feat: Updates nvim config.

* feat: Update kanata voyager keyboard number layer to include modifier
keys on the homerow of my left hand, so that I can use modifier +number
keybinds.

* feat: Updates starship prompt.

.gitmodules

@@ -0,0 +1,6 @@
+[submodule "mail"]
+	path = mail
+	url = ssh://git@git.housh.dev:2222/michael/mail.git
+[submodule "env/.config/nvim"]
+	path = env/.config/nvim
+	url = https://github.com/m-housh/mhoush.nvim.git

.prettierrc

@@ -0,0 +1,4 @@
+{
+  "proseWrap": "always"
+  "printWidth": 100
+}

.prettierrc.yaml

@@ -1,2 +0,0 @@
-proseWrap: always
-printWidth: 80

README.md

@@ -1,20 +1,16 @@
 # My Dotfiles
 
-This is a repository for my dotfiles. Be warned that these may often change and
-that the installation documentation may not always be correct as things
-progress.  In general the setup process is something that is only done when
-a new machine is purchased or I feel like testing in a virtual machine (which
-does not happen often).  It is helpful to have an understanding of what these
-commands do on your own.
+This is a repository for my dotfiles. Be warned that these may often change and that the installation documentation may
+not always be correct as things progress. In general the setup process is something that is only done when a new machine
+is purchased or I feel like testing in a virtual machine (which does not happen often). It is helpful to have an
+understanding of what these commands do on your own.
 
-In general no pull-requests or changes will be accepted, however you can
-generate an issue if you find a problem.
+In general no pull-requests or changes will be accepted, however you can generate an issue if you find a problem.
 
 It currently will install homebrew and the following homebrew formula.
 
-Most of the functionality is contained in the
-[dots](https://github.com/m-housh/dots) project, that is a companion to manage
-the dotfiles, which expects the dotfiles directory to be at `~/.dotfiles`.
+Most of the functionality is contained in the [dots](https://github.com/m-housh/dots) project, that is a companion to
+manage the dotfiles, which expects the dotfiles directory to be at `~/.dotfiles`.
 
 ```
 fd
@@ -78,15 +74,14 @@ On a fresh system run the following command from the dotfiles root.
 make bootstrap
 ```
 
-This start by installing homebrew, then install the required homebrew formulas and casks.  Next it will use
-`gnu-stow` to symlink configuration files to the appropriate locations.  And finally, it will download
-applications from the `App Store`.  When the bootstrap command is done it will open up the `~/Downloads` folder
-for the few applications that get downloaded from the internet, so that you can finish the installation of those applications.
+This start by installing homebrew, then install the required homebrew formulas and casks. Next it will use `gnu-stow` to
+symlink configuration files to the appropriate locations. And finally, it will download applications from the
+`App Store`. When the bootstrap command is done it will open up the `~/Downloads` folder for the few applications that
+get downloaded from the internet, so that you can finish the installation of those applications.
 
 ### Minimal Setup
 
-If you would like to just setup minimal stuff, link dotfiles, and install brews.
-Then you can run the following command.
+If you would like to just setup minimal stuff, link dotfiles, and install brews. Then you can run the following command.
 
 ```bash
 make bootstrap-minimal
@@ -100,14 +95,13 @@ source scripts/setup_defaults
 
 ## Post Installation
 
-After everything has finished up, you will be able to open `iTerm2` and load
-the profile which should now be symlinked to `~/.config/macOS/iterm/profile.json`
+After everything has finished up, you will be able to open `iTerm2` and load the profile which should now be symlinked
+to `~/.config/macOS/iterm/profile.json`
 
 ## Make commands
 
-It is also possible to not do the full bootstrapping.  If you would only like
-to install homebrew (without any formula or casks) then you can run the following
-command.
+It is also possible to not do the full bootstrapping. If you would only like to install homebrew (without any formula or
+casks) then you can run the following command.
 
 ```
 make bootstrap-homebrew
@@ -115,13 +109,12 @@ make bootstrap-homebrew
 
 ## Other Make Commands
 
-If you would like to setup any specific `zsh` configuration that is only for
-the local machine then you can run the following command.
+If you would like to setup any specific `zsh` configuration that is only for the local machine then you can run the
+following command.
 
 ```bash
 make zshrc-local
 ```
 
-This will generate and symlink a file that you can use to extend the default
-`zshrc` configuration.  In general, I use this to set custom location for
-homebrew casks to be installed on certain machines.
+This will generate and symlink a file that you can use to extend the default `zshrc` configuration. In general, I use
+this to set custom location for homebrew casks to be installed on certain machines.

TODO.md

@@ -1,29 +1,59 @@
 # TODO
 
-- Add zsh functions to dots cli manager.
-- Add tmux plugins to dots cli manager.
-- Add tmux-powerline linking to `dots` cli manager.
-- Clean up zet commands, maybe make a gum / fzf filter script.
-- Update README to reflect ansible installation
-- Update ansible to do gpg installation.
-- Update ansible to include sketchybar.
+A list of in-progress and completed todo's.
 
-# Arch Todos
+## Arch Todos
 
-- Separate scripts that are used for configurations / store them somewhere aside
+- [ ] Update README, it's way out of date.
+- [x] Separate scripts that are used for configurations / store them somewhere aside
   from `~/.local/bin`
-- Clipse didn't work when installed on a new machine when I try to use the
+- [x] Add neomutt configuration files into the repo (or probably a private repo)
+- [x] Clipse didn't work when installed on a new machine when I try to use the
   config in the dotfiles, but works if I use the default config. Need to explore
   why (current thoughts are it has to do with creating the
   clipboard_history.json file and not letting clipse do it automatically).
-- Set sddm login theme, currently it doesn't allow me to echo values into the
-  /etc/sddm.conf file, also need to edit the theme in
-  `/usr/share/sddm/themes/catppuccin-mocha/theme.conf` to use the wallpaper as a
-  background image.
-  - Note: The background needs to be copied into the theme's background
-    directory. It didn't seem to work when I just set the path to somewhere in
-    my home directory.
-- Add script to generate yubikey authentication using the pam-u2f module
-  [documentation](https://wiki.archlinux.org/title/Universal_2nd_Factor).
-  - Note: that the directory this is stored in MUST be ~/.config/Yubico (I tried
-    using ~/.config/yubico and it didn't work)
+- [x] Need to add the following system packages for neovim/render-markdown.nvim
+    - [x] `libtexprintf`
+- [ ] Add pipewire-zeroconf to runs.
+    - [ ] Setup pipewire config to allow streaming output to homepod's.
+    - [See arch.wiki](https://wiki.archlinux.org/title/PipeWire)
+
+### Bootstrapping a new machine
+
+- [ ] Need to confirm bootstrap does things properly with git submodules.  Currently the
+    system run handles installing packages needed for my yubikey, probably need to automate
+    installing the public key into the keyring.
+    - [x] Add gpg public key import into `runs/after/system`
+    - [ ] Need to ensure ssh keys are setup before private submodules are loaded / installed,
+    so I need to make sure that Yubikey setup runs early and works for ssh authentication.
+    - [ ] Setup a new machine / virtual machine to test, as it's hard to test the scripts once a machine is setup.
+    - [ ] Need to add `repos` script when bootstrapping.
+
+### Keyboard / kanata
+
+- [x] Move keyboard (kanata) systemd service to be started as a '--user' service, as
+  it seems to not work when used on a desktop (mac mini) vs. laptop.
+  - [x] Need to update kanatactl to generate udev rules, etc. (see
+        here)[https://github.com/jtroo/kanata/blob/main/docs/setup-linux.md]
+- [ ] Need to rethink symbol / number keyboard layers.
+    - [ ] Move symbols to their own layer.
+    - [ ] I would like to have a symbols layer that I can hold modifier keys with a symbol
+          and would also like to possibly pass through underlying key / experiment so that
+          I can use default keybinds in certain applications (i.e. neovim `[b`, etc.).  
+- [x] Remove pkg sub-commands from kanatactl, it is available via package manager now.
+
+### Runs (package installs)
+
+- [x] Should runs just export / echo a list of packages, then the `run` script can handle the package
+      manager options / command.
+- [x] Think about adding a `before` and an `after` directory for runs, so that they can perform setup tasks after
+      the packages are installed.
+    - [x] The `before` and `after` file should have the same name as the `run` file.
+    - [ ] This could allow to remove / move the `system` script into the `after` directory.
+- [ ] Look into install packages with `nvim --headless`, not sure if this possible when using the new package
+    manager builtin to neovim as it prompts for user input to install packages.
+    - With lazy this was done with `nvim --headless "+Lazy! sync" +qa`
+
+### Mail
+
+- [ ] Remove outlook / office email setup, this has been moved to proton.

bootstrap

@@ -23,7 +23,8 @@ done
 echo "Args to bootstrap scripts: $args"
 echo "Installing packages may require your password multiple times."
 
-echo "Running packages" && $DEV_ENV/run "$args"
 echo "Installing configuration" && $DEV_ENV/dev-env "$args"
+# TODO: Need to run system run early, then once ssh keys are setup pull
+# 			git submodules, then run config install again.
+echo "Running packages" && $DEV_ENV/run "$args"
 echo "Installing webapps" && $DEV_ENV/webapp "$args"
-echo "Starting system services" && $DEV_ENV/system "$args"

dev-env

@@ -45,7 +45,7 @@ update_dirs() {
 		# Copy everything except systemd, share, and zsh folders, they need treated differently.
 		configs=$(
 			find . -mindepth 1 -maxdepth 1 -type d \
-        \( -name "systemd" -o -name "zsh" -o -name "share" -o -name "scripts" \) \
+				\( -name "systemd" -o -name "zsh" -o -name "share" -o -name "scripts" -o -name "kanata" \) \
 				-prune -o -type d -print
 		)
 		for c in $configs; do
@@ -81,11 +81,12 @@ copy() {
 # Copy all files from a directory into another directory.
 copy_files() {
 	log "copying over files from: $1"
-  pushd $1 &>/dev/null
+	pushd "$1" &>/dev/null || exit 1
 	(
 		for f in $(find . -mindepth 1 -maxdepth 1 -type f); do
 
-      local dest="$2/$(basename $f)"
+			declare dest
+			dest="$2/$(basename "$f")"
 
 			if [[ $dry_run == "0" ]]; then
 				rm -rf $dest >/dev/null 2>&1
@@ -97,7 +98,17 @@ copy_files() {
 			fi
 		done
 	)
-  popd &>/dev/null
+	popd &>/dev/null || exit 1
+}
+
+email() {
+	if command -v mailctl; then
+		log "Updating using mailctl..."
+		[[ $dry_run == "0" ]] && mailctl update && mailctl config
+	else
+		log "Installing mailctl..."
+		[[ $dry_run == "0" ]] && . "$DEV_ENV/mail/install"
+	fi
 }
 
 ############################## MAIN ##############################
@@ -107,8 +118,13 @@ update_dirs $DEV_ENV/env/.config $XDG_CONFIG_HOME
 update_dirs $DEV_ENV/env/.local $HOME/.local
 
 # SCRIPTS
-mkdir -p ~/.local/scripts >/dev/null 2>&1
-update_dirs $DEV_ENV/env/.local/scripts $HOME/.local/scripts
+mkdir -p ~/.local/scripts/{hypr,utils} >/dev/null 2>&1
+mkdir -p ~/.local/scripts/utils/{kanatactl,hpa,shorten-url} >/dev/null 2>&1
+update_dirs $DEV_ENV/env/.local/scripts/hypr $HOME/.local/scripts/hypr
+copy_files $DEV_ENV/env/.local/scripts/hypr $HOME/.local/scripts/hypr
+copy_files "$DEV_ENV/env/.local/scripts/utils/kanatactl" "$HOME/.local/scripts/utils/kanatactl"
+copy_files "$DEV_ENV/env/.local/scripts/utils/hpa" "$HOME/.local/scripts/utils/hpa"
+copy_files "$DEV_ENV/env/.local/scripts/utils/shorten-url" "$HOME/.local/scripts/utils/shorten-url"
 copy_files $DEV_ENV/env/.local/scripts $HOME/.local/scripts
 
 # SYSTEMD
@@ -120,8 +136,8 @@ copy_files $DEV_ENV/env/.config/systemd/user $XDG_CONFIG_HOME/systemd/user
 #       copying configuration.
 copy $DEV_ENV/env/.zshenv $HOME/.zshenv
 mkdir -p $XDG_CONFIG_HOME/zsh >/dev/null 2>&1
-update_dirs $DEV_ENV/env/.config/zsh $XDG_CONFIG_HOME/zsh
-copy_files $DEV_ENV/env/.config/zsh $XDG_CONFIG_HOME/zsh
+update_dirs $DEV_ENV/env/.config/zsh $XDG_CONFIG_HOME/zsh # copies sup-directories.
+copy_files $DEV_ENV/env/.config/zsh $XDG_CONFIG_HOME/zsh  # copies files in the root directory.
 
 # TMUX
 copy $DEV_ENV/env/.tmux.conf $HOME/.tmux.conf
@@ -138,11 +154,20 @@ copy_files $DEV_ENV/env/wallpapers $HOME/wallpapers
 mkdir $HOME/Pictures >/dev/null 2>&1
 mkdir -p $XDG_DATA_HOME/clipse/tmp_files
 copy $DEV_ENV/dev-env $HOME/.local/scripts/dev-env
+copy $DEV_ENV/env/.markdownlint.jsonc $HOME/.markdownlint.jsonc
+copy $DEV_ENV/env/.prettierrc $HOME/.prettierrc
 
 mkdir -p $XDG_DATA_HOME/applications/icons
 copy_files $DEV_ENV/env/.local/share/applications $XDG_DATA_HOME/applications
 copy_files $DEV_ENV/env/.local/share/applications/icons $XDG_DATA_HOME/applications/icons
 
+# Custom package builds.
+mkdir $HOME/pkgbuilds
+update_dirs $DEV_ENV/env/pkgbuilds $HOME/pkgbuilds
+
+# Email.
+email
+
 if [[ $dry_run == "0" ]]; then
 	systemctl --user daemon-reload
 	hyprctl reload

devcontainer-env

@@ -0,0 +1,76 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# Intsalls appropriate dotfiles inside a devcontainer context.
+
+XDG_CONFIG_HOME=${XDG_CONFIG_HOME:-"$HOME/.config"}
+DEV_ENV=${DEV_ENV:-$(dirname "${BASH_SOURCE[0]}")}
+
+if [ ! -d "$DEV_ENV" ]; then
+	echo "[ERROR]: DEV_ENV variable does not exist."
+	exit 1
+fi
+
+log() {
+	echo "$*"
+}
+
+copy_dir() {
+	local dir=${1:-""}
+	local path="${DEV_ENV}/${dir}"
+
+	if [ -z "$dir" ] || [ ! -d "$path" ]; then
+		log "[ERROR]: Directory does not exist: $dir"
+		exit 1
+	else
+		log "Copying dir: $dir"
+		cp -R "$path" "$XDG_CONFIG_HOME"
+	fi
+}
+
+copy_file() {
+	local file=${1:-""}
+
+	if [[ -z "$file" ]] || [[ ! -f "$file" ]]; then
+		log "[ERROR]: file does not exist: $file"
+		exit 1
+	else
+		log "Copying file: $file"
+		cp "$DEV_ENV/$file" "$HOME"
+	fi
+}
+
+# MAIN
+dirs=(
+	env/.config/eza
+	env/.config/git
+	env/.config/ripgrep
+	env/.config/starship
+	env/.config/yazi
+	env/.config/zsh
+)
+
+files=(
+	env/.markdownlint.jsonc
+	env/.prettierrc
+	env/.tmux.conf
+	env/.zshenv
+)
+
+for dir in "${dirs[@]}"; do
+	copy_dir "$dir"
+done
+
+for file in "${files[@]}"; do
+	copy_file "$file"
+done
+
+# Install neovim config
+git submodule update --init --remote env/.config/nvim
+source env/.config/nvim/install.sh
+
+# Install my scripts
+cp -R env/.local/scripts "$HOME/.local"

env/.config/aap/config.toml

@@ -0,0 +1,75 @@
+# This config is setup for running inside the docker container.
+#
+# NOTE:
+# Configuration settings for the `hpa` command line tool.
+# You can delete settings that are not applicable to your use case.
+
+# Default arguments / options that get passed into `ansible-playbook` commands.
+# WARNING: Do not put arguments / options that contain spaces in the same string,
+#          they should be separate strings, for example do not do something like
+#          ['--tags debug'], instead use ['--tags', 'debug'].
+#
+args = ['--tags', 'debug']
+
+# Set to true if you want to pass the vault args to `ansible-playbook` commands.
+useVaultArgs = true
+
+# NOTE:
+# Configuration for running the generate command(s). This allows custimizations
+# to the files that get used to generate the final output (generally a pdf).
+# See `pandoc --help`.  Below are the defaults that get used, which only need
+# adjusted if your template does not follow the default template design or if
+# you add extra files to your template that need to be included in the final
+# output. Also be aware that any of the files specified in the `files` or
+# `includeInHeader` options, need to be inside the `buildDirectory` when generating
+# the final output file.
+
+# [generate]
+# this relative to the project directory.
+# buildDirectory = '.build'
+# pdfEngine = 'xelatex'
+# includeInHeader = [
+#   'head.tex',
+#   'footer.tex'
+# ]
+# files = [
+#   'Report.md',
+#   'Definitions.md'
+# ]
+# outputFileName = 'Report'
+
+# NOTE:
+# These are more for local development of the ansible playbook and should not be needed
+# in most cases. Uncomment the lines if you want to customize the playbook and use it
+# instead of the provided / default playbook.
+
+[playbook]
+directory = '/root/.local/share/hpa/playbook'
+inventory = '/root/.local/share/hpa/playbook/inventory.ini'
+version = 'main'
+
+# NOTE:
+# These are to declare where your template files are either on your local system or
+# a remote git repository.
+[template]
+# The directory path on your local system to the template files.
+directory = '/root/.local/share/hpa/airflow-assessment-template'
+vars = 'repo_vars'
+
+# The url to a git repository that contains your template files.
+# url = 'https://git.example.com/consult-template.git'
+
+# The version, tag, branch, or sha of the template files to clone from the remote
+# template repository. In general it is best practice to use a version instead of a
+# branch.
+# version = '1.0.0'
+
+# NOTE:
+# Holds settings for `ansible-vault` commands.
+[vault]
+# Arguments to pass to commands that use `ansible-vault`, such as encrypting or decrypting
+# files.
+args = ['--vault-password-file=/run/secrets/vault-pass']
+
+# An id to use when encrypting `ansible-vault` files.
+#encryptId = 'myId'

env/.config/ghostty/config

@@ -3,7 +3,7 @@ theme = Catppuccin Mocha
 confirm-close-surface = false
 
 font-family = "Fira Code"
-font-size = 13
+font-size = 18
 font-thicken = false
 
 window-save-state = always

env/.config/git/config

@@ -8,6 +8,7 @@
 [user]
 	name = Michael Housh
 	email = michael@mhoush.com
+  signingkey = 0x90D3EB6274D5B7CF
 
 [commit]
 	gpgsign = true
@@ -29,6 +30,7 @@
   default = simple
 	autoSetupRemote = true
   followTags = true
+	recurseSubmodules = on-demand
 
 [fetch]
 	prune = true
@@ -64,3 +66,6 @@
   autoSquash = true
   autoStash = true
   updateRefs = true
+
+[submodule]
+	recurse = true

env/.config/hpa/config.toml

@@ -0,0 +1,75 @@
+# This config is setup for running inside the docker container.
+#
+# NOTE:
+# Configuration settings for the `hpa` command line tool.
+# You can delete settings that are not applicable to your use case.
+
+# Default arguments / options that get passed into `ansible-playbook` commands.
+# WARNING: Do not put arguments / options that contain spaces in the same string,
+#          they should be separate strings, for example do not do something like
+#          ['--tags debug'], instead use ['--tags', 'debug'].
+#
+args = ['--tags', 'debug']
+
+# Set to true if you want to pass the vault args to `ansible-playbook` commands.
+useVaultArgs = true
+
+# NOTE:
+# Configuration for running the generate command(s). This allows custimizations
+# to the files that get used to generate the final output (generally a pdf).
+# See `pandoc --help`.  Below are the defaults that get used, which only need
+# adjusted if your template does not follow the default template design or if
+# you add extra files to your template that need to be included in the final
+# output. Also be aware that any of the files specified in the `files` or
+# `includeInHeader` options, need to be inside the `buildDirectory` when generating
+# the final output file.
+
+# [generate]
+# this relative to the project directory.
+# buildDirectory = '.build'
+# pdfEngine = 'xelatex'
+# includeInHeader = [
+#   'head.tex',
+#   'footer.tex'
+# ]
+# files = [
+#   'Report.md',
+#   'Definitions.md'
+# ]
+# outputFileName = 'Report'
+
+# NOTE:
+# These are more for local development of the ansible playbook and should not be needed
+# in most cases. Uncomment the lines if you want to customize the playbook and use it
+# instead of the provided / default playbook.
+
+[playbook]
+directory = '/root/.local/share/hpa/playbook'
+inventory = '/root/.local/share/hpa/playbook/inventory.ini'
+version = 'main'
+
+# NOTE:
+# These are to declare where your template files are either on your local system or
+# a remote git repository.
+[template]
+# The directory path on your local system to the template files.
+directory = '/root/.local/share/hpa/template'
+vars = 'repo_vars'
+
+# The url to a git repository that contains your template files.
+# url = 'https://git.example.com/consult-template.git'
+
+# The version, tag, branch, or sha of the template files to clone from the remote
+# template repository. In general it is best practice to use a version instead of a
+# branch.
+# version = '1.0.0'
+
+# NOTE:
+# Holds settings for `ansible-vault` commands.
+[vault]
+# Arguments to pass to commands that use `ansible-vault`, such as encrypting or decrypting
+# files.
+args = ['--vault-password-file=/run/secrets/vault-pass']
+
+# An id to use when encrypting `ansible-vault` files.
+#encryptId = 'myId'

env/.config/hypr/hyprautostart.conf

@@ -6,11 +6,10 @@
 # Autostart necessary processes (like notifications daemons, status bars, etc.)
 # Or execute your favorite apps at launch like this:
 
-exec-once = pidof hyprpaper | uwsm app -- hyprpaper
+exec-once = uwsm app -- hyprpaper
 exec-once = pidof hypridle | uwsm app -- hypridle
-exec-once = uwsm app -- elephant
-exec-once = uwsm app -- swaync
-exec-once = uwsm app -- walker --gapplication-service &
-exec-once = uwsm app -- waybar
+exec-once = pidof hyprlauncher | uwsm app -- hyprlauncher -d
+exec-once = pidof swaync | uwsm app -- swaync
+exec-once = pidof waybar | uwsm app -- waybar
 exec-once = uwsm app -- clipse -listen
 

env/.config/hypr/hyprenv.conf

@@ -18,7 +18,7 @@ env = ELECTRON_OZONE_PLATFORM_HINT,wayland
 env = OZONE_PLATFORM,wayland
 env = XDG_SESSION_TYPE,wayland
 
