window_data=$(hyprctl clients -j | jq 'sort_by(.workspace.id)')
-SCRIPTS=${SCRIPTS}
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^--footer ]]; then
@@ -36,10 +36,6 @@ while [[ $# -gt 0 ]]; do
   shift
 done
 
-if [[ -z $SCRIPTS ]]; then
-  SCRIPTS=$HOME/.local/scripts
-fi
-
 footer() {
   cat <<'EOF'
  _      ___         __             

env/.local/scripts/hypr/window-table

@@ -1,5 +1,8 @@
 #!/usr/bin/env bash
 
+THIS_FILE=${BASH_SOURCE[0]}
+THIS=$(basename $THIS_FILE)
+
 usage() {
   cat <<EOF
 
@@ -9,7 +12,7 @@ There are no required options for this script to work.
 
 USAGE:
 
-  $ $(basename ${BASH_SOURCE[0]}) [OPTIONS]
+  $ $THIS [OPTIONS]
 
 OPTIONS:
 
@@ -50,7 +53,7 @@ show_window_class_flag="0"
 launch_args=()
 selected_value=""
 
-SCRIPTS=${SCRIPTS}
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
   if [[ $launch_flag == "1" ]]; then
@@ -93,6 +96,10 @@ action_footer() {
 EOF
 }
 
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
 show_table_return_choice() {
   local opts=()
   if [[ $show_window_class_flag == "1" ]]; then
@@ -115,7 +122,7 @@ ask_what_to_do_with_selection() {
     printf "%s\n" "${choices[@]}" |
       fzf --style=full --footer="$(action_footer)" --header="What should we do with the selected window?"
   )
-  echo "Choice: $choice"
+  log "Choice: $choice"
   if [[ $choice == "Quit" ]]; then
     exit 0
   elif [[ $choice == "Close window" ]]; then
@@ -135,6 +142,12 @@ ask_what_to_do_with_selection() {
   fi
 }
 
+# Prevent hyprctl dispatch calls from printing to the console.
+hypr_dispatch() {
+  hyprctl dispatch "$@" >/dev/null 2>&1
+  return $?
+}
+
 move_to_workspace() {
   local workspace_id=""
 
@@ -146,7 +159,7 @@ move_to_workspace() {
   fi
 
   if [[ -z $move_to_workspace_name ]]; then
-    echo "[ERROR]: No workspace set to move window to."
+    log --error "No workspace set to move window to."
     exit 1
   fi
 
@@ -158,7 +171,7 @@ move_to_workspace() {
   fi
 
   if [[ -z $workspace_id ]]; then
-    echo "[ERROR]: No workspace id found for: '$move_to_workspace_name'"
+    log --error "No workspace id found for: '$move_to_workspace_name'"
     exit 1
   fi
 
@@ -167,37 +180,41 @@ move_to_workspace() {
     action="movetoworkspacesilent"
   fi
 
-  echo "Moving window: '$selected_value' to workspace: '$workspace_id'"
-  hyprctl dispatch $action "$workspace_id,address:$selected_value"
+  log "Moving window: '$selected_value' to workspace: '$workspace_id'"
+  hypr_dispatch $action "$workspace_id,address:$selected_value"
 }
 
 handle_selected_value() {
   if [[ $ignore_flag == "1" ]]; then
-    echo "Ignore flag set, selection: '$selected_value'"
+    log "Ignore flag set, selection: '$selected_value'"
     exit 0
   elif [[ $clipboard_flag == "1" ]]; then
-    echo "Copying to clipboard, selection: $selected_value"
+    log "Copying to clipboard, selection: $selected_value"
     wl-copy $selected_value
     exit 0
   elif [[ $focus_flag == "1" ]]; then
-    echo "Focusing window, selection: $selected_value"
-    hyprctl dispatch focuswindow "address:$selected_value"
+    log "Focusing window, selection: $selected_value"
+    hypr_dispatch focuswindow "address:$selected_value"
     exit 0
   elif [[ $close_flag == "1" ]]; then
-    echo "Closing window, selection: $selected_value"
-    hyprctl dispatch closewindow "address:$selected_value"
+    log "Closing window, selection: $selected_value"
+    hypr_dispatch closewindow "address:$selected_value"
     exit 0
   elif [[ $move_flag == "1" ]] || [[ $move_silent_flag == "1" ]]; then
     move_to_workspace && exit 0
   fi
   # TODO: Choose from list of what to do with the selected_value.
-  echo "No flag set, selection: '$selected_value'"
+  log "No flag set, selection: '$selected_value'"
 }
 
 ##################################################
 # MAIN
 ##################################################
 
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "/tmp/$THIS.log" "$THIS"
+
 if [[ $launch_flag == "1" ]]; then
   ghostty --class="$window_class" --window-padding-x="$window_padding_x" \
     --keybind="ctrl+c=quit" \
@@ -214,11 +231,11 @@ else
     handle_selected_value
     # If we got here then no flag was passed in initially on how to handle the
     # selected window, so ask what they'd like to do.  Then handle it.
-    echo "Asking what to do with selction."
+    log "Asking what to do with selction."
     ask_what_to_do_with_selection
 
     [[ -n $selected_value ]] && handle_selected_value
     # If you make it here, We just give up... Don't start an endless loop.
-    echo "Giving up without a selection."
+    log "Giving up without a selection."
   fi
 fi