diff --git a/project/Report.md b/project/Report.md
index 89bf443..46066c9 100644
--- a/project/Report.md
+++ b/project/Report.md
@@ -37,9 +37,9 @@ abstract: |
 
 # Contents
 
-1. [Introduction](#home-performance-report)
+1. [Introduction](#introduction)
    1. [Your Goals](#your-goals)
-1. [Leakage](#how-leaky-is-your-house)
+1. [Air Leakage](#how-leaky-is-your-house)
    1. [Which Areas Leak The Most](#which-areas-leak-the-most)
 1. [Observations](#observations)
    1. [HVAC](#hvac-observations)
@@ -60,7 +60,7 @@ abstract: |
    1. [TESP]
    1. [WC][wc]
 
-# Home Performance Report
+## Introduction
 
 Thank you for having us to your home for a home performance assessment. I hope that it was beneficial. We learned a lot
 about your home and your goals during the brief visit. So, let’s jump in to some of the things discovered.
@@ -73,27 +73,18 @@ Once you read the report you’ll have 3 options: do nothing, pick and choose up
 difficult goals or complex projects. These options are discussed at the end of the report as well as our leanings for
 your home.
 
-```{=latex}
-\begin{center}
-```
-
 ![goals](img/goals.png){width=50%}
 
-```{=latex}
-\end{center}
-```
+### Your goals:
 
-## Your goals:
-
-<!-- NOTE: This should probably be a table in most cases, with a rank.-->
 <!-- WARNING: Add goals here -->
 
 | Goal | Rank |
-| ---- | ---: |
+| :--- | ---: |
 
 \newpage
 
-# How Leaky Is Your House
+## How Leaky Is Your House
 
 <!-- NOTE: Several of the variables used in this section are defined in vars.sh
            Do not change them here, instead update them in the vars.sh file.
@@ -113,7 +104,7 @@ blower door number was {{ home.cfm50  }} [CFM50] for the approximately {{ home.s
 
 \newpage
 
-## Which Areas Leak The Most
+### Which Areas Leak The Most
 
 While on site, zonal pressure diagnostics were performed to determine which areas leak the most. Below is a table
 summary of the areas with the most room for improvement.
@@ -130,11 +121,11 @@ summary of the areas with the most room for improvement.
 
 \newpage
 
-# Observations
+## Observations
 
 The below sections are observations about the current HVAC system and the home.
 
-## HVAC Observations
+### HVAC Observations
 
 <!--  WARNING: Add HVAC observations here. -->
 
@@ -146,7 +137,7 @@ The below sections are observations about the current HVAC system and the home.
    1. Current static pressure is already high.
    1. These problems may become worse when AC is installed.
 
-## Home Observations
+### Home Observations
 
 <!--  WARNING: Add house observations here. -->
 
@@ -155,13 +146,13 @@ The below sections are observations about the current HVAC system and the home.
 
 \newpage
 
-# Load Calculations
+## Load Calculations
 
 Several [load-calculations][load-calculation] were performed on your home to determine the proper equipment sizing for
 this application. Below is a comparison of the [load-calculations][load-calculation] with the current air leakage and
 several improved air leakage targets.
 
-## Your Loads
+### Your Loads
 
 <!-- WARNING: Add the project loads here. -->
 
@@ -189,7 +180,7 @@ improvements were made.
 
 \newpage
 
-# Airflow Assessment
+## Airflow Assessment
 
 While on site, we also measured the total system airflow and static pressure of the system. Static pressure is
 equivalent to the blood pressure of your system and gives us a better understanding of the overall ability for the
@@ -212,7 +203,7 @@ rarely problematic, so it is not focused on much.
 
 \newpage
 
-## Your Static Measurements
+### Your Static Measurements
 
 ![True Flow Report](img/trueflow.png){height=50%}
 
@@ -236,7 +227,7 @@ some static pressures can be improved during the project.
 
 \newpage
 
-## Static Measurements Forecast
+### Static Measurements Forecast
 
 ![True Flow Forecast](img/trueflow-forecast.png){height=50%}
 
@@ -256,7 +247,7 @@ mode.
 
 \newpage
 
-# Summary
+## Summary
 
 The purpose of the home performance assessment is to help find the overlap between the house needs, the goals, and the
 budget to see if there's a viable project.
@@ -289,6 +280,13 @@ Regards,
 
 [Here is a link to all the documents][document-folder]
 
+> **NOTE:**
+>
+> Documents are stored on our internal servers and links to your documents expire in approximately 30 days from the
+> creation of your report, for security reasons. We recommend that you download any documents you would like to keep for
+> your records. If you have troubles then we can send the documents via email or extend the expiration date of the
+> provided document links.
+
 <!-- prettier-ignore-start -->
 
 <!-- NOTE: These are reference links for short form linking in the document.
@@ -312,16 +310,15 @@ Regards,
 
 <!-- default is img/trueflow.png -->
 [trueflow-image]: <{{ links.images.trueflow }}>
-
 <!-- default is img/forecast.png -->
 [trueflow-forecast-image]: <{{ links.images.trueflow_forecast }}>
 
-<!-- NOTE: These links are defined in vars.sh -->
+<!-- IMPORTANT: These links need to be updated. -->
 
-[loads-folder]: <{{ links.documents.loads_folder }}>
-[trueflow-file]: <{{ links.documents.trueflow_file }}>
-[trueflow-forecast-file]: <{{ links.documents.trueflow_forecast_file }}>
-[document-folder]: <{{ links.documents.document_folder }}>
+[loads-folder]: 
+[trueflow-file]: 
+[trueflow-forecast-file]: 
+[document-folder]: 
 <!-- prettier-ignore-end -->
 
 ```