-env = GDK_SCALE=2
+env = GDK_SCALE,2
 
 # Allow better support for screen sharing (Google Meet, Discord, etc)
 env = XDG_CURRENT_DESKTOP,Hyprland

env/.config/hypr/hyprinput.conf

@@ -10,7 +10,7 @@ input {
     kb_options = ctrl:nocaps
     kb_rules =
 
-    repeat_rate = 35
+    repeat_rate = 50
     repeat_delay = 200
 
     follow_mouse = 2
@@ -24,9 +24,9 @@ input {
 }
 
 # https://wiki.hyprland.org/Configuring/Variables/#gestures
-gestures {
-    workspace_swipe = false
-}
+# gestures {
+#     workspace_swipe = false
+# }
 
 # Example per-device config
 # See https://wiki.hyprland.org/Configuring/Keywords/#per-device-input-configs for more

env/.config/hypr/hyprkeybinds.conf

@@ -5,17 +5,18 @@
 # See https://wiki.hyprland.org/Configuring/Keywords/
 $mainMod = SUPER                # "Command/Windows" key as main modifier
 $windowMod = ALT                # Option for window controls.
+$MEH = ALT SHIFT CTRL
 $HYPER = ALT SHIFT SUPER CTRL
 
 # See https://wiki.hyprland.org/Configuring/Keywords/
 
 $terminal = uwsm app -- ghostty
-$browser = uwsm app -- zen-browser
+$browser = uwsm app -- brave
 $fileManager = $terminal -e yazi
 $fileBrowser = uwsm app -- nautilus
-$menu = uwsm app -- walker
+$menu = hyprlauncher
 $scripts = ~/.local/scripts/hypr
-$pwa = $scripts/launch-webapp
+$pwa = $scripts/webapp launch
 $tmuxSessionator = ~/.local/scripts/tmux-sessionator
 $clipboardHistory = com.ghostty.clipse $terminal --class=com.ghostty.clipse -e clipse
 $uninstallDesktop = $terminal --class=com.ghostty.float -e $scripts/uninstall-desktop-app
@@ -35,14 +36,14 @@ $housecallPro = https://pro.housecallpro.com/app/calendar_new
 bindd = $mainMod,       SPACE,  Application launcher,                     exec, $menu
 bindd = $mainMod,       RETURN, New terminal,                             exec, $terminal
 bindd = $mainMod SHIFT, RETURN, New floating terminal,                    exec, $terminal --class=com.ghostty.float
-bindd = $mainMod,       TAB,    Focus previous workspace,                 exec, $scripts/switch-to-workspace previous
-bindd = $mainMod,       A,      [A]i - launch / focus,                    exec, $pwa --or-focus "https://chatgpt.com"
-bindd = $mainMod SHIFT, A,      [A]i - new window,                        exec, $pwa "https://chatgpt.com"
+bindd = $mainMod,       TAB,    Focus previous workspace,                 exec, $scripts/workspacectl switch --to previous
+bindd = $mainMod,       A,      [A]i - launch / focus,                    exec, $pwa --or-focus "https://ollama.housh.dev"
+bindd = $mainMod SHIFT, A,      [A]i - new window,                        exec, $pwa "https://ollama.housh.dev"
 bindd = $mainMod,       B,      New [b]rowser,                            exec, $browser
-bindd = $mainMod SHIFT, B,      New private [b]rowser,                    exec, $browser --private-window
-bindd = $mainMod,       C,      [C]alendar,                               exec, $pwa --or-focus "https://www.icloud.com/calendar"
+bindd = $mainMod SHIFT, B,      New private [b]rowser,                    exec, $browser --incognito
+bindd = $mainMod,       C,      [C]alendar,                               togglespecialworkspace, calendar
 bindd = $mainMod SHIFT, C,      [C]onfig folder in tmux session,          exec, $terminal -e $tmuxSessionator ~/.config
-bindd = $mainMod,       D,      [D]ispatch app - special workspace,       exec, $pwa --special dispatch $housecallPro
+bindd = $mainMod,       D,      [D]ispatch app - special workspace,       togglespecialworkspace, dispatch
 bindd = $mainMod SHIFT, D,      [D]ispatch app - new window,              exec, $pwa --new $housecallPro
 bindd = $mainMod,       E,      [E]mail - personal,                       exec, $pwa --or-focus "https://mail.proton.me"
 bindd = $mainMod SHIFT, E,      [E]mail - work,                           exec, $scripts/launch --or-focus thunderbird uwsm app -- thunderbird
@@ -52,15 +53,16 @@ bindd = $mainMod,       G,      [G]itea,                                  exec,
 bindd = $mainMod SHIFT, G,      [G]ithub,                                 exec, $pwa --or-focus "https://github.com"
 bindd = $mainMod,       H,      Focus window - left,                      movefocus, l # move window focus using vim keys
 bindd = $mainMod SHIFT, H,      Workspace - back,                         workspace, -1
+bindd = $mainMod,       I,      Localsend,                                exec, $scripts/launch --or-close localsend uwsm app -- localsend
 bindd = $mainMod,       J,      Focus window - down,                      movefocus, d # move window focus using vim keys
 bindd = $mainMod,       K,      Focus window - up,                        movefocus, u # move window focus using vim keys
 bindd = $mainMod,       L,      Focus window - right,                     movefocus, r # move window focus using vim keys
 bindd = $mainMod SHIFT, L,      Workspace - forward,                      workspace, +1
-bindd = $mainMod,       M,      [M]usic - apple,                          exec, $pwa --special music "https://music.apple.com"
+bindd = $mainMod,       M,      [M]usic - jellyfin-tui,                   togglespecialworkspace, music
 bindd = $mainMod SHIFT, M,      [M]enu bar - toggle visible,              exec, $scripts/waybarctl --toggle
 bindd = $mainMod,       O,      Purchase [o]rders,                        exec, $pwa --special dispatch "https://po.housh.dev"
-bindd = $mainMod,       P,      [P]assword manager,                       exec, $pwa --special pass "https://pass.proton.me"
-bindd = $mainMod SHIFT, P,      Toggle [p]seudo window mode,              pseudo, # dwindle
+bindd = $mainMod,       P,      [P]assword manager,                       togglespecialworkspace, pass
+bindd = $mainMod SHIFT, P,      [P]hotos,                                 exec, $pwa --or-focus "https://photos.housh.dev"
 bindd = $mainMod SHIFT, R,      [R]estart menu bar,                       exec, $scripts/waybarctl --restart
 bindd = $mainMod,       S,      Toggle [s]pecial workspace,               togglespecialworkspace, magic  # use $windowMod S to send window to the special workspace
 bindd = $mainMod,       Y,      [Y]ouTube,                                exec, $pwa --or-focus "https://youtube.com"
@@ -68,24 +70,29 @@ bindd = $mainMod,       U,      [U]nifi,                                  exec,
 bindd = $mainMod SHIFT, U,      [U]tility launcher,                       exec, $scripts/launch --or-close $utilsLauncher
 bindd = $mainMod,       V,      Clipboard history,                        exec, $scripts/launch --or-close $clipboardHistory
 bindd = $mainMod,       W,      Close current window,                     killactive,
-bindd = $mainMod SHIFT, W,      Close all windows in active workspace,    exec, $scripts/close-windows --active-workspace
+bindd = $mainMod SHIFT, W,      Close all windows in active workspace,    exec, $scripts/windowctl close --active-workspace
 
 # Switch to workspaces with mainMod + [0-9]
-bindd = $mainMod, 1, Switch to workspace [1],  exec, $scripts/switch-to-workspace 1
-bindd = $mainMod, 2, Switch to workspace [2],  exec, $scripts/switch-to-workspace 2
-bindd = $mainMod, 3, Switch to workspace [3],  exec, $scripts/switch-to-workspace 3
-bindd = $mainMod, 4, Switch to workspace [4],  exec, $scripts/switch-to-workspace 4
-bindd = $mainMod, 5, Switch to workspace [5],  exec, $scripts/switch-to-workspace 5
-bindd = $mainMod, 6, Switch to workspace [6],  exec, $scripts/switch-to-workspace 6
-bindd = $mainMod, 7, Switch to workspace [7],  exec, $scripts/switch-to-workspace 7
-bindd = $mainMod, 8, Switch to workspace [8],  exec, $scripts/switch-to-workspace 8
-bindd = $mainMod, 9, Switch to workspace [9],  exec, $scripts/switch-to-workspace 9
-bindd = $mainMod, 0, Switch to workspace 1[0], exec, $scripts/switch-to-workspace 10
+bindd = $mainMod, 1, Switch to workspace [1],  exec, $scripts/workspacectl switch --to 1
+bindd = $mainMod, 2, Switch to workspace [2],  exec, $scripts/workspacectl switch --to 2
+bindd = $mainMod, 3, Switch to workspace [3],  exec, $scripts/workspacectl switch --to 3
+bindd = $mainMod, 4, Switch to workspace [4],  exec, $scripts/workspacectl switch --to 4
+bindd = $mainMod, 5, Switch to workspace [5],  exec, $scripts/workspacectl switch --to 5
+bindd = $mainMod, 6, Switch to workspace [6],  exec, $scripts/workspacectl switch --to 6
+bindd = $mainMod, 7, Switch to workspace [7],  exec, $scripts/workspacectl switch --to 7
+bindd = $mainMod, 8, Switch to workspace [8],  exec, $scripts/workspacectl switch --to 8
+bindd = $mainMod, 9, Switch to workspace [9],  exec, $scripts/workspacectl switch --to 9
+bindd = $mainMod, 0, Switch to workspace 1[0], exec, $scripts/workspacectl switch --to 10
 
 # Move all workspaces to a monitor
 bindd = $mainMod SHIFT, 1, Switch all workspaces to monitor [1], exec, $scripts/mv-all-workspaces-to-monitor 1
 bindd = $mainMod SHIFT, 0, Switch all workspaces to monitor [0], exec, $scripts/mv-all-workspaces-to-monitor 0
 
+# Screen Shots
+bindd = $mainMod SHIFT, 3, Screenshot a monitor,      exec, hyprshot --mode output --output-folder ~/Pictures
+bindd = $mainMod SHIFT, 4, Screenshot a selection,    exec, hyprshot --mode region --output-folder ~/Pictures
+bindd = $mainMod SHIFT, 5, Screenshot a window,       exec, hyprshot --mode window --output-folder ~/Pictures
+
 # Scroll through existing workspaces with mainMod + scroll
 bind = $mainMod, mouse_down, workspace, e+1
 bind = $mainMod, mouse_up, workspace, e-1
@@ -99,19 +106,21 @@ bindm = $mainMod SHIFT, mouse_down, resizewindow
 # Window controls
 #
 # These should in general use the $windowMod prefix
-#######################################################################################
+##########################################################################################
 #       MOD             # KEY  #     DESC                         # Action               # 
-#######################################################################################
-bindd = CTRL SHIFT,   F,     Toggle [f]loating,                   exec, $scripts/window-toggle-floating
+##########################################################################################
 # TODO: Decide which is prefered to switch to fullscreen.
 bindd = CTRL,             F,     Toggle [f]ullscreen,                 fullscreen,
-bindd = $windowMod,   F,     Toggle [f]ullscreen,                 fullscreen,
+bindd = $windowMod,       F,     Toggle [f]loating,                   exec, $scripts/windowctl toggle-floating --active --width 80% --height 80%
+bindd = $windowMod SHIFT, F,     Toggle [f]loating,                   exec, $scripts/windowctl toggle-floating --active
 bindd = $windowMod,       H,     Move window - left,                  movewindow, l     # move windows with windowMod + vim keys
 bindd = $windowMod,       J,     Move window - down,                  movewindow, d     # move windows with windowMod + vim keys
 bindd = $windowMod,       K,     Move window - up,                    movewindow, u     # move windows with windowMod + vim keys
 bindd = $windowMod,       L,     Move window - right ,                movewindow, r     # move windows with windowMod + vim keys
 bindd = $windowMod,       M,     Move window to [m]usic workspace,    movetoworkspace, special:music
+bindd = $windowMod SHIFT, P,     Toggle [p]seudo window mode,         pseudo, # dwindle
 bindd = $windowMod,       S,     Move window to [s]pecial workspace,  movetoworkspacesilent, special:magic
+bindd = $windowMod,       W,     [W]indow actions,                    exec, $scripts/windowctl launch action --active
 # FIX: Changes size of window, this works a different depending on if
 # the window is on the right or left of the screen.
 #
@@ -135,16 +144,17 @@ bindd = $windowMod, 9, Move window to workspace [9], movetoworkspace, 9
 bindd = $windowMod, 0, Move window to workspace 1[0], movetoworkspace, 10
 
 #######################################################################################
-# HYPER controls
+# HYPER (Alt + Shift + Super + Ctrl) controls
 #
 # These should in general use the $HYPER prefix
 #######################################################################################
 #       MOD          # KEY  #     DESC                         # Action               # 
 #######################################################################################
 
+bindd = $HYPER,       H,     [H]ide / show windows,              exec, $scripts/workspacectl toggle
 bindd = $HYPER,       J,     Toggle split orientation,           togglesplit           # dwindle
 bindd = $HYPER,       L,     [L]ock computer,                    exec, hyprlock
-bindd = $HYPER,       W,     Close all windows,                  exec, $scripts/close-windows --all
+bindd = $HYPER,       W,     Close all windows,                  exec, $scripts/windowctl close --all
 
 # Move active window to a workspace silently with HYPER + [0-9]
 bindd = $HYPER, 1, Move window to workspace silent [1], movetoworkspacesilent, 1
@@ -158,6 +168,16 @@ bindd = $HYPER, 8, Move window to workspace silent [8], movetoworkspacesilent, 8
 bindd = $HYPER, 9, Move window to workspace silent [9], movetoworkspacesilent, 9
 bindd = $HYPER, 0, Move window to workspace silent 1[0], movetoworkspacesilent, 10
 
+
+#######################################################################################
+# MEH (Alt + Shift + Ctrl) controls
+#
+# These should in general use the $MEH prefix
+#######################################################################################
+#       MOD          # KEY  #     DESC                         # Action               # 
+#######################################################################################
+bindd = $MEH,         L,     [L]ogs picker / viewer,            exec, $terminal --class=com.ghostty.float -e $scripts/utils/logs/logs-picker
+
 ##################################################
 # Multi-media keys
 ##################################################

env/.config/hypr/hyprland.conf

@@ -6,12 +6,13 @@
 # Refer to the wiki for more information.
 # https://wiki.hyprland.org/Configuring/
 
-source = ~/.config/hypr/env.conf
-source = ~/.config/hypr/monitors.conf
-source = ~/.config/hypr/windows.conf
-source = ~/.config/hypr/keybinds.conf
-source = ~/.config/hypr/input.conf
-source = ~/.config/hypr/autostart.conf
+source = ~/.config/hypr/hyprenv.conf
+source = ~/.config/hypr/hyprmonitors.conf
+source = ~/.config/hypr/hyprwindows.conf
+source = ~/.config/hypr/hyprworkspaces.conf
+source = ~/.config/hypr/hyprkeybinds.conf
+source = ~/.config/hypr/hyprinput.conf
+source = ~/.config/hypr/hyprautostart.conf
 
 #####################
 ### LOOK AND FEEL ###

env/.config/hypr/hyprlauncher.conf

@@ -0,0 +1,2 @@
+
+desktop_launch_prefix = uwsm app --

env/.config/hypr/hyprmonitors.conf

@@ -4,7 +4,5 @@
 
 # See https://wiki.hyprland.org/Configuring/Monitors/
 monitor= ,preferred,auto,auto
-#monitor = HDMI-A-1, preferred, 0x0, auto
-#monitor = HDMI-A-1, preferred, 0x0, 1.66667
 
 

env/.config/hypr/hyprpaper.conf

@@ -1,3 +1,6 @@
-preload = /home/michael/wallpapers/wall1.png
-wallpaper = ,/home/michael/wallpapers/wall1.png
-splash = true
+wallpaper {
+	monitor = 
+	path = /home/michael/wallpapers/wall1.png
+	fit_mode = cover
+}
+

env/.config/hypr/hyprtoolkit.conf

@@ -0,0 +1,8 @@
+background = rgb(1e1e2e)
+base = rgb(b4befe)
+alternate_base = rgb(cdd6f4)
+text = rgb(cdd6f4)
+bright_text = rgb(89b4fa)
+accent = rgb(b4befe)
+accent_secondary = rgb(cba6f7)
+

env/.config/hypr/hyprwindows.conf

@@ -0,0 +1,47 @@
+###############
+### WINDOWS ###
+###############
+
+# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
+
+# windowrule = float, tag:floating-window
+# windowrule = center, tag:floating-window
+# windowrule = size 60% 60%, tag:floating-window
+#
+# # Weather tui
+# windowrule = float, class:^(com.ghostty.weather)$
+# windowrule = center, class:^(com.ghostty.weather)$
+# windowrule = size 90% 80%, class:^(com.ghostty.weather)$
+#
+# # Force windows to be a floating window
+# windowrule = tag +floating-window, class:^(blueberry.py|org.gnome.Nautilus|com.ghostty.float)$
+# windowrule = tag +floating-window, class:^(com.ghostty.windowctl)$
+# windowrule = tag +floating-window, class:^(com.ghostty.utils-launcher)$
+# windowrule = tag +floating-window, class:^(com.ghostty.homelab-launcher)$
+#
+# # Force to stay focused when visible.
+# windowrule = stayfocused, class:(blueberry.py)
+# windowrule = stayfocused, class:Pinentry.gtk
+# windowrule = stayfocused, class:com.ghostty.float
+# windowrule = stayfocused, class:com.ghostty.windowctl
+# windowrule = stayfocused, class:^(com.ghostty.utils-launcher)$
+#
+# # Clipboard history tui in floating window.
+# windowrule = tag +floating-window, class:.*clipse.*
+# windowrule = stayfocused, class:.*clipse.*
+#
+# # Ignore maximize requests from apps. You'll probably like this.
+# windowrule = suppressevent maximize, class:.*
+#
+# # Just a dash of opacity by default.
+# windowrule = opacity 0.97 0.92, class:.*
+# # No opacity on youtube.
+# windowrule = opacity 1.0, class:.*youtube.com.*
+#
+# # Fix some dragging issues with XWayland
+# windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
+#
+# # To get more information about a window’s class, title, XWayland status or its size, you can use `hyprctl clients`. (From Hyprland Wiki)
+# windowrulev2 = float,class:^(one.alynx.showmethekey)$
+# windowrulev2 = float,class:^(showmethekey-gtk)$ # make window floating
+# windowrulev2 = pin,class:^(showmethekey-gtk)$ # pin window

env/.config/hypr/hyprworkspaces.conf

@@ -0,0 +1,15 @@
+##################
+### WORKSPACES ###
+##################
+
+# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
+
+$scripts = ~/.local/scripts/hypr
+$pwa = $scripts/webapp launch
+$housecallPro = $pwa "https://pro.housecallpro.com/app/calendar_new"
+
+workspace = special:hidden, invisible
+workspace = special:pass,on-created-empty: $pwa "https://pass.proton.me"
+workspace = special:dispatch,on-created-empty: $housecallPro && $housecallPro
+workspace = special:music,on-created-empty: ghostty --class=com.ghostty.music -e jellyfin-tui
+workspace = special:calendar,on-created-empty: uwsm app -- gnome-calendar

env/.config/hypr/windows.conf

@@ -1,50 +0,0 @@
-##############################
-### WINDOWS AND WORKSPACES ###
-##############################
-
-# See https://wiki.hyprland.org/Configuring/Window-Rules/ for more
-# See https://wiki.hyprland.org/Configuring/Workspace-Rules/ for workspace rules
-#
-
-windowrule = float, tag:floating-window
-windowrule = center, tag:floating-window
-windowrule = size 60% 60%, tag:floating-window
-
-# Weather tui
-windowrule = float, class:^(com.ghostty.weather)$
-windowrule = center, class:^(com.ghostty.weather)$
-windowrule = size 90% 80%, class:^(com.ghostty.weather)$
-
-# Force windows to be a floating window
-windowrule = tag +floating-window, class:^(blueberry.py|org.gnome.Nautilus|com.ghostty.float)$
-# windowrule = tag +floating-window, class:^(com.ghostty.utils-launcher)$
-
-# Force to stay focused when visible.
-windowrule = stayfocused, class:(blueberry.py)
-windowrule = stayfocused, class:Pinentry.gtk
-windowrule = stayfocused, class:com.ghostty.float
-
-# Utils-Launcher
-windowrule = stayfocused, class:^(com.ghostty.utils-launcher)$
-windowrule = float, class:^(com.ghostty.utils-launcher)$
-windowrule = center, class:^(com.ghostty.utils-launcher)$
-windowrule = size 80% 80%, class:^(com.ghostty.utils-launcher)$
-
-# Clipboard history tui in floating window.
-windowrule = tag +floating-window, class:.*clipse.*
-windowrule = stayfocused, class:.*clipse.*
-
-# Ignore maximize requests from apps. You'll probably like this.
-windowrule = suppressevent maximize, class:.*
-
-# Just a dash of opacity by default.
-windowrule = opacity 0.97 0.92, class:.*
-# No opacity on youtube.
-windowrule = opacity 1.0, class:.*youtube.com.*
-
-# Fix some dragging issues with XWayland
-windowrule = nofocus,class:^$,title:^$,xwayland:1,floating:1,fullscreen:0,pinned:0
-
-workspace = special:hidden, invisible
-workspace = special:pass, class:.*pass.proton.me.*
-workspace = special:dispatch, class:.*pro.housecallpro.com.*

env/.config/hypr/workspaces.conf

@@ -1,14 +0,0 @@
-
-# Set work spaces 1-5 to be on external monitor
-workspace = 1, monitor:1
-workspace = 2, monitor:1
-workspace = 3, monitor:1
-workspace = 4, monitor:1
-workspace = 5, monitor:1
-
-# Set work spaces 6-10 to be on internal monitor
-workspace = 6, monitor:0
-workspace = 7, monitor:0
-workspace = 8, monitor:0
-workspace = 9, monitor:0
-workspace = 10, monitor:0

env/.config/kanata/macbook.kbd

@@ -0,0 +1,151 @@
+;; Macbook-Pro configuration file.
+;;
+
+;; Adapted from https://github.com/linkarzu/dotfiles-latest/blob/main/kanata/configs/macbook-subl.kbd
+;; Video related to this file
+;; https://youtu.be/jvJ3f4HHiMY
+
+;; Kanata docs
+;; https://github.com/jtroo/kanata/blob/main/docs/config.adoc
+
+;; OS key code mappings
+;; https://github.com/jtroo/kanata/blob/main/parser/src/keys/mod.rs
+
+(defcfg
+  process-unmapped-keys yes
+  log-layer-changes no
+  danger-enable-cmd yes
+  concurrent-tap-hold yes
+  rapid-event-delay 10
+  allow-hardware-repeat false
+
+  ;; When any non-chord activation happens, this timeout begins. Until this timeout expires
+  ;; all inputs will immediately skip chords processing and be processed by the active layer.
+  ;; chords-v2-min-idle 250
+)
+
+;; Variables
+(defvar
+ tap-higher 400
+ tap-time 200
+ tap-time-plus 300
+ hold-time-plus 300
+ hold-time 200
+ chord-time 60
+ subl-time 200
+ tmux-delay 40
+)
+
+;; Only one defsrc is allowed.
+;;
+;; defsrc defines the keys that will be intercepted by kanata. The order of the
+;; keys matches with deflayer declarations and all deflayer declarations must
+;; have the same number of keys as defsrc. Any keys not listed in defsrc will
+;; be passed straight to the operating system.
+(defsrc
+  esc    f1   f2   f3   f4   f5   f6   f7   f8   f9   f10  f11  f12
+  grv    1    2    3    4    5    6    7    8    9    0    -    =    bspc
+  tab    q    w    e    r    t    y    u    i    o    p    [    ]    \
+  caps   a    s    d    f    g    h    j    k    l    ;    '    ret
+  lsft   z    x    c    v    b    n    m    ,    .    /    ▲   rsft
+        lctl  lalt lmet          spc         rmet ralt ◀    ▼    ▶
+)
+
+(defalias
+  ;; Modifier keys - Left
+  mlctl (tap-hold $tap-time $hold-time a lctl)
+  mlalt (tap-hold $tap-time $hold-time s lalt)
+  mlmet (tap-hold $tap-time $hold-time d lmet)
+  mlsft (tap-hold $tap-time $hold-time f lsft)
+
+  ;; Modifier keys - Right
+  mrsft (tap-hold $tap-time $hold-time j rsft)
+  mrmet (tap-hold $tap-time $hold-time k rmet)
+  mralt (tap-hold $tap-time $hold-time l ralt)
+  mrctl (tap-hold $tap-time $hold-time ; rctl)
+
+  mretu (tap-hold $tap-time $hold-time tab ret)
+
+  ;; number and symbols layer trigger keys.
+  mlnums (tap-hold-press $tap-time-plus $hold-time-plus lmet (layer-while-held nums_and_symbols))
+  mrnums (tap-hold-press $tap-time-plus $hold-time-plus rmet (layer-while-held nums_and_symbols))
+
+  ;; mouse layer trigger keys.
+  mlms (tap-hold-press $tap-time $hold-time esc (layer-while-held mouse))
+  mrms (tap-hold-press $tap-time $hold-time ret (layer-while-held mouse))
+
+  ;; Multi
+  mhypr (tap-hold $tap-time $hold-time spc (multi lsft lctl lalt lmet)) ;; Hyper key
+
+  ;; Sublayers
+  ;; I implemented sublayers thanks to the help in this discussion
+  ;; https://github.com/jtroo/kanata/discussions/1765
+  ;; DO NOT USE THE SUBLAYERS IN A FREQUENTLY PRESSED KEY LIKE SPACEBAR
+  ;; It made typing spaces a pain in the ass, enter is not pressed to often, so it works way better
+  ;; msubl (tap-hold-press $subl-time $subl-time ret (layer-while-held sublayers))
+
+  ;; Execute script
+  ;; maltt (cmd open "btt://execute_assigned_actions_for_trigger/?uuid=F35EF770-FAA5-448A-957D-70BB449DEB0F")
+
+  ;; key and script at the same time
+  ;; maltt (tap-hold $tap-time $hold-time lsft (cmd open "btt://execute_assigned_actions_for_trigger/?uuid=F35EF770-FAA5-448A-957D-70BB449DEB0F"))
+)
+
+;; Blank layer
+;; (deflayer {{NAME}}
+;;   esc    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX           ;; function row
+;;   grv    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    bspc   ;; number row
+;;   tab    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX     ;; top letter row
+;;   caps   XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    ret          ;; home row
+;;   lsft   XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    XX   rsft          ;; bottom letter row
+;;         lctl  lalt lmet          spc         rmet ralt ◀    ▼    ▶                      ;; control row
+;; )
+
+;; Main layer
+;;
+;; Disable most function keys, and add homerow mods.
+;;
+(deflayer main
+  esc     brdn    bru     XX      XX      XX   XX   XX       XX     XX     mute   vold  volu
+  grv     1       2       3       4       5    6    7        8      9       0       -    =    bspc
+  tab     q       w       e       r       t    y    u        i      o       p       [    ]    \
+  @mlms @mlctl  @mlalt  @mlmet  @mlsft  g    h    @mrsft  @mrmet  @mralt  @mrctl    '    @mrms
+  lsft    z       x       c       v       b    n    m        ,      .       /       ▲    rsft
+         lctl    lalt    @mlnums             spc          @mrnums   ralt     ◀      ▼    ▶
+)
+
+;; Number and Symbols layer
+(deflayer nums_and_symbols
+  esc    XX   XX     XX    XX    XX    XX    XX    XX    XX    XX    XX    XX
+  S-grv  XX    XX    XX    XX    XX    XX    XX    XX    XX    XX    -     =     bspc
+  grv    S-1   S-9   S-0   S-2   XX    XX    1     2     3     \     XX    XX    XX
+  XX     [     ]     S-[   S-]   XX    XX    4     5     6     .     XX    ret
+  lsft   S-7   S-8   S-4   S-3   XX    XX    7     8     9     /     XX   rsft
+        lctl  lalt lmet             0        rmet     ralt ◀    ▼    ▶
+)
+
+(defalias
+  mwu (mwheel-up 50 120)
+  mwd (mwheel-down 50 120)
+  mwl (mwheel-left 50 120)
+  mwr (mwheel-right 50 120)
+
+  ma↑ (movemouse-accel-up 5 1000 1 3)
+  ma← (movemouse-accel-left 5 1000 1 3)
+  ma↓ (movemouse-accel-down 5 1000 1 3)
+  ma→ (movemouse-accel-right 5 1000 1 3)
+
+  sm (setmouse 32228 32228)
+
+  fst (movemouse-speed 200)
+)
+
+;; Mouse and arrow layer
+(deflayer mouse
+  esc    XX    XX    XX    XX    XX    XX     XX    XX    XX    XX    XX    XX           ;; function row
+  grv    XX    XX    XX    XX    XX    XX     XX    XX    XX    XX    XX    XX    bspc   ;; number row
+  tab    XX    XX    ▲     XX    XX    @mwl   @mwd  @mwu  @mwr  XX    XX    XX    XX     ;; top letter row
+  caps   XX    ◀     ▼     ▶     XX    @ma←   @ma↓  @ma↑  @ma→  XX    XX    mrtp         ;; home row
+  lsft   XX    XX    XX    XX    XX    XX     XX    XX    XX    XX    XX   rsft          ;; bottom letter row
+        lctl  lalt lmet          mltp           rmet ralt XX    XX    XX                 ;; control row
+)

env/.config/kanata/voyager.kbd

@@ -0,0 +1,156 @@
+;; ZSA Voyager configuration file.
+;;
+
+;; Adapted from https://github.com/linkarzu/dotfiles-latest/blob/main/kanata/configs/macbook-subl.kbd
+;; Video related to this file
+;; https://youtu.be/jvJ3f4HHiMY
+
+;; Kanata docs
+;; https://github.com/jtroo/kanata/blob/main/docs/config.adoc
+
+;; OS key code mappings
+;; https://github.com/jtroo/kanata/blob/main/parser/src/keys/mod.rs
+
+(defcfg
+  process-unmapped-keys yes
+  log-layer-changes no
+  danger-enable-cmd yes
+  concurrent-tap-hold yes
+  rapid-event-delay 3
+  allow-hardware-repeat false
+
+  ;; When any non-chord activation happens, this timeout begins. Until this timeout expires
+  ;; all inputs will immediately skip chords processing and be processed by the active layer.
+  ;; chords-v2-min-idle 250
+)
+
+;; Variables
+(defvar
+ tap-higher 400
+ tap-time 150
+ tap-time-plus 300
+ hold-time-plus 300
+ hold-time 200
+ chord-time 60
+ subl-time 200
+ tmux-delay 40
+)
+
+;; Only one defsrc is allowed.
+;;
+;; defsrc defines the keys that will be intercepted by kanata. The order of the
+;; keys matches with deflayer declarations and all deflayer declarations must
+;; have the same number of keys as defsrc. Any keys not listed in defsrc will
+;; be passed straight to the operating system.
+(defsrc
+;;----------------LEFT-------------------;------------------RIGHT-------------------;;
+  =      1    2    3    4    5                6    7    8    9    0    -
+  grv    q    w    e    r    t                y    u    i    o    p    \
+  esc    a    s    d    f    g                h    j    k    l    ;    '
+  lsft   z    x    c    v    b                n    m    ,    .    /    rsft
+                            ret tab     bspc spc
+)
+
+(defalias
+  ;; Modifier keys - Left
+  mlctl (tap-hold $tap-time $hold-time a lctl)
+  mlalt (tap-hold $tap-time $hold-time s lalt)
+  mlmet (tap-hold $tap-time $hold-time d lmet)
+  mlsft (tap-hold $tap-time $hold-time f lsft)
+
+  ;; Modifier keys - Right
+  mrsft (tap-hold $tap-time $hold-time j rsft)
+  mrmet (tap-hold $tap-time $hold-time k rmet)
+  mralt (tap-hold $tap-time $hold-time l ralt)
+  mrctl (tap-hold $tap-time $hold-time ; rctl)
+
+  mretu (tap-hold $tap-time $hold-time tab ret)
+
+  ;; number and symbols layer trigger keys.
+  mlnums (tap-hold-press $tap-time-plus $hold-time-plus ret (layer-while-held nums_and_symbols))
+  mrnums (tap-hold-press $tap-time-plus $hold-time-plus spc (layer-while-held nums_and_symbols))
+
+  ;; mouse layer trigger keys.
+  mlms (tap-hold-press $tap-time $hold-time esc (layer-while-held mouse))
+  mrms (tap-hold-press $tap-time $hold-time ' (layer-while-held mouse))
+
+  ;; Multi
+  mhypr (tap-hold $tap-time $hold-time bspc (multi lsft lctl lalt lmet)) ;; Hyper key
+
+  ;; Sublayers
+  ;; I implemented sublayers thanks to the help in this discussion
+  ;; https://github.com/jtroo/kanata/discussions/1765
+  ;; DO NOT USE THE SUBLAYERS IN A FREQUENTLY PRESSED KEY LIKE SPACEBAR
+  ;; It made typing spaces a pain in the ass, enter is not pressed to often, so it works way better
+  ;; msubl (tap-hold-press $subl-time $subl-time ret (layer-while-held sublayers))
+
+  ;; Execute script
+  ;; maltt (cmd open "btt://execute_assigned_actions_for_trigger/?uuid=F35EF770-FAA5-448A-957D-70BB449DEB0F")
+
+  ;; key and script at the same time
+  ;; maltt (tap-hold $tap-time $hold-time lsft (cmd open "btt://execute_assigned_actions_for_trigger/?uuid=F35EF770-FAA5-448A-957D-70BB449DEB0F"))
+)
+
+;; BLANK LAYER
+;; (deflayer {{NAME}}
+;;;;----------------LEFT-------------------;------------------RIGHT-------------------;;
+;;   =      1    2    3    4    5                  6    7    8    9    0    -
+;;   grv    q    w    e    r    t                  y    u    i    o    p    \
+;;   esc    a    s    d    f    g                  h    j    k    l    ;    '
+;;   lsft   z    x    c    v    b                  n    m    ,    .    /    rsft
+;;                             ret  tab      bspc spc 
+;; )
+
+;; Main layer
+(deflayer main
+;;----------------LEFT----------------------------;-------------------------RIGHT---------------------------;;
+  =      1       2      3      4       5                      6      7       8       9       0       -
+  grv    q       w      e      r       t                      y      u       i       o       p       \
+  @mlms  @mlctl  @mlalt @mlmet @mlsft  g                      h      @mrsft  @mrmet  @mralt  @mrctl  @mrms
+  lsft   z       x      c      v       b                      n      m       ,       .       /        rsft
+                                    @mlnums tab     @mhypr @mrnums
+)
+
+(defalias
+  ;; Number layer modifier keys - Left
+  nlctl (tap-hold $tap-time $hold-time [ lctl)
+  nlalt (tap-hold $tap-time $hold-time ] lalt)
+  nlmet (tap-hold $tap-time $hold-time S-[ lmet)
+  nlsft (tap-hold $tap-time $hold-time S-] lsft)
+)
+
+;; Number and Symbols layer
+(deflayer nums_and_symbols
+;;----------------LEFT---------------------------------;-------------------RIGHT-------------------;;
+  =      XX      XX     XX     XX        XX                    XX     XX   XX   XX   XX   -
+  S-grv  S-1     S-9    S-0    S-2       XX                    -      1    2    3    \    \
+  XX     @nlctl  @nlalt @nlmet @nlsft    XX                    S-=    4    5    6    .    '
+  lsft   S-7     S-8    S-3    S-4       XX                    S-8    7    8    9    /    rsft
+                                         @mlnums tab       @mhypr 0
+)
+
+(defalias
+  mwu (mwheel-up 50 120)
+  mwd (mwheel-down 50 120)
+  mwl (mwheel-left 50 120)
+  mwr (mwheel-right 50 120)
+
+  ma↑ (movemouse-accel-up 5 1000 1 3)
+  ma← (movemouse-accel-left 5 1000 1 3)
+  ma↓ (movemouse-accel-down 5 1000 1 3)
+  ma→ (movemouse-accel-right 5 1000 1 3)
+
+  sm (setmouse 32228 32228)
+
+  fst (movemouse-speed 200)
+)
+
+;; Mouse and arrow layer
+(deflayer mouse
+;;----------------LEFT-------------------;------------------RIGHT-------------------;;
+  XX     brdn bru  XX   XX   XX                  XX    XX    mute  vold   volu    XX
+  XX     XX   XX   ▲    XX   XX                  @mwl  @mwd  @mwu  @mwr   XX      XX
+  XX     XX   ◀    ▼    ▶    XX                  @ma←  @ma↓  @ma↑  @ma→   XX      XX
+  XX     XX   XX   XX   XX   XX                  XX    XX    XX    XX     XX      XX
+                             ret  tab      mltp mrtp 
+)

env/.config/nvim/.gitignore

@@ -1,8 +0,0 @@
-tt.*
-.tests
-doc/tags
-debug
-.repro
-foo.*
-*.log
-data

env/.config/nvim/.neoconf.json

@@ -1,15 +0,0 @@
-{
-  "neodev": {
-    "library": {
-      "enabled": true,
-      "plugins": true
-    }
-  },
-  "neoconf": {
-    "plugins": {
-      "lua_ls": {
-        "enabled": true
-      }
-    }
-  }
-}

env/.config/nvim/LICENSE

@@ -1,201 +0,0 @@
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.

env/.config/nvim/README.md

@@ -1,4 +0,0 @@
-# 💤 LazyVim
-
-A starter template for [LazyVim](https://github.com/LazyVim/LazyVim).
-Refer to the [documentation](https://lazyvim.github.io/installation) to get started.

env/.config/nvim/after/ftplugin/markdown.lua

@@ -1,20 +0,0 @@
--- Markdown specific key maps.
---
-local todos = require("todo-comments")
-local keywords = { "WARN", "WARNING", "IMPORTANT" }
-
--- Show all the warnings in the quick fix list.
-vim.keymap.set(
-	"n",
-	"<leader>tw",
-	"<CMD>Trouble todo toggle filter = {tag = {WARN, IMPORTANT}}<CR>",
-	{ desc = "[T]odo [W]arnings" }
-)
-
-vim.keymap.set("n", "]w", function()
-	todos.jump_next({ keywords = keywords })
-end, { desc = "Next [W]arning" })
-
-vim.keymap.set("n", "[w", function()
-	todos.jump_prev({ keywords = keywords })
-end, { desc = "Previous [W]arning" })

env/.config/nvim/after/ftplugin/swift.lua

@@ -1,2 +0,0 @@
-vim.opt.tabstop = 2
-vim.opt.shiftwidth = 2

env/.config/nvim/init.lua

@@ -1,15 +0,0 @@
--- bootstrap lazy.nvim, LazyVim and your plugin
-vim.g.netrw_browsex_viewer = "xdg-open"
-
-require("config.lazy")
-
-vim.filetype.add({
-  pattern = {
-    [".*"] = function(path, bufnr)
-      local first_line = vim.api.nvim_buf_get_lines(bufnr, 0, 1, false)[1] or ""
-      if first_line:match("^#!.*zsh") then
-        return "bash"
-      end
-    end,
-  },
-})

env/.config/nvim/lazyvim.json

@@ -1,27 +0,0 @@
-{
-  "extras": [
-    "lazyvim.plugins.extras.coding.mini-snippets",
-    "lazyvim.plugins.extras.coding.mini-surround",
-    "lazyvim.plugins.extras.editor.fzf",
-    "lazyvim.plugins.extras.editor.harpoon2",
-    "lazyvim.plugins.extras.formatting.prettier",
-    "lazyvim.plugins.extras.lang.ansible",
-    "lazyvim.plugins.extras.lang.clangd",
-    "lazyvim.plugins.extras.lang.cmake",
-    "lazyvim.plugins.extras.lang.docker",
-    "lazyvim.plugins.extras.lang.git",
-    "lazyvim.plugins.extras.lang.json",
-    "lazyvim.plugins.extras.lang.markdown",
-    "lazyvim.plugins.extras.lang.sql",
-    "lazyvim.plugins.extras.lang.tailwind",
-    "lazyvim.plugins.extras.lang.tex",
-    "lazyvim.plugins.extras.lang.toml",
-    "lazyvim.plugins.extras.lang.yaml",
-    "lazyvim.plugins.extras.util.startuptime"
-  ],
-  "install_version": 8,
-  "news": {
-    "NEWS.md": "11866"
-  },
-  "version": 8
-}

env/.config/nvim/lua/config/autocmds.lua

@@ -1,76 +0,0 @@
-local defaultGroupOptions = { clear = true }
-local markdownGroup = vim.api.nvim_create_augroup("MyMarkdownGroup", defaultGroupOptions)
-local createCmd = vim.api.nvim_create_autocmd
-
-createCmd("BufEnter", {
-  pattern = "*.md",
-  group = markdownGroup,
-  callback = function(_)
-    -- HACK: Set filetype to markdown for '.md' files.
-    -- Not sure why it doesn't detect these as markdown files, but this fixes the issue.
-    vim.cmd.setlocal("filetype=markdown")
-    vim.cmd.setlocal("textwidth=120")
-    vim.cmd.setlocal("spell spelllang=en_us")
-  end,
-})
-
--- Hyprlang LSP
-vim.api.nvim_create_autocmd({ "BufEnter", "BufWinEnter" }, {
-  pattern = { "*.hl", "hypr*.conf" },
-  callback = function(event)
-    print(string.format("starting hyprls for %s", vim.inspect(event)))
-    vim.lsp.start({
-      name = "hyprlang",
-      cmd = { "hyprls" },
-      root_dir = vim.fn.getcwd(),
-    })
-  end,
-})
-
--- Markdown
--- createCmd("BufWritePost", {
---   pattern = { "*.md", "*.markdown" },
---   group = markdownGroup,
---   callback = function(_)
---     -- local cursor = vim.fn.getpos(".")
---     vim.cmd("FormatWrite")
---     -- vim.fn.setpos(".", cursor)
---   end,
--- })
-
--- Go
-createCmd("BufWritePre", {
-  pattern = "*.go",
-  callback = function()
-    require("go.format").goimport()
-  end,
-  group = vim.api.nvim_create_augroup("GoFormat", defaultGroupOptions),
-})
-
--- GoPass
-vim.api.nvim_exec2(
-  [[
-  autocmd BufNewFile,BufRead /private/**/gopass** setlocal noswapfile nobackup noundofile shada=""
-  ]],
-  {}
-)
-
--- Highlight when yanking.
-createCmd("TextYankPost", {
-  desc = "Highlight when yanking text.",
-  group = vim.api.nvim_create_augroup("highlight-yank", { clear = true }),
-  callback = function()
-    vim.highlight.on_yank()
-  end,
-})
-
--- Force zsh scripts to use bash syntax hyighlighting.
-vim.api.nvim_create_autocmd({ "BufRead", "BufNewFile" }, {
-  pattern = "*",
-  callback = function(args)
-    local first_line = vim.api.nvim_buf_get_lines(args.buf, 0, 1, false)[1] or ""
-    if first_line:match("^#!.*zsh") then
-      vim.bo[args.buf].filetype = "bash"
-    end
-  end,
-})

env/.config/nvim/lua/config/keymaps.lua

@@ -1,54 +0,0 @@
--- Keymaps are automatically loaded on the VeryLazy event
--- Default keymaps that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/keymaps.lua
--- Add any additional keymaps here
-
-local keymap = vim.keymap.set
-local default_options = { noremap = true, silent = true }
-local wk = require("which-key")
-
-local wk_add = function(mode, keymaps)
-  wk.add(keymaps, { mode = mode, silent = true })
-end
-
-keymap("i", "jk", "<ESC>", default_options)
-
-local make_executable = function()
-  local file = vim.fn.expand("%:p")
-  vim.cmd("silent !chmod +x " .. file)
-  print("Made " .. file .. " executable")
-end
-
---------------------------------------------------------------------------------
--- Normal Mode
---------------------------------------------------------------------------------
-wk_add("n", {
-  { "<Left>", ":vertical resize +1<CR>", desc = "Resize Pane Left" },
-  { "<Right>", ":vertical resize -1<CR>", desc = "Resize Pane Right" },
-  { "<Up>", "resize -1<CR>", desc = "Resize Pane Up" },
-  { "<Down>", "resize +1<CR>", desc = "Resize Pane Down" },
-
-  { "<leader>n", "<CMD>:noh<CR>", desc = "[N]o highlighting" },
-  { "<leader>s", "<CMD>:set spell!<CR>", desc = "[S]pell check toggle" },
-  { "<C-s>", "<CMD>:write<CR>", desc = "[S]ave" },
-
-  { "J", ":move .+1<CR>==", desc = "Move line down" },
-  { "K", ":move .-2<CR>==", desc = "Move line up" },
-
-  { "<leader>x", make_executable, desc = "Make current file e[x]ecutable" },
-  { "<leader>z", "<CMD>:ZenMode<CR>", desc = "[Z]en Mode" },
-})
-
---------------------------------------------------------------------------------
--- Visual Mode
---------------------------------------------------------------------------------
-
-vim.keymap.set("v", "K", ":move '<-2<CR>gv=gv", { desc = "Move selected block up.", silent = true, noremap = true })
-vim.keymap.set("v", "J", ":move '>+1<CR>gv=gv", { desc = "Move selected block up.", silent = true, noremap = true })
-
--- Toggle term key maps, that get attached when terminal is opened.
-function _G.set_terminal_keymaps()
-  local opts = { buffer = 0 }
-  keymap("t", "<esc>", [[<C-\><C-n>]], opts)
-end
-
-vim.cmd("autocmd! TermOpen term://* lua set_terminal_keymaps()")

env/.config/nvim/lua/config/lazy.lua

@@ -1,69 +0,0 @@
-local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
-if not (vim.uv or vim.loop).fs_stat(lazypath) then
-  local lazyrepo = "https://github.com/folke/lazy.nvim.git"
-  local out = vim.fn.system({ "git", "clone", "--filter=blob:none", "--branch=stable", lazyrepo, lazypath })
-  if vim.v.shell_error ~= 0 then
-    vim.api.nvim_echo({
-      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
-      { out,                            "WarningMsg" },
-      { "\nPress any key to exit..." },
-    }, true, {})
-    vim.fn.getchar()
-    os.exit(1)
-  end
-end
-vim.opt.rtp:prepend(lazypath)
-
-require("lazy").setup({
-  spec = {
-    -- add LazyVim and import its plugins
-    { "LazyVim/LazyVim", import = "lazyvim.plugins" },
-    {
-      import = "lazyvim.plugins.extras.editor.mini-files",
-      opts = {
-        options = {
-          use_as_default_explorer = true,
-        },
-      },
-    },
-    {
-      import = "lazyvim.plugins.extras.coding.blink",
-      keymap = {
-        preset = "enter",
-        ["<C-y>"] = { "select_and_accept" },
-      },
-    },
-
-    -- import/override with your plugins
-    { import = "plugins" },
-  },
-  defaults = {
-    -- By default, only LazyVim plugins will be lazy-loaded. Your custom plugins will load during startup.
-    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
-    lazy = false,
-    -- It's recommended to leave version=false for now, since a lot the plugin that support versioning,
-    -- have outdated releases, which may break your Neovim install.
-    version = false, -- always use the latest git commit
-    -- version = "*", -- try installing the latest stable version for plugins that support semver
-  },
-  install = { colorscheme = { "tokyonight", "habamax" } },
-  checker = {
-    enabled = true, -- check for plugin updates periodically
-    notify = false, -- notify on update
-  },                -- automatically check for plugin updates
-  performance = {
-    rtp = {
-      -- disable some rtp plugins
-      disabled_plugins = {
-        "gzip",
-        -- "matchit",
-        -- "matchparen",
-        -- "netrwPlugin",
-        "tarPlugin",
-        "tohtml",
-        "tutor",
-        "zipPlugin",
-      },
-    },
-  },
-})

env/.config/nvim/lua/config/options.lua

@@ -1,72 +0,0 @@
--- Options are automatically loaded before lazy.nvim startup
--- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
--- Add any additional options here
---
-local o = vim.opt
-local wo = vim.wo
-local fn = vim.fn
-
-vim.cmd.set("inccommand=split")
-o.filetype = "on"
-o.updatetime = 500 -- faster completion
-o.timeoutlen = 800 -- time to wait for a mapped sequence to complete (in milliseconds)
-o.ttimeoutlen = 300 -- Time in milliseconds to wait for a key code sequence to complete
-o.backup = false -- creates a backup file
-o.swapfile = false -- enable/disable swap file creation
-o.dir = fn.stdpath("data") .. "/swp" -- swap file directory
-o.undofile = false -- enable/disable undo file creation
-o.undodir = fn.stdpath("data") .. "/undodir" -- set undo directory
-o.history = 500 -- Use the 'history' option to set the number of lines from command mode that are remembered.
-o.hidden = true -- required to keep multiple buffers and open multiple buffers
---o.clipboard = "unnamedplus" -- allows neovim to access the system clipboard
-o.fileencoding = "utf-8" -- the encoding written to a file
-o.conceallevel = 0 -- so that `` is visible in markdown files
-o.number = true -- set numbered lines
-o.relativenumber = true -- set relative numbered lines
-o.cmdheight = 1 -- space for displaying messages/commands
-o.showmode = false -- we don't need to see things like -- INSERT -- anymore
-o.showtabline = 2 -- always show tabs
-o.laststatus = 2 --  The value of this option influences when the last window will have a status line (2 always)
-o.smartcase = true -- smart case
-o.smartindent = true -- make indenting smarter again
-o.splitbelow = true -- force all horizontal splits to go below current window
-o.splitright = true -- force all vertical splits to go to the right of current window
-o.autoindent = true -- turn on auto indent.
-o.expandtab = true -- convert tabs to spaces
-o.smarttab = true -- turn on smart tab
-o.shiftwidth = 2 -- the number of spaces inserted for each indentation
-o.tabstop = 2 -- how many columns a tab counts for
-o.termguicolors = true -- set term gui colors (most terminals support this)
-o.cursorline = true -- highlight the current line
-o.scrolloff = 20 -- Minimal number of screen lines to keep above and below the cursor
-o.sidescrolloff = 5 -- The minimal number of columns to scroll horizontally
-o.hlsearch = false -- highlight all matches on previous search pattern
-o.ignorecase = true -- ignore case in search patterns
-o.foldenable = false -- disable folding; enable with zi
-o.foldmethod = "expr"
-o.foldexpr = "nvim_treesitter#foldexpr()"
-vim.cmd.set("nolist") -- don't show listchars.
--- o.listchars = "eol:¬,tab:>·,trail:~,extends:>,precedes:<"
-o.listchars = "eol:¬,tab:>·,trail:~,extends:>,precedes:<,space:␣"
-o.shortmess = o.shortmess + "c" -- prevent "pattern not found" messages
-wo.colorcolumn = "99999"
-o.wildmode = "full"
-o.lazyredraw = false -- do not redraw screen while running macros
-o.grepprg = "rg --hidden --vimgrep --smart-case --"
-o.completeopt = { "menu", "menuone", "noselect", "noinsert" } -- A comma separated list of options for Insert mode completion
-o.wildignorecase = true -- When set case is ignored when completing file names and directories
-o.wildignore = [[
-.git,.hg,.svn
-*.aux,*.out,*.toc
-*.o,*.obj,*.exe,*.dll,*.manifest,*.rbc,*.class
-*.ai,*.bmp,*.gif,*.ico,*.jpg,*.jpeg,*.png,*.psd,*.webp
-*.avi,*.divx,*.mp4,*.webm,*.mov,*.m2ts,*.mkv,*.vob,*.mpg,*.mpeg
-*.mp3,*.oga,*.ogg,*.wav,*.flac
-*.eot,*.otf,*.ttf,*.woff
-*.doc,*.pdf,*.cbr,*.cbz
-*.zip,*.tar.gz,*.tar.bz2,*.rar,*.tar.xz,*.kgb
-*.swp,.lock,.DS_Store,._*
-*/tmp/*,*.so,*.swp,*.zip,**/node_modules/**,**/target/**,**.terraform/**"
-]]
-o.viminfo = "" -- disable viminfo from copying information from current session, for security.
-vim.g.snacks_animate = false

env/.config/nvim/lua/plugins/cmp.lua

@@ -1,8 +0,0 @@
-return {
-  "saghen/blink.cmp",
-  opts = {
-    keymap = {
-      preset = "default"
-    }
-  }
-}

env/.config/nvim/lua/plugins/colorscheme.lua

@@ -1,9 +0,0 @@
-return {
-  { "catppuccin/nvim", name = "catppuccin", priority = 1000 },
-  {
-    "LazyVim/LazyVim",
-    opts = {
-      colorscheme = "catppuccin",
-    },
-  },
-}

env/.config/nvim/lua/plugins/disabled.lua

@@ -1,4 +0,0 @@
-return {
-  { "nvim-neo-tree/neo-tree.nvim", enabled = false },
-  { "akinsho/bufferline.nvim",     enabled = false },
-}

env/.config/nvim/lua/plugins/fidget.lua

@@ -1,23 +0,0 @@
-return {
-  "j-hui/fidget.nvim",
-  event = "VeryLazy",
-  config = function()
-    local fidget = require("fidget")
-    fidget.setup({
-      notification = {
-        window = {
-          normal_hl = "String", -- Base highlight group in the notification window
-          winblend = 0, -- Background color opacity in the notification window
-          border = "rounded", -- Border around the notification window
-          zindex = 45, -- Stacking priority of the notification window
-          max_width = 0, -- Maximum width of the notification window
-          max_height = 0, -- Maximum height of the notification window
-          x_padding = 1, -- Padding from right edge of window boundary
-          y_padding = 1, -- Padding from bottom edge of window boundary
-          align = "bottom", -- How to align the notification window
-          relative = "editor", -- What the notification window position is relative to
-        },
-      },
-    })
-  end,
-}

env/.config/nvim/lua/plugins/formatter.lua

@@ -1,30 +0,0 @@
-return {
-  "stevearc/conform.nvim",
-  opts = {
-    formatters = {
-      ["markdown-toc"] = {
-        condition = function(_, ctx)
-          for _, line in ipairs(vim.api.nvim_buf_get_lines(ctx.buf, 0, -1, false)) do
-            if line:find("<!%-%- toc %-%->") then
-              return true
-            end
-          end
-        end,
-      },
-      ["markdownlint-cli2"] = {
-        condition = function(_, ctx)
-          local diag = vim.tbl_filter(function(d)
-            return d.source == "markdownlint"
-          end, vim.diagnostic.get(ctx.buf))
-          return #diag > 0
-        end,
-      },
-    },
-    formatters_by_ft = {
-      ["markdown"] = { "prettier", "markdownlint-cli2", "markdown-toc" },
-      ["markdown.mdx"] = { "prettier", "markdownlint-cli2", "markdown-toc" },
-      lua = { "stulua" },
-      swift = { "swiftformat" },
-    },
-  },
-}

env/.config/nvim/lua/plugins/harpoon.lua

@@ -1,78 +0,0 @@
-return {
-  {
-    "ThePrimeagen/harpoon",
-    branch = "harpoon2",
-    opts = {
-      settings = {
-        save_on_toggle = true,
-        sync_on_ui_close = true,
-      },
-    },
-    keys = {
-      {
-        "<C-e>",
-        function()
-          require("harpoon").ui:toggle_quick_menu(require("harpoon"):list())
-        end,
-        desc = "Open Harpoon window.",
-      },
-      {
-        "<leader>a",
-        function()
-          require("harpoon"):list():add()
-        end,
-        desc = "[A]dd to the harpoon list.",
-      },
-      {
-        "<A-y>",
-        function()
-          require("harpoon"):list():select(1)
-        end,
-        desc = "Select first harpoon buffer.",
-      },
-      {
-        "<A-u>",
-        function()
-          require("harpoon"):list():select(2)
-        end,
-        desc = "Select second harpoon buffer.",
-      },
-      {
-        "<A-i>",
-        function()
-          require("harpoon"):list():select(3)
-        end,
-        desc = "Select third harpoon buffer.",
-      },
-      {
-        "<A-o>",
-        function()
-          require("harpoon"):list():select(4)
-        end,
-        desc = "Select fourth harpoon buffer.",
-      },
-      {
-        "<C-[>",
-        function()
-          require("harpoon"):list():prev()
-        end,
-        desc = "Previous harpoon buffer.",
-      },
-      {
-        "<C-]>",
-        function()
-          require("harpoon"):list():next()
-        end,
-        desc = "Next harpoon buffer.",
-      },
-      -- Extensions
-      require("harpoon"):extend({
-        UI_CREATE = function(cx)
-          vim.keymap.set("n", "<C-v>", function()
-            require("harpoon").ui:select_menu_item({ vsplit = true })
-          end, { buffer = cx.buffer, desc = "Open in [V]split" })
-        end,
-      }),
-    },
-  },
-}

env/.config/nvim/lua/plugins/init.lua

@@ -1,29 +0,0 @@
--- Plugins that don't require much configuration are in here.
---
-return {
-  {
-    "folke/snacks.nvim",
-    opts = {
-      indent = { enabled = false },
-    },
-  },
-  {
-    "christoomey/vim-tmux-navigator",
-    lazy = false,
-    cmd = {
-      "TmuxNavigateLeft",
-      "TmuxNavigateDown",
-      "TmuxNavigateUp",
-      "TmuxNavigateRight",
-      "TmuxNavigatePrevious",
-      "TmuxNavigatorProcessList",
-    },
-    keys = {
-      { "<c-h>", "<cmd><C-U>TmuxNavigateLeft<cr>" },
-      { "<c-j>", "<cmd><C-U>TmuxNavigateDown<cr>" },
-      { "<c-k>", "<cmd><C-U>TmuxNavigateUp<cr>" },
-      { "<c-l>", "<cmd><C-U>TmuxNavigateRight<cr>" },
-      { "<c-\\>", "<cmd><C-U>TmuxNavigatePrevious<cr>" },
-    },
-  },
-}

env/.config/nvim/lua/plugins/lint.lua

@@ -1,12 +0,0 @@
-return {
-  {
-    "mfussenegger/nvim-lint",
-    opts = {
-      linters = {
-        markdownlint = {
-          args = { "--config", "~/.markdownlint.jsonc", "--" },
-        },
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/lsp.lua

@@ -1,169 +0,0 @@
-return {
-  {
-    "mason-org/mason.nvim",
-    dependencies = {
-      "neovim/nvim-lspconfig",
-    },
-    opts = {
-      ensure_installed = {
-        "clangd",
-        "marksman",
-        "shfmt",
-        "tinymist",
-      },
-    },
-  },
-  {
-    "nvim-treesitter/nvim-treesitter",
-    opts = {
-      ensure_installed = {
-        "bash",
-        "cmake",
-        "dockerfile",
-        "editorconfig",
-        "ini",
-        "jq",
-        "latex",
-        "make",
-      },
-    },
-  },
-  {
-    "neovim/nvim-lspconfig",
-    event = { "BufReadPre", "BufNewFile" },
-    opts = {
-      servers = {
-        bashls = {},
-        clangd = {},
-        dockerls = {},
-        gopls = {},
-        harper_ls = {},
-        jsonls = {},
-        lua_ls = {
-          settings = {
-            Lua = {
-              runtime = {
-                version = "LuaJIT",
-              },
-              diagnostics = {
-                globals = { "vim" },
-              },
-              workspace = {
-                library = vim.api.nvim_get_runtime_file("", true),
-              },
-              telemetry = {
-                enable = false,
-              },
-            },
-          },
-        },
-        marksman = {},
-        sourcekit = {},
-        tinymist = {
-          settings = {
-            formatterMode = "typstyle",
-          },
-        },
-        yamlls = {},
-      },
-      setup = {
-        clangd = function(_, opts)
-          opts.capabilities.offsetEncoding = { "utf-16" }
-        end,
-        sourcekit = function(_, opts)
-          opts.cmd = {
-            vim.trim(vim.fn.system("xcrun -f sourcekit-lsp")) or nil,
-          }
-        end,
-      },
-    },
-  },
-}
-
--- return {
---   "neovim/nvim-lspconfig",
---   event = { "BufReadPre", "BufNewFile" },
---   dependencies = {
---     "hrsh7th/cmp-nvim-lsp",
---     { "antosha417/nvim-lsp-file-operations", config = true },
---     "williamboman/mason.nvim",
---     "williamboman/mason-lspconfig.nvim",
---     {
---       "folke/lazydev.nvim",
---       ft = "lua",
---       opts = {
---         library = {
---           { path = "${3rd}/luv/library", words = { "vim%.uv" } },
---         },
---       },
---     },
---   },
---   config = function()
---     require("mason").setup()
---     require("mason-lspconfig").setup({
---       opts = {
---         ensure_installed = lsp_servers,
---       },
---     })
---     local lspconfig = require("lspconfig")
---     local cmp_nvim_lsp = require("cmp_nvim_lsp")
---     local capabilities = cmp_nvim_lsp.default_capabilities()
---     local opts = { noremap = true, silent = true }
---     local on_attach = function(_, bufnr)
---       opts.buffer = bufnr
---
---       opts.desc = "Show line diagnostics"
---       vim.keymap.set("n", "<leader>d", vim.diagnostic.open_float, opts)
---
---       opts.desc = "Show diagnostics in Telescope"
---       vim.keymap.set("n", "<leader><leader>d", "<CMD>Telescope diagnostics bufnr=0<CR>", opts)
---
---       opts.desc = "Show documentation for what is under cursor"
---       vim.keymap.set("n", "<C-k>", vim.lsp.buf.hover, opts)
---
---       opts.desc = "[G]oto [D]efinition"
---       vim.keymap.set("n", "gd", "<cmd>Telescope lsp_definitions trim_text=true<cr>", opts)
---
---       opts.desc = "[G]oto [D]eclaration"
---       vim.keymap.set("n", "gD", vim.lsp.buf.declaration, opts)
---
---       opts.desc = "LSP [C]ode [A]ction"
---       vim.keymap.set("n", "<leader>ca", vim.lsp.buf.code_action, opts)
---
---       --opts.desc = "[R]e-[N]ame"
---       --vim.keymap.set("n", "<leader>rn", vim.lsp.buf.rename, opts)
---
---       opts.desc = "[R]eload or start LSP"
---       vim.keymap.set("n", "<leader>rl", ":LspRestart | :LspStart<CR>", opts)
---
---       opts.desc = "Goto previous diagnostic"
---       vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, opts)
---
---       opts.desc = "Goto next diagnostic"
---       vim.keymap.set("n", "]d", vim.diagnostic.goto_next, opts)
---     end
---
---     for _, lsp in ipairs(lsp_servers) do
---       lspconfig[lsp].setup({
---         capabilities = capabilities,
---         on_attach = on_attach,
---         on_init = function(client)
---           -- HACK: to fix some issues with LSP
---           -- more details: https://github.com/neovim/neovim/issues/19237#issuecomment-2237037154
---           client.offset_encoding = "utf-8"
---         end,
---         cmd = lsp == "sourcekit" and { vim.trim(vim.fn.system("xcrun -f sourcekit-lsp")) } or nil,
---       })
---     end
---
---     -- nice icons
---     local signs = { Error = " ", Warn = " ", Hint = "󰠠 ", Info = " " }
---     for type, icon in pairs(signs) do
---       local hl = "DiagnosticSign" .. type
---       vim.fn.sign_define(hl, { text = icon, texthl = hl, numhl = "" })
---     end
---
---     -- For some reason I was having trouble getting this to work inside the on-attach, so it's here.
---     vim.keymap.set("n", "<leader>rn", vim.lsp.buf.rename, { desc = "[R]e-[N]ame" })
---   end,
--- }

env/.config/nvim/lua/plugins/luasnip.lua

@@ -1,39 +0,0 @@
-return {
-  {
-    "L3MON4D3/LuaSnip",
-    opts = function()
-      LazyVim.cmp.actions.snippet_forward = function()
-        if require("luasnip").jumpable(1) then
-          require("luasnip").jump(1)
-          return true
-        end
-      end
-      LazyVim.cmp.actions.snippet_stop = function()
-        if require("luasnip").expand_or_jumpable() then -- or just jumpable(1) is fine?
-          require("luasnip").unlink_current()
-          return true
-        end
-      end
-    end,
-    keys = {
-      {
-        "<C-k>",
-        mode = { "i", "s" },
-        function()
-          if ls.expand_or_jumpable() then
-            ls.expand_or_jump()
-          end
-        end
-      },
-      {
-        "<C-j>",
-        mode = { "i", "s" },
-        function()
-          if ls.jumpable(-1) then
-            ls.jump(-1)
-          end
-        end
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/oil.lua

@@ -1,40 +0,0 @@
-return {
-  "stevearc/oil.nvim",
-  event = "VeryLazy",
-  dependencies = {
-    "nvim-tree/nvim-web-devicons",
-  },
-  opts = {
-    columns = { "icon" },
-    keymaps = {
-      ["<C-h>"] = false,
-      ["<M-h>"] = "actions.select_split",
-      ["<C-v>"] = {
-        "actions.select",
-        opts = { vertical = true },
-        desc = "Open the entry in a vertical split",
-      },
-      view_options = {
-        show_hidden = true,
-        is_hidden_file = function(name, _) -- second arg is bufnr, but not currently used.
-          -- Don't show .DS_Store in output.
-          -- local is_ds_store = name ~= ".DS_Store"
-          -- return not is_ds_store
-          return false
-        end,
-      },
-    },
-  },
-  keys = {
-    -- Show the parent directory in current window.
-    { "-", "<CMD>Oil<CR>", desc = "Open parent directory." },
-    -- Open parent directory in floating window.
-    {
-      "<space>-",
-      function()
-        require("oil").toggle_float()
-      end,
-      desc = "Open parent directory in floating window.",
-    },
-  },
-}

env/.config/nvim/lua/plugins/snacks.lua

@@ -1,47 +0,0 @@
--- NOTE: Header looks jacked up here, but fine when rendered in the ui.
-return {
-  "folke/snacks.nvim",
-  opts = {
-    picker = {
-      hidden = true,
-      ignored = true
-    },
-    image = {
-      doc = {
-        enabled = true,
-      },
-    },
-    dashboard = {
-      row = nil,
-      col = nil,
-      preset = {
-        header = [[
-        *
-       +++++
-      +++++++++
-     ==+++++++++++
-    +===:+++++++++++*
-          +======--+++++++++++*##+====
-        +==========:=+++++++++++#+====
-       +=============-=++++++++++++====
-       +================-:+++++++++++++==
-      +===================--++++++++++++++*
-     +======================--+++++++++++++++*
-    =========================-++++++++++++++++
-    ==========================:+++++++++++++++
-    ===========================:++++++++++++++
-    ===========================-.-++++++++++++
-    ===========================-::.=++++++++++
-    ===========================----..=++++++++
-    ===========================------..:=+++++
-    ===========================--------:...-++
-    ===========================------------:.:
-    ===========================---------------
-    ===========================---------------
-    ===========================---------------
-]],
-      },
-
-    },
-  },
-}

env/.config/nvim/lua/plugins/telescope.lua

@@ -1,11 +0,0 @@
-return {
-  {
-    import = "lazyvim.plugins.extras.editor.telescope",
-    enabled = false,
-    opts = {
-      ensure_installed = {
-        "swift",
-      },
-    },
-  },
-}

env/.config/nvim/lua/plugins/todo-comment.lua

@@ -1,14 +0,0 @@
-return {
-  "folke/todo-comments.nvim",
-  dependencies = {
-    "nvim-lua/plenary.nvim",
-    "folke/trouble.nvim",
-  },
-  keys = {
-    { "<leader>xt", false },
-    { "<leader>xT", false },
-    { "<leader>tq", "<CMD>Trouble todo toggle<CR>", desc = "[T]odo [Q]uick fix list." },
-    { "<leader><leader>t", "<CMD>TodoTelescope<CR>", desc = "[T]odo telescope list." },
-    { "<leader>tl", "<CMD>TodoLocList<CR>", desc = "[T]odo [L]ocation list." },
-  },
-}

env/.config/nvim/lua/plugins/typst-preview.lua

@@ -1,15 +0,0 @@
-return {
-  'chomosuke/typst-preview.nvim',
-  ft = 'typst', -- or ft = 'typst'
-  version = '1.*',
-  opts = {
-    debug = true,
-  }, -- lazy.nvim will implicitly calls `setup {}`
-  keys = {
-    {
-      "<leader>tp",
-      "<CMD>TypstPreviewToggle<CR>",
-      desc = "Toggle typst preview."
-    },
-  }
-}

env/.config/nvim/lua/plugins/xcodebuild.lua

@@ -1,73 +0,0 @@
-local progress_handle
-
-return {
-  "wojciech-kulik/xcodebuild.nvim",
-  event = "VeryLazy",
-  dependencies = {
-    "nvim-telescope/telescope.nvim",
-    "MunifTanjim/nui.nvim",
-  },
-  opts = {
-    show_build_progress_bar = false,
-    logs = {
-      auto_open_on_success_tests = false,
-      auto_open_on_failed_tests = false,
-      auto_open_on_success_build = false,
-      auto_open_on_failed_build = false,
-      auto_focus = false,
-      auto_close_on_app_launch = true,
-      only_summary = true,
-      notify = function(message, severity)
-        local fidget = require("fidget")
-        if progress_handle then
-          progress_handle.message = message
-          if not message:find("Loading") then
-            progress_handle:finish()
-            progress_handle = nil
-            if vim.trim(message) ~= "" then
-              fidget.notify(message, severity)
-            end
-          end
-        else
-          fidget.notify(message, severity)
-        end
-      end,
-      notify_progress = function(message)
-        local progress = require("fidget.progress")
-
-        if progress_handle then
-          progress_handle.title = ""
-          progress_handle.message = message
-        else
-          progress_handle = progress.handle.create({
-            message = message,
-            lsp_client = { name = "xcodebuild.nvim" },
-          })
-        end
-      end,
-    },
-    code_coverage = {
-      enabled = true,
-    },
-  },
-  keys = {
-    { "<leader>X",  "<cmd>XcodebuildPicker<cr>",                 desc = "Show Xcodebuild Actions" },
-    { "<leader>xf", "<cmd>XcodebuildProjectManager<cr>",         desc = "Show Project Manager Actions" },
-    { "<leader>xb", "<cmd>XcodebuildBuild<cr>",                  desc = "Build Project" },
-    { "<leader>xB", "<cmd>XcodebuildBuildForTesting<cr>",        desc = "Build For Testing" },
-    { "<leader>xr", "<cmd>XcodebuildBuildRun<cr>",               desc = "Build & Run Project" },
-    { "<leader>xt", "<cmd>XcodebuildTest<cr>",                   desc = "Run Tests" },
-    { "<leader>xt", "<cmd>XcodebuildTestSelected<cr>",           desc = "Run Selected Tests" },
-    { "<leader>xT", "<cmd>XcodebuildTestClass<cr>",              desc = "Run This Test Class" },
-    { "<leader>xl", "<cmd>XcodebuildToggleLogs<cr>",             desc = "Toggle Xcodebuild Logs" },
-    { "<leader>xc", "<cmd>XcodebuildToggleCodeCoverage<cr>",     desc = "Toggle Code Coverage" },
-    { "<leader>xC", "<cmd>XcodebuildShowCodeCoverageReport<cr>", desc = "Show Code Coverage Report" },
-    { "<leader>xe", "<cmd>XcodebuildTestExplorerToggle<cr>",     desc = "Toggle Test Explorer" },
-    { "<leader>xs", "<cmd>XcodebuildFailingSnapshots<cr>",       desc = "Show Failing Snapshots" },
-    { "<leader>xd", "<cmd>XcodebuildSelectDevice<cr>",           desc = "Select Device" },
-    { "<leader>xp", "<cmd>XcodebuildSelectTestPlan<cr>",         desc = "Select Test Plan" },
-    { "<leader>xq", "<cmd>Telescope quickfix<cr",                desc = "Show QuickFix List" },
-    { "<leader>xx", "<cmd>XcodebuildQuickfixLine<cr>",           desc = "Quickfix Line" },
-    { "<leader>xa", "<cmd>XcodebuildCodeActions<cr>",            desc = "Show Code Actions" },
-  },
-}

env/.config/nvim/snippets/init.lua

@@ -1,17 +0,0 @@
--- Setup snippets here.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-
-ls.add_snippets("lua", {
-	s("hello", {
-		t('print("hello '),
-		i(1),
-		t(' world")'),
-	}),
-})

env/.config/nvim/snippets/lua.lua

@@ -1,41 +0,0 @@
--- Setup snippets here.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-local fmt = require("luasnip.extras.fmt").fmt
-
-ls.add_snippets("lua", {
-  -- Setup a new snippet file.
-  s("sf", {
-    t({
-      "-- Setup snippets.",
-      'local ls = require("luasnip")',
-      "local s = ls.snippet",
-      "local sn = ls.snippet_node",
-      "local ms = ls.multi_snippet",
-      "local i = ls.insert_node",
-      "local f = ls.function_node",
-      "local c = ls.choice_node",
-      "local t = ls.text_node",
-      "-- Add snippets",
-    }),
-    t('ls.add_snippets("'),
-    i(1, "<file-type>"),
-    t({
-      '", {',
-      "\t-- Define snippets here.",
-      "})",
-    }),
-  }),
-  s("c", {
-    c(1, {
-      fmt("{}", { i(1), t("debug") }),
-      fmt("{}", { i(1), t("warning") }),
-    }),
-  }),
-})

env/.config/nvim/snippets/swift.lua

@@ -1,131 +0,0 @@
--- Setup snippets.
-local ls = require("luasnip")
-local s = ls.snippet
-local sn = ls.snippet_node
-local ms = ls.multi_snippet
-local i = ls.insert_node
-local f = ls.function_node
-local c = ls.choice_node
-local t = ls.text_node
-local fmt = require("luasnip.extras.fmt").fmt
-local rep = require("luasnip.extras").rep
--- Add snippets
-ls.add_snippets("swift", {
-	-- Add a dependency snippet.
-	s({ trig = "@d", desc = "Add a dependency." }, fmt("@Dependency(\\.{}) var {}", { i(1), rep(1) })),
-
-	-- Add a dependency client.
-	s(
-		{
-			trig = "@dc",
-			desc = "Add a dependency client.",
-		},
-		fmt(
-			[[
-		public extension DependencyValues {{
-			var {}: {} {{
-				get {{ self[{}.self] }}
-				set {{ self[{}.self] = newValue }}
-			}}
-		}}
-
-		@DependencyClient
-		public struct {} {{
-
-			// Insert interface here.
-			{}
-		}}
-
-		extension {}: TestDependencyKey {{
-			public static let testValue: {} = Self()
-		}}
-
-	]],
-			{
-				i(1, "<name>"),
-				i(2, "<Dependency>"),
-				rep(2),
-				rep(2),
-				rep(2),
-				i(0),
-				rep(2),
-				rep(2),
-			}
-		)
-	),
-
-	s(
-		{ trig = "str", desc = "Add a struct" },
-		fmt(
-			[[
-	struct {}: {} {{
-		{}
-	}}
-	]],
-			{ i(1, "<Name>"), i(2, "<Protocols>"), i(0) }
-		)
-	),
-
-	-- Decorate a type or function with an @_spi(...)
-	s({ trig = "@_s", desc = "Add spi modifier." }, fmt("@_spi({})", { i(1, "name") })),
-
-	-- Add an @_spi(...) import ...
-	s(
-		{ trig = "@_si", desc = "Import with spi." },
-		fmt(
-			[[
-		@_spi({}) import {}
-		{}
-		]],
-			{ i(1, "name"), i(2, "module"), i(0) }
-		)
-	),
-
-	-- Document a function
-	-- TODO: add dynamic number of prameters.
-	s(
-		{ trig = "docf", desc = "Document a function." },
-		fmt(
-			[[
-		/// {}
-		///
-		/// - Parameters:
-		///		- {}: {}
-		]],
-			{ i(1, "A short description."), i(2, "<param>"), i(3, "Describe the parameter.") }
-		)
-	),
-
-	-- Add a parameter to a documentation string.
-	s(
-		{ trig = "param", desc = "Add a parameter to documentation" },
-		fmt(
-			[[
-		///		- {}: {}
-	]],
-			{ i(1, "<param>"), i(2, "<description>") }
-		)
-	),
-
-	-- Add a withDependencies
-	s(
-		{ trig = "wd", desc = "withDependencies" },
-		fmt(
-			[[
-			withDependencies {{
-				$0.{} = {}
-			}} operation: {{
-				@Dependency(\.{}) var {}
-				{}
-			}}
-	]],
-			{
-				i(1, "<dependency>"),
-				i(2, "<override>"),
-				rep(1),
-				rep(1),
-				i(0),
-			}
-		)
-	),
-})

env/.config/nvim/spell/en.utf-8.add

@@ -1,21 +0,0 @@
-MeasureQuick
-Housh
-sealtite
-Subcool
-OEM
-NEC
-AHJ
-CFM
-Hydronic
-subpar
-quo
-IAQ
-wc
-HVAC
-dehumidification
-ansible
-orchestrator
-ethernet
-unifi
-wildcard
-Housh

env/.config/nvim/stylua.toml

@@ -1,3 +0,0 @@
-indent_type = "Spaces"
-indent_width = 2
-column_width = 120

env/.config/ripgrep/ripgreprc

@@ -0,0 +1,7 @@
+# Show hidden files
+--hidden
+# Ignore '.git' directory
+--glob=!.git/*
+--no-follow
+--color=never
+

env/.config/starship/starship.toml

@@ -7,27 +7,13 @@ format = """
 $os\
 $username\
 $hostname\
-[](bg:color_pink fg:color_orange)\
+[](bg:color_lavender fg:color_orange)\
+${custom.devpod}\
+[](bg:color_pink fg:color_lavender)\
 $directory\
-[](fg:color_pink bg:color_lavender)\
+[](fg:color_pink bg:color_bg1)\
 $git_branch\
 $git_status\
-[](fg:color_lavender bg:color_blue)\
-$c\
-$rust\
-$golang\
-$nodejs\
-$php\
-$java\
-$kotlin\
-$haskell\
-$python\
-[](fg:color_blue bg:color_bg3)\
-$docker_context\
-$conda\
-[](fg:color_bg3 bg:color_green)\
-$time\
-[ ](fg:color_green)\
 $line_break$character"""
 
 palette = 'catppuccin_mocha'
@@ -47,6 +33,15 @@ color_yellow = '#eed49f'
 color_grey = '#585b70'
 color_maroon = '#eba0ac'
 color_pink = '#f5c2e7'
+color_text = '#585b70'
+
+[custom.devpod]
+description = "Displays the active Devpod workspace"
+command = "echo $(echo $DEVPOD_WORKSPACE_ID | sed 's/.*://')"
+when = "[[ -n $DEVPOD_WORKSPACE_ID ]]"
+style = "bold bg:color_lavender fg:color_text"
+format = "[ 📦 $output ]($style)"
+disabled = false
 
 [os]
 disabled = false
@@ -75,17 +70,17 @@ RedHatEnterprise = "󱄛"
 
 [username]
 show_always = true
-style_user = "bold bg:color_orange fg:color_grey"
-style_root = "bold bg:color_orange fg:color_grey"
+style_user = "bold bg:color_orange fg:color_text"
+style_root = "bold bg:color_orange fg:color_text"
 format = '[ $user ]($style)'
 
 [hostname]
 ssh_only = true
-format = '[$ssh_symbol : $hostname](bold bg:color_orange fg:color_grey)'
+format = '[$ssh_symbol : $hostname](bold bg:color_orange fg:color_text)'
 disabled = false
 
 [directory]
-style = "bold fg:color_grey bg:color_pink"
+style = "bold fg:color_text bg:color_pink"
 format = "[ $path ]($style)"
 truncation_length = 3
 truncation_symbol = "…/"
@@ -100,72 +95,12 @@ truncate_to_repo = true
 
 [git_branch]
 symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol $branch ](bold fg:color_grey bg:color_lavender)]($style)'
+style = "bg:color_bg1"
+format = '[[ $symbol $branch ](bold fg:color_green bg:color_bg1)]($style)'
 
 [git_status]
-style = "bg:color_blue"
-format = '[[($all_status$ahead_behind )](bold fg:color_grey bg:color_lavender)]($style)'
-
-[nodejs]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[c]
-symbol = " "
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[rust]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[golang]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[php]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[java]
-symbol = " "
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[kotlin]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[haskell]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[python]
-symbol = ""
-style = "bg:color_blue"
-format = '[[ $symbol( $version) ](fg:color_fg0 bg:color_blue)]($style)'
-
-[docker_context]
-symbol = ""
-style = "bg:color_bg3"
-format = '[[ $symbol( $context) ](fg:#83a598 bg:color_bg3)]($style)'
-
-[conda]
-style = "bg:color_bg3"
-format = '[[ $symbol( $environment) ](fg:#83a598 bg:color_bg3)]($style)'
-
-[time]
-disabled = false
-time_format = "%R"
-style = "bg:color_green"
-format = '[[  $time ](bold fg:color_grey bg:color_green)]($style)'
+style = "bold bg:color_bg1"
+format = '[[($all_status$ahead_behind )](bold fg:color_green bg:color_bg1)]($style)'
 
 [line_break]
 disabled = false

env/.config/systemd/user/tmux-kill-sessions.service

@@ -0,0 +1,7 @@
+[Unit]
+Description=Tmux kill sessions service
+After=graphical-session.target
+
+[Service]
+Type=oneshot
+ExecStart=%h/.local/scripts/tmux-kill-old-sessions

env/.config/systemd/user/tmux-kill-sessions.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Tmux kill sessions timer
+Requires=tmux-kill-sessions.service
+
+[Timer]
+OnBootSec=2h
+OnUnitActiveSec=2h
+AccuracySec=10sec
+
+[Install]
+WantedBy=timers.target

env/.config/utils-launcher/config.json

@@ -14,10 +14,15 @@
     "description": "Clear the clipboard history file.",
     "exec": "$SCRIPTS/hypr/clear-clipboard-history --notify-complete"
   },
+  {
+    "name": "Logs - view logs",
+    "description": "View logs generated by our custom commands.",
+    "exec": "$SCRIPTS/hypr/utils/logs/logs-picker"
+  },
   {
     "name": "Monitors - stats / picker",
     "description": "View information from hyprctl about currently connected monitors.",
-    "exec": "$SCRIPTS/hypr/monitor-picker"
+    "exec": "$SCRIPTS/hypr/monitorctl picker"
   },
   {
     "name": "Waybar - restart",
@@ -32,16 +37,21 @@
   {
     "name": "Windows - window stats / picker",
     "description": "View information from hyprctl about all the current windows.\n\nAllows you to choose an action you would like to perform on the selected window.",
-    "exec": "$SCRIPTS/hypr/windowctl"
+    "exec": "$SCRIPTS/hypr/windowctl picker"
   },
   {
     "name": "Windows - close in active workspace",
     "description": "Close all windows in the currently active workspace.",
-    "exec": "$SCRIPTS/hypr/close-windows --active-workspace"
+    "exec": "$SCRIPTS/hypr/windowctl close --active-workspace"
   },
   {
     "name": "Windows - close ALL",
     "description": "Close all windows in all workspaces.",
-    "exec": "$SCRIPTS/hypr/close-windows --all"
+    "exec": "$SCRIPTS/hypr/windowctl close --all"
+  },
+  {
+    "name": "Workspaces - stats / picker",
+    "description": "View information from hyprctl about currently available workspaces",
+    "exec": "$SCRIPTS/hypr/workspacectl picker"
   }
 ]

env/.config/walker/config.toml

@@ -1,138 +0,0 @@
-force_keyboard_focus = true     # forces keyboard forcus to stay in Walker
-close_when_open = true          # close walker when invoking while already opened
-selection_wrap = false          # wrap list if at bottom or top
-global_argument_delimiter = "#" # query: firefox#https://benz.dev => part after delimiter will be ignored when querying. this should be the same as in the elephant config
-keep_open_modifier = "shift"    # won't close on activation, but rather select the next item in the list
-exact_search_prefix = "'"       # disable fuzzy searching
-theme = "default"               # theme to use
-disable_mouse = false           # disable mouse (on input and list only)
-
-[shell]
-anchor_top = true
-anchor_bottom = true
-anchor_left = true
-anchor_right = true
-
-[placeholders]
-"default" = { input = "Search", list = "No Results" } # placeholders for input and empty list, key is the providers name, so f.e. "desktopapplications" or "menus:other"
-
-[keybinds]
-close = "Escape"
-next = "Down"
-previous = "Up"
-toggle_exact = "ctrl e"
-resume_last_query = "ctrl r"
-quick_activate = ["F1", "F2", "F3", "F4"]
-
-[providers]
-default = [
-  "desktopapplications",
-  "calc",
-  "runner",
-  "menus",
-  "websearch",
-] # providers to be queried by default
-empty = ["desktopapplications"] # providers to be queried when query is empty
-
-[[providers.prefixes]]
-prefix = ";"
-provider = "providerlist"
-
-[[providers.prefixes]]
-prefix = "/"
-provider = "files"
-
-[[providers.prefixes]]
-prefix = "."
-provider = "symbols"
-
-[[providers.prefixes]]
-prefix = "!"
-provider = "todo"
-
-[[providers.prefixes]]
-prefix = "="
-provider = "calc"
-
-[[providers.prefixes]]
-prefix = "@"
-provider = "websearch"
-
-[[providers.prefixes]]
-prefix = ":"
-provider = "clipboard"
-
-[providers.archlinuxpkgs]
-default = "install"
-install = "Return"
-remove = "ctrl d"
-
-[providers.calc]
-default = "copy"
-copy = "Return"
-save = "ctrl s"
-delete = "ctrl d"
-
-[providers.websearch]
-default = "search"
-search = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.providerlist]
-default = "activate"
-activate = "Return"
-
-[providers.clipboard]
-time_format = "%d.%m. - %H:%M" # format for the clipboard item date
-default = "copy"
-copy = "Return"
-delete = "ctrl d"
-edit = "ctrl o"
-toggle_images_only = "ctrl i"
-
-[providers.desktopapplications]
-default = "start"
-start = "Return"
-start_keep_open = "shift Return"
-remove_history = "ctrl BackSpace"
-toggle_pin = "ctrl p"
-
-[providers.files]
-default = "open"
-open = "Return"
-open_dir = "ctrl Return"
-copy_path = "ctrl shift c"
-copy_file = "ctrl c"
-
-[providers.todo]
-default = "save"
-save = "Return"
-delete = "ctrl d"
-mark_active = "ctrl a"
-mark_done = "ctrl f"
-clear = "ctrl x"
-
-[providers.runner]
-default = "start"
-start = "Return"
-start_terminal = "shift Return"
-remove_history = "ctrl BackSpace"
-
-[providers.dmenu]
-default = "select"
-select = "Return"
-
-[providers.symbols]
-default = "copy"
-copy = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.unicode]
-default = "copy"
-copy = "Return"
-remove_history = "ctrl BackSpace"
-
-[providers.menus]
-default = "activate"
-activate = "Return"
-remove_history = "ctrl BackSpace"

env/.config/waybar/config.jsonc

@@ -6,6 +6,7 @@
   "modules-center": ["clock"],
   "modules-right": [
     "pulseaudio",
+		"idle_inhibitor",
     "tray",
     "cpu",
     "memory",
@@ -76,4 +77,12 @@
     // "format-full": "",
     "format-icons": ["", "", "", "", ""],
   },
+	"idle_inhibitor": {
+    "format": "{icon}",
+    "format-icons": {
+        "activated": "",
+        "deactivated": ""
+    },
+	}
+}
 }

env/.config/waybar/style.css

@@ -54,7 +54,8 @@
 #cpu,
 #memory,
 #custom-lock,
-#custom-power {
+#custom-power,
+#idle_inhibitor {
   background-color: @background;
   padding: 0.5rem 1rem;
   margin: 5px 0;
@@ -69,12 +70,18 @@
   font-weight: 900;
 }
 
+
 #pulseaudio {
   color: @red;
   border-radius: 10px 0px 0px 10px;
   margin-left: 1rem;
 }
 
+#idle_inhibitor {
+	border-radius: 0px;
+	margin: 0px;
+}
+
 #tray {
   color: @blue;
   border-radius: 0px 10px 10px 0px;

env/.config/zsh/.zshrc

@@ -19,17 +19,6 @@ zle -N down-line-or-beginning-search
 # Colors
 autoload -Uz colors && colors
 
-#------------------------------ pager ------------------------------
-#eval "$(batman --export-env)"
-# export LESS_TERMCAP_mb="" # magenta
-# export LESS_TERMCAP_md="" # yellow
-# export LESS_TERMCAP_me=""
-# export LESS_TERMCAP_se=""
-# export LESS_TERMCAP_so="" # blue
-# export LESS_TERMCAP_ue=""
-# export LESS_TERMCAP_so="" # underline
-# export LESSHISTFILE="-"
-
 #------------------------------ path ------------------------------
 
 # Helper function to prepend to the $PATH
@@ -63,17 +52,21 @@ path_prepend \
   "$GOROOT/bin" \
   "$GOPATH/bin" \
   "$XDG_DATA_HOME/bin" \
+  "$XDG_DATA_HOME/npm/bin" \
   "$HOME/.local/bin" \
   "$SCRIPTS" \
   "$SCRIPTS/hypr" \
+  "$SCRIPTS/mail" \
   "$HOME/.local/pnpm" \
   "$CARGO_HOME/bin" \
-  "$HOME/.local/bin"
+  "$HOME/.local/bin" \
+  "$XDG_DATA_HOME/bob/nvim-bin"
 
 # last arg will be first in $FPATH
 fpath_prepend \
   "$ZDOTDIR/completions" \
   "$HOME/.local/share/zsh/completions" \
+  "$HOME/.zsh/completions" \
   "$ZDOTDIR/functions"
 
 autoload -Uz $fpath[1]/*(.:t)
@@ -93,8 +86,6 @@ export HISTFILESIZE=5000
 export SAVEHIST=5000
 export HISTFILE="$XDG_CONFIG_HOME/zsh/history"
 
-#set -o vi
-
 #------------------------------ cdpath ------------------------------
 setopt autocd
 
@@ -128,7 +119,7 @@ zsh_add_plugin "Aloxaf/fzf-tab"
 
 #------------------------------ completions ------------------------------
 # case insensitive path-completion

-zstyle ':completion:*' matcher-list 'm:{[:lower:][:upper:]}={[:upper:][:lower:]}' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*' 'm:{[:lower:][:upper:]}={[:upper:][:lower:]} l:|=* r:|=*'

+zstyle ':completion:*' matcher-list 'm:{a-z}={A-Z}'
 
 # partial completion suggestions
 zstyle ':completion:*' list-suffixes
@@ -149,10 +140,8 @@ _source_if "$ZDOTDIR/plugins/fzf-tab/fzf-tab.plugin.zsh"
 
 #------------------------------ prompt ------------------------------
 
-# Prompt / managed by brew. (`brew install starship`)
 autoload -Uz promptinit; promptinit
 eval "$(starship init zsh)"
-#prompt pure
 
 #------------------------------ aliases ------------------------------
 
@@ -165,6 +154,7 @@ alias d='docker'                        # run docker commands quickly
 alias dc='docker compose'               # run docker-compose commands quickly
 alias dv='dirs -v'                      # list directory info
 alias essh='edit-ssh-config'            # edit ssh config quickly
+alias email='tmux-sessionator --email'  # Open email tmux session.
 alias fl='find-latest'                  # Find the last modified file in a directory.
 alias g='git'                           # access git commands quickly
 alias ga='git add'                      # add files to git quickly
@@ -176,17 +166,19 @@ alias gs='git status'                   # git status quickly
 alias hn='hugo new'                     # generate a hugo site
 alias hnc='hugo new content'            # generate new hugo site content quickly
 alias j='just'                          # run justfile's quickly.
+alias kb='kanatactl'                    # Keyboard / kanata commands.
 alias l='eza --long --git --group --links --icons --all'                # better ls command.
 alias lfs='ls -lahH --color=auto "$ZDOTDIR/functions"'    # List functions.
 alias ls='eza --long --git --group --links --icons --all'
 alias lt='eza --long --git --group --links --icons --tree'
-alias pass='gopass'
-alias p='gopass'                        # run the pass command quickly.
+alias pass='PASSWORD_STORE_DIR=/home/michael/.local/share/gopass/stores/root gopass'
 alias pc='gopass show --clip'          # get an attribute of a password file and copy to the clipboard.
 alias reload='exec zsh -l'              # reload the shell, useful when making changes.
 alias s='swift'                         # shorthand to access swift commands
 alias st='swift test' 									# swift test
+alias ste='swift test --enable-code-coverage' # swift test with code coverage enabled.
 alias sb='swift build'                  # swift build
+alias syu='yay -Syu'										# Update packages.
 alias t='tmux'                          # access tmux quickly
 alias tka='tmux kill-server'            # kill tmux server and all sessions.
 alias ts='$SCRIPTS/tmux-sessionator'    # create new tmux session, fuzzy finding common locations.
@@ -196,11 +188,7 @@ alias tks='tmux kill-session -t'        # kill tmux session
 alias temp='cd $(mktemp -d)'            # create a temporary directory and move into it.
 alias vi='nvim'                         # set vi to open neovim
 alias newf='"$SCRIPTS"/newx --function' # generate a new shell function
-alias nlnv='nvim "$LOCAL_ENV"'          # open local environment overrides file in neovime
-alias nvim='unset VIMINIT && unset MYVIMRC && nvim'   # alias nvim to unset vimrc, useful when using both vim & neovim
-alias nvim-mhoush='NVIM_APPNAME=m-housh && nvim'      # set neovim to use my config.
-alias nvim-kickstart='NVIM_APPNAME=kickstart nvim'    # set neovim to use kickstart config.
-alias nvim-lazy='NVIM_APPNAME=lazy nvim'              # set neovim to use lazy config.
+alias n='nvim'
 alias wget="wget --hsts-file=$XDG_DATA_HOME/wget-hsts"  # set wget history location.
 # GPG Yubikey restart relearn when switching keys and stubbed.
 alias yubikeyrestart='gpg-connect-agent killagent /bye && gpg-connect-agent "scd serialno" "learn --force" /bye && gpg --card-status'
@@ -220,6 +208,7 @@ source <(fzf --zsh)
 _source_if "$ZDOTDIR/.zshrc-local"
 _source_if "$LOCAL_ENV"
 _source_if "$SCRIPTS/catppuccin-colors"
+_source_if "$XDG_DATA_HOME/swiftly/env.sh"
 
 # pnpm
 export PNPM_HOME="$XDG_DATA_HOME/pnpm"
@@ -230,12 +219,9 @@ esac
 # pnpm end
 
 # The following lines have been added by Docker Desktop to enable Docker CLI completions.
-fpath=(/Users/michael/.docker/completions $fpath)
 autoload -Uz compinit
 compinit
 
-#eval "$(ssh-agent -s)" 1>/dev/null
-
 ########################################
 # Set things up for using gpg-agent
 
@@ -253,3 +239,7 @@ use-gpg-agent-for-ssh
 
 command -v direnv >/dev/null 2>&1 && eval "$(direnv hook zsh)"
 command -v zoxide >/dev/null 2>&1 && eval "$(zoxide init --cmd cd zsh)"
+
+if [[ -n "$DEVPOD_WORKSPACE_ID" ]]; then
+	export TERM=xterm-256color
+fi

env/.config/zsh/functions/dp

@@ -7,6 +7,6 @@ function dp() {
 	local temperature=$1
 	local humidity=$2
 
-  /opt/homebrew/bin/psychrometrics dew-point --dry-bulb "$temperature" --relative-humidity "$humidity"
+	psychrometrics dew-point --dry-bulb "$temperature" --relative-humidity "$humidity"
 
 }

env/.config/zsh/functions/n

@@ -1,25 +0,0 @@
-#!/usr/bin/env zsh
-
-# Open's neovim.
-#
-# If the argument passed in is a directory or not supplied, then
-# open neovim with telescope find files opened. Otherwise open the
-# file that is supplied.
-#
-
-function n() {
-  # if [ -z "$1" ]; then
-  #   local gitdir=$(git rev-parse --show-toplevel 2> /dev/null)
-  #
-  #   [ -n "$gitdir" ] \
-  #     && nvim -c ":Telescope git_files" \
-  #     && return 0
-  #
-  #   [ -d "$1" ] \
-  #     && nvim -c ":Telescope find_files" \
-  #     && return 0
-  # fi
-
-  nvim "$@"
-}
-

env/.gnupg/gpg-agent.conf

@@ -2,13 +2,5 @@
 # https://www.gnupg.org/documentation/manuals/gnupg/Agent-Options.html
 enable-ssh-support
 ttyname $GPG_TTY
-default-cache-ttl 60
+default-cache-ttl 120
 max-cache-ttl 120
-#pinentry-program /usr/bin/pinentry-curses
-#pinentry-program /usr/bin/pinentry-gnome3
-#pinentry-program /bin/pinentry-tty
-#pinentry-program /usr/bin/pinentry-x11
-#pinentry-program /usr/local/bin/pinentry-curses
-#pinentry-program /bin/pinentry-dmenu
-
-#pinentry-program /opt/homebrew/bin/pinentry-mac

env/.local/scripts/aap

@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# A wrapper script to run swift-hpa in a docker container and
+# mount the correct volumes, etc.
+#
+# Make sure to run 'hpa-init' first on this machine to setup
+# dependencies, if you have not done so already.
+#
+# To attach to a shell inside the container run:
+# `hpa bash`
+#
+# To run ansible vault commands inside the container run:
+# `hpa ansible-vault ...`
+#
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+############################## MAIN ##############################
+
+# Don't pull images if they're prefixed with 'localhost'.
+if echo "$HPA_DOCKER_IMAGE" | grep -vq "localhost"; then
+
+	# Check if we should pull the image prior to running.
+	last_pull="0"
+	if [[ -f "$HPA_AIRFLOW_CONFIG_DIR/.lastpull" ]]; then
+		last_pull=$(cat "$HPA_AIRFLOW_CONFIG_DIR/.lastpull")
+	fi
+	curr=$(date +%s)
+	diff=$((curr - last_pull))
+
+	if [[ $HPA_AUTO_PULL == "1" ]] && [[ $diff -gt "$HPA_AUTO_PULL_INTERVAL" ]]; then
+		. "$SCRIPTS/hpa-pull" "$HPA_AUTO_PULL_OPTS"
+	fi
+fi
+
+podman run --rm --interactive --tty \
+	--volume "$HPA_AIRFLOW_CONFIG_DIR":/root/.config/hpa:ro \
+	--volume "$HPA_DATA_DIR":/root/.local/share/hpa:ro \
+	--volume "$HPA_CONSULTS_DIR":/consults \
+	--volume "$PWD":/root/project \
+	--secret "$HPA_VAULT_SECRET_KEY" \
+	"$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" "$@"

env/.local/scripts/backup-logger

@@ -0,0 +1,68 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+LOG_DIR="/tmp/logs"
+
+usage() {
+	cat <<EOF
+
+Utility for logging backup runs.
+
+USAGE:
+	$ $THIS <flags> <msg...>
+
+FLAGS:
+	-h | --help:					Show this help page.
+	-s | --show:					Show the log messages.
+	--rm:									Remove the log file
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+show() {
+	[[ ! -f "$LOG_DIR/$LOG_FILE" ]] &&
+		log --warning "Empty log file." &&
+		exit 0
+
+	bat "$LOG_DIR/$LOG_FILE"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+declare -a msg
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-s" ]] || [[ $1 == "--show" ]]; then
+		show && exit 0
+	elif [[ $1 == "--rm" ]]; then
+		rm "$LOG_DIR/$LOG_FILE" && exit 0
+	else
+		msg+=("$1")
+	fi
+	shift
+done
+
+[[ -z "${msg[*]}" ]] && log --error "No message passed to log." && exit 1
+
+log "${msg[@]}"

env/.local/scripts/hpa

@@ -0,0 +1,49 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+# A wrapper script to run swift-hpa in a docker container and
+# mount the correct volumes, etc.
+#
+# Make sure to run 'hpa-init' first on this machine to setup
+# dependencies, if you have not done so already.
+#
+# To attach to a shell inside the container run:
+# `hpa bash`
+#
+# To run ansible vault commands inside the container run:
+# `hpa ansible-vault ...`
+#
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+############################## MAIN ##############################
+
+# Don't pull images if they're prefixed with 'localhost'.
+if echo "$HPA_DOCKER_IMAGE" | grep -vq "localhost"; then
+
+	# Check if we should pull the image prior to running.
+	last_pull="0"
+	if [[ -f "$HPA_CONFIG_DIR/.lastpull" ]]; then
+		last_pull=$(cat "$HPA_CONFIG_DIR/.lastpull")
+	fi
+	curr=$(date +%s)
+	diff=$((curr - last_pull))
+
+	if [[ $HPA_AUTO_PULL == "1" ]] && [[ $diff -gt "$HPA_AUTO_PULL_INTERVAL" ]]; then
+		. "$SCRIPTS/hpa-pull" "$HPA_AUTO_PULL_OPTS"
+	fi
+fi
+
+echo "ARGS: $@"
+
+podman run --rm --interactive --tty \
+	--volume "$HPA_CONFIG_DIR":/root/.config/hpa:ro \
+	--volume "$HPA_DATA_DIR":/root/.local/share/hpa:ro \
+	--volume "$HPA_CONSULTS_DIR":/consults \
+	--volume "$PWD":/root/project \
+	--secret "$HPA_VAULT_SECRET_KEY" \
+	"$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" "$@"

env/.local/scripts/hpa-create

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+title="Creating project..."
+script="${SCRIPTS:-$HOME/.local/scripts}/utils/hpa/hpa-create"
+first_arg=${1:-""}
+if [[ $first_arg == "-h" ]] || [[ $first_arg == "--help" ]]; then
+	. "$script" $*
+else
+	# bash -c "$script $*" | tr -d '\r' | head -1
+	gum spin --show-output --title "$title" -- bash -c "$script $*" | tr -d '\r' | head -1
+fi

env/.local/scripts/hpa-init

@@ -0,0 +1,98 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+# Load environment / shared variables.
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+usage() {
+	cat <<EOF
+
+Setup dependencies for running hpa script in docker.  This only needs to be
+ran once on a new machine.
+
+USAGE:
+  $ $THIS <flags> <shell> <completion-file>
+
+FLAGS:
+  -h | --help:          Show this help page.
+
+DEFAULTS:
+  shell:                Default is 'zsh', accepts 'zsh' | 'bash' | 'fish'
+  completion-file:      Default is '~/.zsh/completions/_hpa'
+
+ENVIRONMENT:
+  CONSULTS_DIR:         Set the directory where consults / projects are stored.
+                        (default: '~/work/consults')
+
+  HPA_DOCKER_TAG:       Set the docker image tag to use for the hpa docker image
+                        (default: 'latest')
+
+  HPA_VAULT_SECRET_KEY: Set the key used for the ansible-vault secret.
+                        (default: 'vault-pass')
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+generate-completion() {
+	local output_dir output type
+	type=${1:-"zsh"}
+	output=${2:-$HOME/.zsh/completions/_hpa}
+	output_dir=$(dirname "$output")
+
+	log "Generating completion: type: '$type', to: $output"
+
+	[[ ! -d "$output_dir" ]] && mkdir -p "$output_dir"
+	(
+		podman run --rm -it "$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG" \
+			--generate-completion-script "$type" |
+			tr -d '\r'
+	) >"$output"
+}
+
+generate-secret() {
+	log "Generating vault secret for key: '$HPA_VAULT_SECRET_KEY'"
+	local secret
+	secret="$(pass -c ansible/vault-pass)"
+	printf "%s" "$secret" | podman secret create "$HPA_VAULT_SECRET_KEY" -
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+first_arg=${1:-""}
+if [[ $first_arg == "-h" ]] || [[ $first_arg == "--help" ]]; then
+	usage && exit 0
+else
+	# Setup logging file and label.
+	source "$SCRIPTS/hypr/logging"
+	setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+	log "Starting init..."
+
+	generate-completion "$@"
+	generate-secret
+
+	log "Generating directories, if they don't exist."
+	mkdir -p "$HPA_CONSULTS_DIR" &>/dev/null
+	mkdir "$HPA_DATA_DIR" &>/dev/null
+
+	log "Cloning required template and playbook, if they don't exist"
+	[[ ! -d "$HPA_PLAYBOOK_DIR" ]] && git clone "$HPA_PLAYBOOK_URL" "$HPA_PLAYBOOK_DIR"
+	[[ ! -d "$HPA_CONSULT_TEMPLATE_DIR" ]] && git clone "$HPA_CONSULT_TEMPLATE_URL" "$HPA_CONSULT_TEMPLATE_DIR"
+	[[ ! -d "$HPA_AIRFLOW_TEMPLATE_DIR" ]] && git clone "$HPA_AIRFLOW_TEMPLATE_URL" "$HPA_AIRFLOW_TEMPLATE_DIR"
+fi

env/.local/scripts/hpa-pull

@@ -0,0 +1,112 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+# Load environment / shared variables.
+. "$SCRIPTS/utils/hpa/hpa.env"
+
+usage() {
+	cat <<EOF
+
+Pulls / updates template, playbook, docker image, etc.
+
+USAGE:
+  $ $THIS <flags>
+
+FLAGS:
+  -a | --all:           Pull everything (default).
+  -d | --docker:        Pull docker image.
+  -p | --playbook:      Pull ansible-hpa-playbook.
+  -t | --template:      Pull consult template.
+  -h | --help:          Show this help page.
+
+If no flags are passed in then we will pull everything.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+	logging log --source "$THIS_FILE" "$@"
+}
+
+pull-repo() {
+	local dir=${1:-""}
+	[[ -z "$dir" ]] &&
+		log --error "Directory not supplied to pull git repo." &&
+		exit 1
+
+	pushd "$dir" &>/dev/null || exit 1
+	(
+		git pull
+	)
+	popd &>/dev/null
+}
+
+pull-docker() {
+	log --echo "Pulling docker image: '$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG'"
+	podman pull "$HPA_DOCKER_IMAGE:$HPA_DOCKER_TAG"
+}
+
+pull-playbook() {
+	log --echo "Pulling playbook: '$HPA_PLAYBOOK_DIR'"
+	pull-repo "$HPA_PLAYBOOK_DIR"
+}
+
+pull-template() {
+	log --echo "Pulling template: '$HPA_CONSULT_TEMPLATE_DIR'"
+	pull-repo "$HPA_CONSULT_TEMPLATE_DIR"
+
+	log --echo "Pulling airflow assessment template: '$HPA_AIRFLOW_TEMPLATE_DIR'"
+	pull-repo "$HPA_AIRFLOW_TEMPLATE_DIR"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+all_flag="1"
+docker_flag="0"
+playbook_flag="0"
+template_flag="0"
+
+while [[ $# -gt 0 ]]; do
+	if [[ $1 == "-a" ]] || [[ $1 == "--all" ]]; then
+		all_flag="1"
+		break
+	elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+		usage && exit 0
+	elif [[ $1 == "-d" ]] || [[ $1 == "--docker" ]]; then
+		all_flag="0"
+		docker_flag="1"
+	elif [[ $1 == "-p" ]] || [[ $1 == "--playbook" ]]; then
+		all_flag="0"
+		playbook_flag="1"
+	elif [[ $1 == "-t" ]] || [[ $1 == "--template" ]]; then
+		all_flag="0"
+		template_flag="1"
+	fi
+	shift
+done
+
+if [[ $all_flag == "1" ]]; then
+	docker_flag="1"
+	playbook_flag="1"
+	template_flag="1"
+fi
+
+[[ $docker_flag == "1" ]] && pull-docker
+[[ $playbook_flag == "1" ]] && pull-playbook
+[[ $template_flag == "1" ]] && pull-template
+date +%s >"$HPA_CONFIG_DIR/.lastpull"
+date +%s >"$HPA_AIRFLOW_CONFIG_DIR/.lastpull"

env/.local/scripts/hypr/close-windows

@@ -1,147 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-# FIX: Fix args not set error, to be able to use this option.
-#set -o nounset
-set -o pipefail
-
-THIS_FILE=${BASH_SOURCE[0]}
-# Allows script name to be set when called from a parent script or defaults to filename.
-THIS=${THIS:-$(basename "$THIS_FILE")}
-
-usage() {
-  cat <<EOF
-
-Close window(s) by address or pattern mode.
-
-USAGE:
-  $ $THIS [OPTIONS] [MODE] [ARG...]
-
-MODE:
-  --all:                      Close all windows in all workspaces, any arguments are ignored.
-
-  -a | --active-workspace:    Close all windows in the active workspace, any arguments are ignored.
-
-  -c | --class:               Close all windows whose class contains one of the passed arguments.
-
-  -s | --special:             Close all windows in special workspaces whose name matches on of the
-                              passed in arguments, or if no arguments are supplied then it will close
-                              all windows in all special workspaces.
-OPTIONS:
---dry-run
--h | --help:      Show this help page.
-
-NOTES:
-
-If a mode is selected all arguments are treated for that mode, meaning only one mode
-runs. It does not work to mix modes / arguments.
-
-If no modes are supplied then arguments are assumed to be window addresses and we will
-close all supplied window addresses.
-
-
-EOF
-}
-
-active_workspace_flag="0"
-all_flag="0"
-class_flag="0"
-dry_run_flag="0"
-special_flag="0"
-declare -a args=()
-declare -a addresses=()
-SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
-
-while [[ $# -gt 0 ]]; do
-  if [[ $1 =~ ^-a ]] || [[ $1 =~ ^--active-workspace ]]; then
-    active_workspace_flag="1"
-  elif [[ $1 =~ ^--all ]]; then
-    all_flag="1"
-  elif [[ $1 =~ ^-c ]] || [[ $1 =~ ^--class ]]; then
-    class_flag="1"
-  elif [[ $1 =~ ^--dry-run ]]; then
-    dry_run_flag="1"
-  elif [[ $1 =~ ^-h ]] || [[ $1 =~ ^--help ]]; then
-    usage && exit 0
-  elif [[ $1 =~ ^-s ]] || [[ $1 =~ ^--special ]]; then
-    special_flag="1"
-  else
-    args+=("$1")
-  fi
-  shift
-done
-
-log() {
-  logging log --source "$THIS_FILE" "$@"
-}
-
-_select_addresses() {
-  local property=$1
-  local pattern=$2
-  addresses+=("$(hyprctl clients -j | jq -r ".[] | select($property | contains(\"$pattern\")) | .address")")
-}
-
-get_special_addresses() {
-
-  # If no arguments, then we add the "special" to the pattern args, which will
-  # match all windows in any special workspace.
-  # if [[ ${#args} == 0 ]]; then
-  #   args+=("special")
-  # fi
-
-  for name in ${args[@]}; do
-    log "Fetching addresses for special: $name"
-    _select_addresses .workspace.name $name
-  done
-}
-
-close() {
-  log "Closing window address: $1"
-  if [[ $dry_run_flag == "0" ]]; then
-    hyprctl dispatch closewindow "address:$1" >/dev/null 2>&1
-  fi
-}
-
-# Setup logging file and label
-source "$SCRIPTS/hypr/logging"
-setup-logging "/tmp/$THIS.log" "$THIS"
-export LOG_ENABLE_DRY_RUN="$dry_run_flag"
-
-if [[ $active_workspace_flag == "1" ]]; then
-  # Set addresses to active workspace windows.
-  id=$(hyprctl activeworkspace -j | jq -r '.id')
-  log "Fetching addresses for active workspace: $id"
-  addresses+=("$(hyprctl clients -j | jq -r ".[] | select(.workspace.id == $id) | .address")")
-
-elif [[ $all_flag == "1" ]]; then
-  # Set addresses to all window addresses.
-  addresses+=("$(hyprctl clients -j | jq -r ".[] | .address")")
-
-elif [[ $class_flag == "1" ]]; then
-  # Set addresses to all windows containing the passed in classes.
-  for c in ${args[@]}; do
-    _select_addresses .class $c
-  done
-
-elif [[ $special_flag == "1" ]]; then
-
-  # Set addresses to all windows in the passed in special workspaces.
-  get_special_addresses
-
-elif [[ -n $args ]]; then
-  # If no modes selected, then assume there were addresses passed in
-  # as args.
-  addresses=$args
-fi
-
-# If no addresses at this point, then read from stdin, which allows addresses
-# to be piped in.
-if [[ ${#addresses} == 0 ]]; then
-  log "No window addresses supplied, reading from stdin..."
-  read -r addresses
-  log "Addresses: ${addresses[@]}"
-fi
-
-for address in ${addresses[@]}; do
-  close $address
-done

env/.local/scripts/hypr/launch

@@ -1,7 +1,14 @@
 #!/usr/bin/env bash
 
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
 THIS=$(basename "$THIS_FILE")
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 
 usage() {
 	cat <<EOF
@@ -52,7 +59,6 @@ launch_cmd=()
 pattern=""
 special_flag="0"
 special=""
-SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 
 while [[ $# -gt 0 ]]; do
 	if [[ $1 == "-c" ]] || [[ $1 == "--or-close" ]]; then
@@ -104,8 +110,8 @@ toggle_special() {
 
 launch_application() {
 	log "Launching..."
-  log "'${launch_cmd[@]}'"
-  eval exec ${launch_cmd[@]}
+	log "'${launch_cmd[*]}'"
+	eval exec "${launch_cmd[*]}"
 }
 
 ################################################################################
@@ -114,7 +120,7 @@ launch_application() {
 
 # Setup logging file and label
 source "$SCRIPTS/hypr/logging"
-setup-logging "/tmp/$THIS.log" "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 if [[ -z $pattern ]]; then
 	log --error "Must supply a pattern to match the window class."

env/.local/scripts/hypr/logging

@@ -27,10 +27,13 @@
 # log --warning "My warning message."
 # log --error "My error message."
 #
+set -e
+set -o nounset
+set -o pipefail
 
-LOG_FILE=(${LOG_FILE:-})
-LOG_INVOCATION_ID=${LOG_INVOCATION_ID:-}
-LOG_LABEL=${LOG_LABEL:-()}
+LOG_DIR=${LOG_DIR:-/tmp/logs}
+LOG_INVOCATION_ID=${LOG_INVOCATION_ID:-""}
+LOG_LABEL=${LOG_LABEL:-""}
 # Run in dry run mode, which just prints to the console and does
 # not log to the files.
 LOG_ENABLE_DRY_RUN=${LOG_ENABLE_DRY_RUN:-"0"}
@@ -40,25 +43,28 @@ warn_flag="0"
 error_flag="0"
 
 __msg() {
-  if [[ -z "$@" ]]; then
+  if [[ -z "$*" ]]; then
     echo -e "\e[31m[ERROR]:\e[0m No logs were supplied."
     exit 1
   fi
   if [[ $warn_flag == "1" ]]; then
-    echo -e "\e[33m[WARN]:\e[0m $@"
+    echo -e "\e[33m[WARN]:\e[0m $*"
   elif [[ $error_flag == "1" ]]; then
-    echo -e "\e[31m[ERROR]:\e[0m $@"
+    echo -e "\e[31m[ERROR]:\e[0m $*"
   else
     echo "$@"
   fi
 }
 
 __ensure_setup() {
-  if [[ -z $LOG_FILE ]] || [[ -z $LOG_INVOCATION_ID ]] || [[ -z $LOG_LABEL ]]; then
+  if [[ -z $LOG_FILE ]] || [[ -z $LOG_INVOCATION_ID ]] || [[ -z $LOG_LABEL ]] || [[ -z $LOG_DIR ]]; then
     echo -e "\e[31m[ERROR]:\e[0m Logging is not properly setup."
     echo "Perhaps you didn't call 'setup-logging' first."
     print_logger_env && exit 1
   fi
+  if [[ ! -d $LOG_DIR ]]; then
+    mkdir -p "$LOG_DIR"
+  fi
 }
 
 logging() {
@@ -66,18 +72,19 @@ logging() {
 
   # Reset flags
   log_flag="0"
+  echo_flag="0"
   warn_flag="0"
   error_flag="0"
   source_file=""
   args=()
 
   while [[ $# -gt 0 ]]; do
-    if [[ $1 == "-w" ]] || [[ $1 =~ ^--warn ]]; then
-      log_flag="1"
+    if [[ $1 == "-w" ]] || [[ $1 == "--warn" ]] || [[ $1 == "--warning" ]]; then
       warn_flag="1"
     elif [[ $1 == "-e" ]] || [[ $1 =~ ^--error ]]; then
-      log_flag="1"
       error_flag="1"
+    elif [[ $1 =~ ^--echo ]]; then
+      echo_flag="1"
     elif [[ $1 == "-s" ]] || [[ $1 =~ ^--source ]]; then
       shift
       source_file="$1"
@@ -94,24 +101,39 @@ logging() {
     exit 1
   fi
 
-  if [[ -z $args ]]; then
+  if [[ -z "${args[*]}" ]]; then
     echo -e "\e[31m[ERROR]:\e[0m No log message supplied."
     exit 1
   fi
 
-  msg="$(__msg ${args[@]})"
+  msg="$(__msg "${args[@]}")"
 
-  if [[ $LOG_ENABLE_DRY_RUN == "0" ]]; then
+  if [[ $LOG_ENABLE_DRY_RUN == "0" ]] && [[ $log_flag == "1" ]]; then
     # Loop over log files logging message to each file.
     for i in "${!LOG_FILE[@]}"; do
-      prefix="[id: $LOG_INVOCATION_ID][time: $($SCRIPTS/isosec)][label: ${LOG_LABEL[i]}][source: $source_file] : "
-      m="$prefix $msg"
-      echo -e "$m" >>${LOG_FILE[i]}
+      local file=${LOG_DIR}/${LOG_FILE[i]}
+      local id=$LOG_INVOCATION_ID
+      local label=${LOG_LABEL[i]:-"$LOG_LABEL"}
+      local time
+      time=$(date '+%D %H:%M:%S')
+
+      if [[ -z $file ]] || [[ -z $id ]] || [[ -z $label ]]; then
+        echo "Logging not properly setup."
+        exit 1
+      fi
+
+      local prefix="[id: $id][time: $time][source: \e[32m$source_file\e[0m][\e[34m$label\e[0m] :"
+      local m="$prefix $msg"
+      echo -e "$m" >>"$file"
     done
 
     # Also log errors and warning messages to the console.
     if [[ $error_flag == "1" ]] || [[ $warn_flag == "1" ]]; then
-      echo -e "[id: $LOG_INVOCATION_ID]$msg"
+      echo -e "[id: $id]$msg"
+    elif [[ $warn_flag == "1" ]]; then
+      echo -e "[id: $id]$msg"
+    elif [[ $echo_flag == "1" ]]; then
+      echo -e "$msg"
     fi
   else
     # Dry run mode, so just log to the console
@@ -141,23 +163,29 @@ setup-logging() {
     exit 1
   fi
 
+  # Only add files that aren't already in the LOG_FILE.
+  if [[ ! $LOG_FILE =~ $file ]]; then
     LOG_FILE+=("$file")
+  fi
+
   LOG_INVOCATION_ID=${LOG_INVOCATION_ID:-$RANDOM}
 
-  if [[ -n $LOG_LABEL ]]; then
+  if [[ -n $LOG_LABEL ]] && [[ ! $LOG_LABEL =~ $label ]]; then
     LOG_LABEL+=("${LOG_LABEL[@]}=>$label")
-  else
+  elif [[ ! ${LOG_LABEL[*]} =~ $label ]]; then
     LOG_LABEL+=("$label")
   fi
+
+  export LOG_DIR
   export LOG_FILE
   export LOG_LABEL
   export LOG_INVOCATION_ID
 }
 
 print_logger_env() {
-  echo "LOG_FILE: ${LOG_FILE[@]}"
+  echo "LOG_FILE: ${LOG_FILE[*]}"
   echo "LOG_INVOCATION_ID: $LOG_INVOCATION_ID"
-  echo "LOG_LABEL: ${LOG_LABEL[@]}"
+  echo "LOG_LABEL: ${LOG_LABEL[*]}"
 }
 
 export -f setup-logging

env/.local/scripts/hypr/monitorctl

@@ -0,0 +1,111 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+window_class="com.ghostty.$THIS"
+window_padding_x="10"
+
+usage() {
+  cat <<EOF
+
+Utility for monitor controls.
+
+USAGE:
+
+  $ $THIS <command> <flags>
+
+FLAGS:
+  -h | --help:          Show this help page.
+
+COMMANDS:
+  launch:               Launch in a new terminal window.
+  picker:               Shows information about the monitor(s).
+  toggle:               Enable/disable a connected monitor.
+
+
+Run "$THIS <command> --help" for more information about a command.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+launch_usage() {
+  cat <<EOF
+
+Launches a new terminal window that runs the given '$THIS' command. If no command
+is supplied, then it will launch the picker command.
+
+USAGE:
+
+  $ $THIS launch <command> <flags>
+
+FLAGS:
+  -h | --help:          Show this help page.
+
+Run "$THIS --help" to show available commands that can ba launched in the new window.
+
+EOF
+}
+
+launch() {
+
+  if [[ $@ =~ ^-h ]] || [[ $@ =~ ^--help ]]; then
+    launch_usage && exit 0
+  fi
+
+  log "Launching terminal..."
+
+  ghostty --class=$window_class --window-padding-x=$window_padding_x \
+    --keybind="ctrl+c=quit" \
+    -e $THIS_FILE "$@"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+log "Starting args: '$@'"
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "launch" ]]; then
+    shift
+    if [[ -z "$@" ]]; then
+      launch picker && exit $?
+    else
+      launch "$@" && exit $?
+    fi
+  elif [[ $1 == "picker" ]]; then
+    shift
+    log "Showing picker..."
+    THIS="$THIS picker" "$SCRIPTS/hypr/utils/monitors/monitor-picker" "$@"
+    exit $?
+  elif [[ $1 == "toggle" ]]; then
+    shift
+    THIS="$THIS picker" "$SCRIPTS/hypr/utils/monitors/monitor-toggle" "$@"
+    exit $?
+  elif [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  else
+    log --error "Unhandle command: $1" && exit 1
+  fi
+  shift
+done
+
+# If we've reached here then no commands were passed / handled.
+usage && exit 1

env/.local/scripts/hypr/toggle-desktop

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-# Workspace to hide everything in
-HIDE_WS="special:hidden"
-
-# File to store original workspace ID
-STATE_FILE="/tmp/hypr_hide_state"
-
-# Get current workspace ID
-CUR_WS=$(hyprctl -j activeworkspace | jq -r '.id')
-
-# Check if we're currently hidden
-if [[ -f "$STATE_FILE" ]]; then
-  # Restore windows
-  ORIG_WS=$(cat "$STATE_FILE")
-  for win in $(hyprctl -j clients | jq -r ".[] | select(.workspace.name | contains(\"$HIDE_WS\")) | .address"); do
-    hyprctl dispatch movetoworkspace "$ORIG_WS,address:$win"
-    hyprctl dispatch workspace "$ORIG_WS"
-  done
-  rm "$STATE_FILE"
-else
-  # Hide all windows (move to special hidden workspace)
-  for win in $(hyprctl -j clients | jq -r ".[] | select(.workspace.id == $CUR_WS) | .address"); do
-    hyprctl dispatch movetoworkspace "$HIDE_WS,address:$win"
-    hyprctl dispatch togglespecialworkspace "$HIDE_WS"
-  done
-  rm "$STATE_FILE"
-  echo "$CUR_WS" >"$STATE_FILE"
-fi

env/.local/scripts/hypr/toggle-internal-monitor

@@ -1,12 +0,0 @@
-#!/bin/zsh
-#
-# Toggles the state of the internal laptop monitor, which is useful
-# when I'm connected to an external monitor / docks.
-
-monitor="eDP-1"
-
-if hyprctl monitors | grep -q "$monitor"; then
-  hyprctl keyword monitor "$monitor,disable" 1>/dev/null
-else
-  hyprctl keyword monitor "$monitor,enable" 1>/dev/null
-fi

env/.local/scripts/hypr/uninstall-desktop-app

@@ -50,7 +50,7 @@ log() {
 ############################## MAIN ##############################
 
 source "$SCRIPTS/hypr/logging"
-setup-logging "/tmp/$THIS.log" "$THIS"
+setup-logging "$THIS.log" "$THIS"
 
 if [[ -z $XDG_DATA_HOME ]]; then
   log "xdg data home is not set"

env/.local/scripts/hypr/utils-launcher

@@ -1,7 +1,16 @@
 #!/usr/bin/env bash
 
+set -e
+set -o nounset
+set -o pipefail
+
+FZF_DEFAULT_OPTS=${FZF_DEFAULT_OPTS:-""}
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename $THIS_FILE)
+LOG_LABEL=$(basename $THIS_FILE)
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-$LOG_LABEL.log}
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+XDG_CONFIG_HOME=${XDG_CONFIG_HOME}
 
 usage() {
   cat <<EOF
@@ -28,8 +37,6 @@ launch_flag="0"
 
 rows=()
 invocation_id=${RANDOM}
-XDG_CONFIG_HOME=${XDG_CONFIG_HOME}
-SCRIPTS=${SCRIPTS}
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 == "-c" ]] || [[ $1 == "--config" ]]; then
@@ -77,7 +84,7 @@ generate_rows() {
 
 # Setup logging file and label.
 source "$SCRIPTS/hypr/logging"
-setup-logging "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 if [[ -z $XDG_CONFIG_HOME ]]; then
   log "XDG_CONFIG_HOME not set"
@@ -102,7 +109,7 @@ fi
 file_data=$(cat $config_file)
 
 # Setup colors before calling fzf.
-[[ -z ${FZF_DEFAULT_OPTS} ]] &&
+[[ -z $FZF_DEFAULT_OPTS ]] &&
   [[ -f $SCRIPTS/catppuccin-colors ]] &&
   source $SCRIPTS/catppuccin-colors
 
@@ -111,7 +118,8 @@ sel=$(
   printf "%s\n" "${rows[@]}" |
     fzf --style=full --footer="$(footer)" --with-nth=2 --delimiter='|' \
       --preview-label='[ Command ]' \
-      --preview="$SCRIPTS/hypr/preview-stats utils {2} $config_file"
+      --preview="$SCRIPTS/hypr/utils/fzf/preview-stats utils {2} $config_file" \
+      --preview-window='down,30%'
 )
 
 log "Selection: $sel"

env/.local/scripts/hypr/utils/fzf/preview-stats

@@ -1,8 +1,14 @@
 #!/usr/bin/env bash
 
+set -e
+set -o nounset
+set -o pipefail
+
 SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename $THIS_FILE)
+LOG_LABEL=$(basename $THIS_FILE)
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-$LOG_LABEL.log}
 
 usage() {
   cat <<EOF
@@ -11,9 +17,9 @@ Utility for getting fzf preview data.
 
 USAGE:
 
-  $ $THIS [MODE] [ARG...]
+  $ $THIS [COMMAND] [ARG...]
 
-MODES:
+COMMAND:
 
   monitor <id> <keys>:            Get monitor data, optionally providing keys to return.
   window <address> <keys>:        Get window data, optionally providing keys to return.
@@ -52,7 +58,7 @@ call_jq() {
 
 # Setup logging file and label.
 source "$SCRIPTS/hypr/logging"
-setup-logging "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 # Early out check for help flag
 if [[ $@ =~ -h ]] || [[ $@ =~ --help ]]; then
@@ -63,9 +69,9 @@ elif [[ ! $# -ge 2 ]] || [[ $# -gt 3 ]]; then
   exit 1
 fi
 
-mode=$1
-arg=$2
-arg2=$3 # either optional keys or utils config.
+mode=${1:-""}
+arg=${2:-""}
+arg2=${3:-""} # either optional keys or utils config.
 
 if [[ $mode == "monitor" ]]; then
   call_jq monitors "select(.id == $arg)" "$arg2"
@@ -81,7 +87,7 @@ elif [[ $mode == "utils" ]]; then
   fi
   desc=$(jq -C ".[] | select(.name == \"$arg\") | .description" $config)
   exec=$(jq -C ".[] | select(.name == \"$arg\") | .exec" $config)
-  echo -e "\n${desc[@]}\n\n"
+  echo -e "\n${desc[@]}\n\n" | fmt -w ${FZF_PREVIEW_COLUMNS:-80}
   echo -e "\e[31mEXEC:\e[0m $exec\n"
 else
   log --error "Unexpected mode: $mode"

env/.local/scripts/hypr/utils/logs/logs-picker

@@ -0,0 +1,61 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_DIR=${LOG_DIR:=""}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+FZF_DEFAULT_OPTS=${FZF_DEFAULT_OPTS:-""}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+footer() {
+  cat <<'EOF'
+   __               
+  / /  ___  ___ ____
+ / /__/ _ \/ _ `(_-<
+/____/\___/\_, /___/
+          /___/     
+EOF
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+if [[ -z $LOG_DIR ]]; then
+  echo "Log directory not setup properly!" && exit 1
+fi
+
+# Setup colors before calling fzf.
+[[ -z $FZF_DEFAULT_OPTS ]] &&
+  [[ -f $SCRIPTS/catppuccin-colors ]] &&
+  source $SCRIPTS/catppuccin-colors
+
+sel=$(
+  /bin/ls $LOG_DIR/*.log |
+    sed 's#.*/##; s/\..*$//' | # cleans to only show file name, excluding the path and '.log'
+    fzf --style=full \
+      --footer="$(footer)" \
+      --preview-label='[ Logs ]' \
+      --preview='echo ""; bat $LOG_DIR/{}.log' \
+      --preview-window="down"
+)
+
+if [[ -z $sel ]]; then
+  log --error "No selection" && exit 1
+fi
+
+bat $sel.log

env/.local/scripts/hypr/utils/monitors/monitor-picker

@@ -1,8 +1,15 @@
 #!/usr/bin/env bash
 
+set -e
+set -o nounset
+set -o pipefail
+
 SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename $THIS_FILE)
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+FZF_DEFAULT_OPTS=${FZF_DEFAULT_OPTS:-""}
 
 usage() {
   cat <<EOF
@@ -12,13 +19,13 @@ like to pass. The id of the monitor is returned from this script upon selection.
 
 USAGE:
 
-  $ $THIS [OPTIONS] [FZF_OPTIONS...]
-
-OPTIONS:
+  $ $THIS [flags] [FZF_OPTIONS...]
 
+FLAGS:
   --no-default-footer:    Disable the 'Monitors' footer (supplying your own footer disables default as well).
   --no-preview:           Disables the monitor stats preview window.
   -h | --help:            Show this help page.
+
 EOF
 }
 
@@ -76,7 +83,7 @@ generate_rows() {
 
 # Setup logging file and label.
 source "$SCRIPTS/hypr/logging"
-setup-logging "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 [[ -z ${FZF_DEFAULT_OPTS} ]] &&
   [[ -f $SCRIPTS/catppuccin-colors ]] &&
@@ -91,7 +98,7 @@ sel=""
 
 # For some reason can't get the preview to work when setting in the fzf_opts array.
 if [[ $no_preview_flag == "0" ]]; then
-  sel=$(printf '%s\n' "${rows[@]}" | fzf "${fzf_opts[@]}" --preview="$SCRIPTS/hypr/preview-stats monitor {1}")
+  sel=$(printf '%s\n' "${rows[@]}" | fzf "${fzf_opts[@]}" --preview="$SCRIPTS/hypr/utils/fzf/preview-stats monitor {1}")
 else
   sel=$(printf '%s\n' "${rows[@]}" | fzf "${fzf_opts[@]}")
 fi

env/.local/scripts/hypr/utils/monitors/monitor-toggle

@@ -0,0 +1,76 @@
+#!/usr/bin/env bash
+
+# Toggles the state of the internal laptop monitor, which is useful
+# when I'm connected to an external monitor / docks.
+set -o nounset
+set -o pipefail
+set -e
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+usage() {
+  cat <<EOF
+
+Toggles the state (enable/disable) of a monitor.
+
+USAGE:
+
+  $ $THIS <flags> <id>
+
+FLAGS:
+  -i | --internal:      Toggle the internal monitor.
+  -h | --help:          Show this help page.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+toggle() {
+
+  local monitor="${1:-""}"
+
+  if [[ -z $monitor ]]; then
+    log --error "No monitor supplied." && exit 1
+  fi
+
+  if hyprctl monitors | grep -q "$monitor"; then
+    hyprctl keyword monitor "$monitor,disable" 1>/dev/null
+  else
+    hyprctl keyword monitor "$monitor,enable" 1>/dev/null
+  fi
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+monitor=""
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  elif [[ $1 == "-i" ]] || [[ $1 == "--internal" ]]; then
+    monitor="eDP-1"
+  else
+    log --error "Unhandled option: $1" && exit 1
+  fi
+  shift
+done
+
+if [[ -z $monitor ]]; then
+  read -p "Monitor id: " monitor
+fi
+
+toggle $monitor

env/.local/scripts/hypr/utils/webapp/install

@@ -3,7 +3,9 @@
 # Adapted from https://github.com/basecamp/omarchy/tree/master?tab=readme-ov-file
 
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename "$THIS_FILE")
+THIS=${THIS:-$(basename "$THIS_FILE")}
+LOG_FILE=${LOG_FILE:-"$THIS.log"}
+LOG_LABEL=$(basename "$THIS_FILE")
 
 function usage() {
   cat <<EOF
@@ -237,7 +239,7 @@ EOF
 
 # Setup logging file and label
 source "$SCRIPTS/hypr/logging"
-setup-logging "/tmp/$THIS.log" "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 export LOG_ENABLE_DRY_RUN="$dry_run"
 
 if [[ -z "$XDG_DATA_HOME" ]]; then
@@ -287,7 +289,7 @@ set_icon_ref
 
 # Check that an exec command is set, or default to the 'launch-webapp' script.
 if [[ -z $exec_cmd ]]; then
-  exec_cmd="$SCRIPTS/hypr/launch-webapp $app_url"
+  exec_cmd="$SCRIPTS/hypr/webapp launch $app_url"
 fi
 
 log "\e[032mCreating web app:\e[0m $desktop_file"

env/.local/scripts/hypr/utils/webapp/launch

@@ -1,8 +1,11 @@
 #! /usr/bin/env bash
 
 # Adapted from https://github.com/basecamp/omarchy/tree/master?tab=readme-ov-file
+SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 THIS_FILE=${BASH_SOURCE[0]}
-THIS=$(basename "$THIS_FILE")
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$(basename "$THIS_FILE")}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 
 usage() {
   cat <<EOF
@@ -26,7 +29,7 @@ NOTES:
 
 Any extra arguments after '--' get passed directly to the browser invocation.
   
-  $ launch-webapp https://example.com -- --some-random-flag-for-browser=1
+  $ $THIS https://example.com -- --some-random-flag-for-browser=1
 
 Any options passed in prior to the '--' get sent to the 'launch' script, so you can pass
 options that are not specifically shown here, but the ones shown would be the most commonly
@@ -41,11 +44,10 @@ of the special workspace.
 EOF
 }
 
-browser="chromium.desktop"
+browser="brave-browser.desktop"
 url=""
 launch_args=()
 app_args=""
-SCRIPTS="${SCRIPTS:-$HOME/.local/scripts}"
 
 while [[ $# -gt 0 ]]; do
   if [[ $1 =~ ^--special ]] || [[ $1 =~ ^-s ]]; then
@@ -83,7 +85,7 @@ log() {
 
 # setup logging file and label
 source "$SCRIPTS/hypr/logging"
-setup-logging "/tmp/$THIS.log" "$THIS"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 
 if [[ -z $url ]]; then
   log --error "Must supply a url." && usage && exit 1
@@ -92,9 +94,9 @@ fi
 # Any left over args after "--"
 app_args="$@"
 
-log "URL: $url"
-log "Launch args: ${launch_args[@]}"
-log "App args: ${app_args}"
+log "Launching URL: $url"
+log "	Launch args: ${launch_args[@]}"
+log "	App args: ${app_args}"
 
 $SCRIPTS/hypr/launch "${launch_args[@]}" "$(pattern)" \
   setsid uwsm app -- $(sed -n 's/^Exec=\([^ ]*\).*/\1/p' {~/.local,~/.nix-profile,/usr}/share/applications/$browser 2>/dev/null | head -1) --app="$url" "$app_args"

env/.local/scripts/hypr/utils/windows/close-windows

@@ -1,9 +1,14 @@
 #!/usr/bin/env bash
 
+set -e
+set -o nounset
+set -o pipefail
+
 THIS_FILE=${BASH_SOURCE[0]}
 LOG_LABEL=$(basename "$THIS_FILE")
 # Allows script name to be set when called from a parent script or defaults to filename.
 THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-$LOG_LABEL.log}
 
 usage() {
   cat <<EOF
@@ -98,9 +103,13 @@ close() {
   fi
 }
 
+################################################################################
+# MAIN
+################################################################################
+
 # Setup logging file and label
 source "$SCRIPTS/hypr/logging"
-setup-logging "$LOG_LABEL"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
 export LOG_ENABLE_DRY_RUN="$dry_run_flag"
 
 if [[ $active_workspace_flag == "1" ]]; then

env/.local/scripts/hypr/utils/windows/focus-window

@@ -0,0 +1,84 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+usage() {
+  cat <<EOF
+
+Focuses a window, properly handling windows in special workspaces. If no address is supplied,
+then we will read address from stdin.
+
+USAGE:
+  
+    $ $THIS <flags> <address>
+
+FLAGS:
+  -h | --help:      Show this help page.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+# Prevent hyprctl dispatch calls from printing to the console.
+hypr_dispatch() {
+  hyprctl dispatch "$@" >/dev/null 2>&1
+  return $?
+}
+
+focus_window() {
+  local address=$1
+  log "Focusing window, selection: $address"
+  local name=$(hyprctl clients -j | jq -r ".[] | select(.address == \"$address\") | .workspace.name")
+  local active_workspace=$(hyprctl activewindow -j | jq -r ".workspace.name")
+
+  log "Window workspace: '$name', active workspace: '$active_workspace'"
+  if [[ $name =~ ^special ]] && [[ ! $active_workspace == $name ]]; then
+    log "Toggling special workspace prior to focusing window."
+    name="${name#special:*}"
+    hypr_dispatch togglespecialworkspace $name
+  fi
+  hypr_dispatch focuswindow "address:$address"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+address=""
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  else
+    address=$1
+  fi
+  shift
+done
+
+if [[ -z $address ]]; then
+  log "Reading address from stdin."
+  # If an address not supplied then read from stdin, which allows us to pipe the address into
+  # this command.
+  read -p "Window address: " address
+fi
+
+if [[ -z $address ]]; then
+  log --error "No address supplied." && exit 1
+fi
+
+focus_window $address && exit $?

env/.local/scripts/hypr/utils/windows/window-action-picker

@@ -7,19 +7,31 @@ set -o pipefail
 SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
 THIS_FILE=${BASH_SOURCE[0]}
 LOG_LABEL=$(basename "$THIS_FILE")
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
 THIS=${THIS:-$LOG_LABEL}
+FZF_DEFAULT_OPTS=${FZF_DEFAULT_OPTS:-""}
+
+usage() {
+  cat <<EOF
+
+Shows a picker of actions that can be performed on a window. The chosen action will
+be performed on the window.
+
+USAGE:
+
+  $ $THIS <flags> <address>
+
+FLAGS:
+  -a | --active:      Uses the active window to perform the selected action.
+  --show-back:        Shows a back option in the list of choices, useful when called from another script.
+  -h | --help:        Show this help page.
+
+EOF
+}
 
 address=""
 move_silent_flag="0"
-should_go_back="0"
-
-if [[ $# == 1 ]]; then
-  address="$1"
-else
-  # If an address not supplied then read from stdin, which allows us to pipe into
-  # this command.
-  read -r address
-fi
+show_back_choice="0"
 
 # Logging utility function, use in place of echo.
 log() {
@@ -42,19 +54,6 @@ hypr_dispatch() {
   return $?
 }
 
-focus_window() {
-  log "Focusing window, selection: $address"
-  local name=$(hyprctl clients -j | jq -r ".[] | select(.address == \"$address\") | .workspace.name")
-  local active_workspace=$(hyprctl activewindow -j | jq -r ".workspace.name")
-  log "Window workspace: '$name', active workspace: '$active_workspace'"
-  if [[ $name =~ ^special ]] && [[ ! $active_workspace == $name ]]; then
-    log "Toggling special workspace prior to focusing window."
-    name="${name#special:*}"
-    hypr_dispatch togglespecialworkspace $name
-  fi
-  hypr_dispatch focuswindow "address:$address"
-}
-
 parse_workspace_id() {
   local workspace_name=""
   read -r workspace_name
@@ -62,8 +61,7 @@ parse_workspace_id() {
   log "Parsing selected workspace name: $workspace_name"
 
   if [[ -z $workspace_name ]]; then
-    log --error "No workspace set to move window to."
-    exit 1
+    log --error "No workspace set to move window to." && exit 1
   fi
 
   if [[ $workspace_name =~ ^special ]]; then
@@ -86,11 +84,107 @@ move_to_workspace() {
     action="movetoworkspacesilent"
   fi
 
-  $SCRIPTS/hypr/workspace-picker --return-name-if-special --header="Select a workspace to move window to:" |
+  $SCRIPTS/hypr/workspacectl picker --return-name-if-special --header="Select a workspace to move window to:" |
     parse_workspace_id |
     xargs -I{} hyprctl dispatch "$action" "{},address:$address" >/dev/null 2>&1
 
   return $?
+}
+
+toggle_floating() {
+  log "Toggling floating..."
+  local did_handle="0"
+  local should_prompt_for_size="1"
+  local is_floating=$(hyprctl clients -j | jq ".[] | select(.address == \"$address\") | .floating")
+
+  if [[ $is_floating == "false" ]]; then
+    gum confirm "Would you like to set the size of the float?"
+    should_prompt_for_size=$?
+  fi
+
+  if [[ $should_prompt_for_size == "0" ]]; then
+    log "Prompting for size..."
+    placeholder="Example: 80% or 1000"
+    width=$(gum input --placeholder="$placeholder" --header="Window Width:")
+    height=$(gum input --placeholder="$placeholder" --header="Window Height:")
+    if [[ -n $width ]] && [[ -n $height ]]; then
+      "$SCRIPTS/hypr/utils/windows/window-toggle-floating" "$address" --width "$width" --height "$height"
+      did_handle="1"
+    else
+      log --warning "Did not get both width: '$width' and height: '$height', not setting window size."
+    fi
+  fi
+
+  if [[ $did_handle == "0" ]]; then
+    "$SCRIPTS/hypr/utils/windows/window-toggle-floating" "$address"
+  fi
+
+}
+
+make_selection() {
+  log "Prompting for window action..."
+  local choices=(
+    "$address:Focus the selected window.:Focus window"
+    "$address:Close the selected window.:Close window"
+    "$address:Close the selected window and go back to the window list.:Close window and back"
+    "$address:Move the selected window to another workspace, focusing the window.\n\nA workspace picker will be presented to choose which workspace to move to.:Move to workspace"
+    "$address:Move the selected window to another workspace, without focusing the window.\n\nA workspace picker will be presented to choose which workspace to move to.:Move to workspace - silent"
+    "$address:Toggles the selected windows floating property.\n\nIf the window is not floating then you will be prompted if you want to set the size or not.:Toggle floating"
+    "$address:Copy the window address to the system clipboard:Copy to clipboard"
+  )
+  if [[ $show_back_choice == "1" ]]; then
+    log "Adding show back choice option."
+    choices+=("$address:Move back to window picker and reload windows.:Back")
+  fi
+  choices+=("$address:Quit and close the application:Quit")
+  local choice=$(
+    printf "%s\n" "${choices[@]}" |
+      fzf --style=full --footer="$(action_footer)" \
+        --delimiter=':' --with-nth=3 \
+        --header="What should we do with the selected window?" \
+        --preview-label="[ Description ]" \
+        --preview='echo -e {2} | fmt -w ${FZF_PREVIEW_COLUMNS:-40}; echo -e "\n\n\e[35mSelected Window:\e[0m"; "$SCRIPTS/hypr/utils/fzf/preview-stats" window {1} "{title, workspace, address, floating}";'
+  )
+  # Exit if non-zero code returned from making selection.
+  [[ $? -gt 0 ]] && log --error "Unexpected fzf status: $?" && exit $?
+  # Set choice to just the action portion.
+  choice="${choice##*:}"
+  echo "$choice"
+}
+
+# Set appropriate flags based on the choice and perform the action on the window address.
+handle_selection() {
+  local resp="done"
+  local choice=""
+  read -r choice
+  log "Action Choice: $choice"
+  if [[ $choice == "Quit" ]]; then
+    log "Quitting..."
+  elif [[ $choice == "Close window" ]]; then
+    log "Closing window..."
+    "$SCRIPTS/hypr/utils/windows/close-windows" "$address"
+  elif [[ $choice == "Close window and back" ]]; then
+    log "Closing window and setting should go back flag."
+    "$SCRIPTS/hypr/utils/windows/close-windows" "$address"
+    resp="back:close"
+  elif [[ $choice == "Copy to clipboard" ]]; then
+    log "Copied window address to the clipboard."
+    echo $address | wl-copy
+  elif [[ $choice == "Focus window" ]]; then
+    "$SCRIPTS/hypr/utils/windows/focus-window" $address
+  elif [[ $choice == "Move to workspace" ]]; then
+    move_to_workspace
+  elif [[ $choice == "Move to workspace - silent" ]]; then
+    move_silent_flag="1"
+    move_to_workspace
+    resp="back"
+  elif [[ $choice == "Toggle floating" ]]; then
+    toggle_floating
+  elif [[ $choice == "Back" ]]; then
+    resp="back"
+  fi
+
+  echo "$resp"
 
 }
 
@@ -100,65 +194,47 @@ move_to_workspace() {
 
 # Setup logging file and label.
 source "$SCRIPTS/hypr/logging"
-setup-logging "$LOG_LABEL"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  elif [[ $1 == "-a" ]] || [[ $1 == "--active" ]]; then
+
+    class=$(hyprctl activewindow -j | jq -r '.class')
+    if [[ $class == "com.ghostty.windowctl" ]]; then
+      # Select the previously focused window if we were launched in a new terminal window.
+      address=$(hyprctl clients -j | jq -r '.[] | select(.focusHistoryID == 1) | .address')
+    else
+      # Select the active address if not.
+      address=$(hyprctl activewindow -j | jq -r '.address')
+    fi
+
+  elif [[ $1 == "--show-back" ]]; then
+    show_back_choice="1"
+  else
+    address=$1
+  fi
+  shift
+done
+
+# If an address not supplied then read from stdin, which allows us to pipe the address into
+# this command.
+if [[ -z $address ]]; then
+  read -p "Window address: " address
+fi
+
+# Load colors if they haven't been loaded already.
+[[ -z ${FZF_DEFAULT_OPTS} ]] &&
+  [[ -f $SCRIPTS/catppuccin-colors ]] &&
+  source $SCRIPTS/catppuccin-colors
 
 if [[ -z $address ]]; then
   log --error "Address not set."
   exit 1
 fi
 
-log "Prompting for window action..."
-
-choices=(
-  "Focus the selected window.:Focus window"
-  "Close the selected window.:Close window"
-  "Close the selected window and go back to the window list.:Close window and back"
-  "Move the selected window to another workspace, focusing the window.\n\nA workspace picker will be presented to choose which workspace to move to.:Move to workspace"
-  "Move the selected window to another workspace, without focusing the window.\n\nA workspace picker will be presented to choose which workspace to move to.:Move to workspace - silent"
-  "Copy the window address to the system clipboard:Copy to clipboard"
-  "Move back to window picker and reload windows.:Back"
-  "Quit:Quit"
-)
-preview_action="$SCRIPTS/hypr/preview-stats window $address \"{title, workspace, address}\""
-choice=$(
-  printf "%s\n" "${choices[@]}" |
-    fzf --style=full --footer="$(action_footer)" \
-      --delimiter=':' --with-nth=2 \
-      --header="What should we do with the selected window?" \
-      --preview-label="[ Description ]" \
-      --preview="echo -e {1}; echo -e '\n\n\e[35mSelected Window:\e[0m'; $preview_action;"
-)
-if [[ $? -gt 0 ]]; then
-  log --error "Unexpected fzf status: $?"
-  exit $?
-fi
-
-# Set choice to just the action portion.
-choice="${choice#*:}"
-log "Action Choice: $choice"
-
-# Set appropriate flags based on the choice and perform the action on the window address.
-if [[ $choice == "Quit" ]]; then
-  exit 0
-elif [[ $choice == "Close window" ]]; then
-  "$SCRIPTS/hypr/close-windows" "$address"
-elif [[ $choice == "Close window and back" ]]; then
-  "$SCRIPTS/hypr/close-windows" "$address"
-  should_go_back="1"
-elif [[ $choice == "Copy to clipboard" ]]; then
-  echo $address | wl-copy
-elif [[ $choice == "Focus window" ]]; then
-  focus_window
-elif [[ $choice == "Move to workspace" ]]; then
-  move_to_workspace
-elif [[ $choice == "Move to workspace - silent" ]]; then
-  move_silent_flag="1"
-  move_to_workspace
-elif [[ $choice == "Back" ]]; then
-  should_go_back="1"
-fi
-
-# TODO: Maybe we just echo out a 'back' message.
-if [[ $should_go_back == "1" ]]; then
-  exit 69
-fi
+res=$(make_selection | handle_selection)
+log "Action result: $res"
+# Returns "done | back | back:close" for parent script to know how to handle.
+echo "$res"

env/.local/scripts/hypr/utils/windows/window-picker

@@ -0,0 +1,113 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename $THIS_FILE)
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-$LOG_LABEL.log}
+
+uses_supplied_footer="0"
+fzf_opts=()
+rows=()
+workspace_id=""
+
+usage() {
+  cat <<EOF
+
+Select from currently available windows, returning the selected window's address.
+
+USAGE:
+
+  $ $THIS <flags> [FZF_OPTIONS]
+
+FLAGS:
+  -w | --workspace <id>:    Only show windows for the given workspace.
+  -h | --help:              Show this help page.
+
+NOTES:
+
+By default, we show a footer and header unless specifically passed in as extra arguments / options.
+Any other options or arguments are passed directly to 'fzf'.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+footer() {
+  cat <<'EOF'
+ _      ___         __             
+| | /| / (_)__  ___/ /__ _    _____
+| |/ |/ / / _ \/ _  / _ \ |/|/ (_-<
+|__/|__/_/_//_/\_,_/\___/__,__/___/
+EOF
+}
+
+generate_rows() {
+  local addresses=()
+
+  if [[ -n $workspace_id ]]; then
+    addresses=$(hyprctl clients -j | jq -r ".[] | select(.workspace.id == $workspace_id) | .address")
+  else
+    addresses=$(hyprctl clients -j | jq -r ".[] | .address")
+  fi
+
+  for address in $addresses; do
+    title=$(hyprctl clients -j | jq -r ".[] | select(.address == \"$address\") | .title")
+    # Replace in occurrences of what we use as delimiter in the title, so they're presented
+    # correctly.
+    title=${title//|/-}
+    rows+=("$address|$title")
+  done
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  elif [[ $1 =~ ^--footer ]]; then
+    uses_supplied_footer="1"
+    fzf_opts+=("$1")
+  elif [[ $1 == "-w" ]] || [[ $1 == "--workspace" ]]; then
+    shift
+    workspace_id=$1
+  else
+    fzf_opts+=("$1")
+  fi
+  shift
+done
+
+if [[ $uses_supplied_footer == "0" ]]; then
+  fzf_opts+=("--footer=$(footer)")
+fi
+
+generate_rows
+
+sel=$(
+  printf '%s\n' "${rows[@]}" |
+    fzf --style=full "${fzf_opts[@]}" \
+      --preview-label='[ Window Stats ]' --delimiter='|' --with-nth=2 \
+      --preview='$SCRIPTS/hypr/utils/fzf/preview-stats window {1}'
+)
+status=$?
+
+[[ -z $sel ]] && exit 1
+
+# revove everything but the address portion.
+sel=${sel%%|*}
+echo "$sel"
+exit $status

env/.local/scripts/hypr/utils/windows/window-toggle-floating

@@ -0,0 +1,113 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+address=""
+width=""
+height=""
+
+usage() {
+  cat <<EOF
+
+Utility for toggling a windows floating property.
+
+If no address is supplied and '--active' flag is not set, then we will read address from stdin.
+
+USAGE:
+
+  $ $THIS <flags> <address>
+
+FLAGS:
+  -a | --active:        Toggles floating of the active window.
+  -w | --width <n>:     Set a width of the floating window, can be pixels or percent (ex. 80%).
+  -h | --height <n>:    Set a height of the floating window, can be pixels or percent (ex. 80%).
+  --help:               Show this help page.
+
+EOF
+
+}
+
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+# Suppress output of hyprctl
+hypr_dispatch() {
+  hyprctl dispatch "$@" >/dev/null 2>&1 && return $?
+}
+
+toggle_floating() {
+  hypr_dispatch togglefloating "address:$address"
+}
+
+resize_window() {
+  if [[ -n $width ]] && [[ -n $height ]]; then
+    log "Resizing window: width: $width, height: $height"
+    hypr_dispatch resizewindowpixel exact "$width $height,address:$address"
+  fi
+
+  echo "$address"
+
+}
+
+center_window() {
+  local address=""
+  read -r address
+  local activeaddress=$(hyprctl activewindow -j | jq -r '.address')
+  if [[ $address == $activeaddress ]]; then
+    log "Centering window..."
+    hypr_dispatch centerwindow
+  fi
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging
+source "$SCRIPTS/hypr/logging"
+setup-logging "$LOG_FILE" "$LOG_LABEL"
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "--help" ]]; then
+    usage && exit 0
+  elif [[ $1 == "-w" ]] || [[ $1 == "--width" ]]; then
+    shift
+    width=$1
+  elif [[ $1 == "-h" ]] || [[ $1 == "--height" ]]; then
+    shift
+    height=$1
+  elif [[ $1 == "-a" ]] || [[ $1 == "--active" ]]; then
+    address=$(hyprctl activewindow -j | jq -r '.address')
+  else
+    address=$1
+  fi
+  shift
+done
+
+if [[ -z $address ]]; then
+  read -p "Window address: " address
+fi
+
+if [[ -z $address ]]; then
+  log --error "No address was supplied" && exit 1
+fi
+
+log "Begin toggling floating for: '$address'"
+
+floating=$(hyprctl clients -j | jq ".[] | select(.address == \"$address\") | .floating")
+log "Is currently floating: $floating"
+
+toggle_floating
+
+if [ ! "$floating" == "true" ]; then
+  resize_window | center_window
+fi

env/.local/scripts/hypr/utils/windows/windowctl-picker

@@ -0,0 +1,101 @@
+#!/usr/bin/env bash
+
+set -e
+set -o nounset
+set -o pipefail
+
+SCRIPTS=${SCRIPTS:-$HOME/.local/scripts}
+THIS_FILE=${BASH_SOURCE[0]}
+LOG_LABEL=$(basename "$THIS_FILE")
+THIS=${THIS:-$LOG_LABEL}
+LOG_FILE=${LOG_FILE:-"$LOG_LABEL.log"}
+
+usage() {
+  cat <<EOF
+
+Shows a window picker and window details, then prompts for an action that can be 
+performed on the selected window.
+
+USAGE:
+
+  $ $THIS <flags>
+
+FLAGS:
+  -a | --active:      Select action to perform on active window.
+  -h | --help:        Show this page.
+
+EOF
+}
+
+# Logging utility function, use in place of echo.
+log() {
+  logging log --source "$THIS_FILE" "$@"
+}
+
+handle_selected_value() {
+  local selection=""
+  read -r selection
+
+  if [[ -z $selection ]]; then
+    log "No selected value."
+    return 1
+  fi
+
+  log "Prompting for action, window: '$selection'"
+
+  local res=$(echo "$selection" | "$SCRIPTS/hypr/utils/windows/window-action-picker" --show-back)
+  log "Action callback result: $res"
+  echo "$res"
+
+}
+
+prompt_for_window_selection() {
+  local selected_value=$("$SCRIPTS/hypr/utils/windows/window-picker")
+  local status=$?
+  if [[ $status -ne 0 ]]; then
+    exit $status
+  fi
+  echo "$selected_value"
+}
+
+################################################################################
+# MAIN
+################################################################################
+
+# Setup logging file and label.
+source "$SCRIPTS/hypr/logging"
+setup-logging $LOG_FILE $LOG_LABEL
+should_quit="0"
+address=""
+
+log "Starting $THIS..."
+
+while [[ $# -gt 0 ]]; do
+  if [[ $1 == "-h" ]] || [[ $1 == "--help" ]]; then
+    usage && exit 0
+  elif [[ $1 == "-a" ]] || [[ $1 == "--active" ]]; then
+    address=$(hyprctl activewindow -j | jq -r '.address')
+  elif [[ -n $1 ]]; then
+    address=$1
+  fi
+  shift
+done
+
+trap 'log "Stoping..."; should_quit="1"' SIGINT
+
+while [[ $should_quit -eq 0 ]]; do
+
+  if [[ -n $address ]]; then
+    res=$(echo $address | handle_selected_value)
+  else
+    res=$(prompt_for_window_selection | handle_selected_value)
+  fi
+
+  if [[ ! $res =~ ^back ]]; then
+    should_quit=1
+  elif [[ $res == "back:close" ]]; then
+    sleep 0.3 # allow time for windows close, to prevent showing closed windows.
+  fi
+
+  log "Should quit: $should_quit"
+done